Clamps for milling

Milling mandrel for clamping cylindrical socket cutters Clamping cone: according to the selected variant Clamping diameter for cutters: according to the selected variant Length of the clamping part for the milling cutter: according to the selected variant Standard: ČSN 241411 / CSN 24 1411 If you are not sure that you have chosen the right clamp / you are not sure about the standard, you can find a comparison of this standard with other standards in the photos. The goods come from excess stock, unused

Milling mandrel for clamping cylindrical socket cutters, securing with two keys / for milling heads with cylindrical drilling Clamping cone: according to the selected variant Clamping diameter for cutters: according to the selected variant Length of the clamping part for the milling cutter: according to the selected variant Standard: ČSN 241421 / CSN 24 1421 If you are not sure that you have chosen the right clamp / you are not sure about the standard, you can find a comparison of this standard with other standards in the photos. Goods from excess stock, unused

Long milling mandrel for clamping socket cylindrical / circular cutters and saws. Clamping cone: according to the selected variant Clamping diameter for cutters: according to the selected variant Length of the clamping part: according to the selected variant The other end of the mandrel is stored in the bearing of the extendable arm. Standard: ČSN 241431 / CSN 24 1431 Goods from excess stock, unused. Pins may have slight surface corrosion caused by improper storage.

Long milling mandrel with Morse taper for clamping cylindrical / disc cutters and saws. Clamping cone: according to the selected variant Clamping diameter for cutters: according to the selected variant Length of the clamping part: according to the selected variant The other end of the mandrel is stored in the bearing of the extendable arm. Standard: ČSN 241433 / CSN 24 1433 Goods from excess stock, unused. Pins may have slight surface corrosion caused by improper storage.

Clamping collet series: ER 16 Size: according to the selected variant Other dimensions - see the attached catalog sheet Clamping accuracy: 0.015mm Standard: DIN 6499B / 426E For clamping a drill, cutter, countersink, etc. Dimension of collet : Diameter: 16mm Length: 28mm Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture. The collet is also suitable for thermdrill drilling.

Clamping collet series: ER 16 with higher clamping accuracy Size: according to the selected variant Clamping accuracy: 0.005mm Other dimensions - see the attached catalog sheet Standard: DIN 6499B+ / 426EP For clamping a drill, cutter, countersink, etc. Dimension of collet : Diameter: 16mm Length: 28mm Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture. The collet is also suitable for thermdrill drilling.

Precision clamping sealed collet ER 16 for drills / milling cutters with internal cooling Diameter: according to the selected variant Standard: DIN 6499 C / 426EA Usage : For drills with internal cooling Suitable for central cooling of the drill with internal coolant flow. Dimensions of the collet: Diameter: 16mm Length: 28mm Throwability: 0.015mm Max. pressure tested by the manufacturer: 40bar Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture.

Clamping collet series: ER 20 Size: according to the selected variant Other dimensions - see the attached catalog sheet Clamping accuracy: 0.015mm up to a diameter of 10mm (including) Clamping accuracy: 0.020mm over a diameter of 10mm Standard: DIN 6499B / 428E For clamping a drill, cutter, countersink, etc. Dimension of collet : Diameter: 20mm Length: 32mm Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture. The collet is also suitable for thermdrill drilling.

Milling mandrel for clamping cylindrical socket cutters with a transverse groove Clamping cone: according to the selected variant Diameter of the cylindrical part for the socket cutter: according to the selected variant Distance from the collar to the end of the clamping part: according to the selected variant Internal cooling - version AD+B: according to the selected variant Method of clamping the cutter: stones and screw Balance: G6.3 / 12,000 rpm. Standard: DIN 69871 - automatic tool change If you are not sure that you have chosen the right clamp / you are not sure about the standard, you can find a comparison of this standard with other standards in the photos.

NC / CNC weldon clamp for clamping a cutter with a cylindrical shank and a securing surface for a screw Clamping cone: according to the selected variant Clamping diameter for cutter: according to the selected variant Length of the clamping part: according to the selected variant Other dimensions - see product description for individual variants Usage: For machines with manual change Balance: G6.3/12000 rpm Standard: DIN 1835-B, ČSN 247205, DIN 69871-A - automatic tool change If you are not sure that you have chosen the right clamp / you are not sure about the standard, you can find a comparison of this standard with other standards in the photos.

Collet holder, collet head for NC, cylindrical shank Diameter of the clamping shank: according to the selected variant For ER collets: according to the selected variant Length of the clamping part: according to the selected variant Other dimensions - see product description for individual variants Throwability: up to 0.005mm Balance: G2.5 / 20,000 rpm Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture. Usage : Clamping of drills, cutters and other tools with a cylindrical shank As a tap without length compensation and reversal - for clamping taps

Direct milling collet with Morse taper - for direct clamping For a tool with a diameter: according to the selected variant Morse cone : MK2 Internal thread of collet: M8 Other dimensions: see product description for individual variants Usage : For direct clamping of tools with a cylindrical shank The collet is hardened: HRC 44-48 Material: tool steel with high flexibility (65Mn)