Flanges

Intermediate flange for universal chisel PIECE for Chinese lathes series 300 For chucks: PIECE 125mm Diameter of flange: 125mm Material: Steel Lathe spindle mounting: < / b> Mounting: 55mm Screw axis: 66mm(3x M6) Chuck mounting: Suitable for chuck clamping KUS 125/3 or KUS 125/4 Suitable for 300 series lathes - brands Asist, Proma, Einhell, Sieg, Rotwerk, CQ, MB, JET and lots of other clones The intermediate flange is screwed directly onto the lathe spindle. Before purchasing this flange, remove the flange from the lathe and change the mounting

Intermediate flange with short cone with threaded pins Camlock - semi-finished product Cone size: 5( larger diameter = 82,5mm) Outer diameter of flange: 160mm Axis of clamping pins: 104,8mm Width of body of flange: 29,5mm < br> Material: Cast iron HT300 Tensile strength: 250-350MPa, Hardness: 190-240HBS Composition: Cmax = 2.8-3.2%, SiMax = 1.7-2 , 1%, Mn = 0,9-1,2%, Pmax

Face plate with T-slots, with threaded pins Camlock T-slot: T12(length 50mm) Threads: M8 Camlock D4: Size cone : 4(th diameter = 63,5mm) Outer diameter flanges: 200mm Axis clamps Caps: 82,6mm Width plate â € oLa flanges: 27,5mm Material: Cast iron HT300 Tensile strength: 250-350MPa, Hardness: 190 -240HBS Composition: Cmax = 2.8-3.2%, SiMax = 1.7-2.1%, Mn = 0.9-1.2%, Pmax

TOS IUS universal chuck for MN 80 lathe For chucks: IUS 80mm Flange diameter: 80mm Material: Steel Thread: M 39 × 4

Semi-finished flange for clamping the universal chuck, for lathe MN 80 Diameter of the flange: 80mm The flange is without a machined fitting and without holes for clamping the chuck. A chuck of any brand/manufacturer can be clamped onto this flange after its additional modification. Material: Steel Thread: M 39Af4

TOS IUS universal chuck for MN 80 lathe For chucks: IUS 100mm Diameter flange: 100mm Material: Steel Thread: M 39 × 4

Flange for universal chuck KUS for lathe MN 80 Designed for universal chucks series KUS 100mm from our offer For chucks: IUS 100mm Flange diameter: 100mm Material: Steel Thread: M 39A — 4

Semi-finished flange for clamping universal chuck, for lathe MN 80 Diameter of flange: 100mm Flange is without machined mounting and without holes for chuck clamping. A chuck of any brand/manufacturer can be clamped onto this flange after its additional modification. Material: Steel Thread: M 39Af4

Flange for universal chuck ITEM for lathe MN 80 Designed for universal chucks of the ITEM series 125mm from our offer Diameter Screws: 125mm Material: Steel Thread: M 39A — 4

Semi-finished flange for clamping the universal chuck, for lathe MN 80 Diameter of the flange: 125mm The flange is without a machined fitting and without holes for clamping the chuck. A chuck of any brand/manufacturer can be clamped onto this flange after its additional modification. Material: Steel Thread: M 39Af4

Flange for universal chuck KUS for lathe MN 80 Designed for universal chucks series KUS 100mm from our offer For chucks: IUS 100mm Flange diameter: 80mm Material: Steel Thread: M 39A — 4

Pliers holder type 5C for spindle of lathe SV-18 with taper metr.50 Outer taper: metr.50 Inner taper: 10Â ° Rear cylinder bore diameter 38.0mm Overall housing length: 85mm Material: tool steel Collets 5C can be purchased from us separately in pieces in the design: * Round * Four edges * Hexagon - see related products