Homepage Clamping tools Clamps for milling

Clamps for milling

Product count: 220
  • Milling mandrel for milling head with transverse driving groove , DIN2080

    Milling mandrel for milling head with transverse driving groove , DIN2080

    Milling mandrel for clamping cylindrical socket cutters Clamping cone: according to the selected variant Diameter of the cylindrical part for the socket cutter: according to the selected variant Distance from the collar to the end of the clamping part: according to the selected variant Other dimensions - see product description for individual variants Method of clamping the cutter: stones and screw Standard: DIN 2080 / ČSN241440 - manual tool change If you are not sure that you have chosen the right clamp / you are not sure about the standard, you can find a comparison of this standard with other standards in the photos.

    from 43,63 € with VAT
  • Weldon holder for mills with a cylindrical shank with a flat surface , DIN2080

    Weldon holder for mills with a cylindrical shank with a flat surface , DIN2080

    Weldon clamp for clamping a cutter with a cylindrical shank and a locking surface for a screw Clamping cone: according to the selected variant Clamping diameter for cutter: according to the selected variant Length of the clamping part: according to the selected variant Other dimensions - see product description for individual variants Usage: For machines with manual change Standard: DIN 1835-B, ČSN 247205.1, DIN 2080 - manual tool change If you are not sure that you have chosen the right clamp / you are not sure about the standard, you can find a comparison of this standard with other standards in the photos.

    from 32,71 € with VAT
  • Morse collet for direct clamping MT1

    Morse collet for direct clamping MT1

    Direct milling collet with Morse taper - for direct clamping For a tool with a diameter: according to the selected variant Morse cone : MK1 Internal thread of collet: M6 Other dimensions: see product description for individual variants Usage : For direct clamping of tools with a cylindrical shank The collet is hardened: HRC 44-48 Material: tool steel with high flexibility (65Mn)

    12,64 € with VAT
  • Milling mandrel for milling head with transverse driving groove, CSN 241440, Zbrojovka

    Milling mandrel for milling head with transverse driving groove, CSN 241440, Zbrojovka
    Clearance sale

    Milling mandrel for clamping cylindrical socket cutters Clamping cone: according to the selected variant Diameter of the cylindrical part for the socket cutter: according to the selected variant Distance from the collar to the end of the clamping part: according to the selected variant Other dimensions - see product description for individual variants Method of clamping the cutter: stones and screw Standard: ČSN241440 / DIN2080 - manual tool change If you are not sure that you have chosen the right clamp / you are not sure about the standard, you can find a comparison of this standard with other standards in the photos. Goods from excess stock, unused

    from 50,20 € with VAT
  • Milling mandrel for milling head with transverse driving groove DIN2080 , MCT

    Milling mandrel for milling head with transverse driving groove DIN2080 , MCT

    Milling mandrel for clamping cylindrical socket cutters Clamping cone: according to the selected variant Diameter of the cylindrical part for the socket cutter: according to the selected variant Distance from the collar to the end of the clamping part: according to the selected variant Other dimensions - see product description for individual variants Method of clamping the cutter: stones and screw Standard: DIN 2080 / ČSN241440 - manual tool change If you are not sure that you have chosen the right clamp / you are not sure about the standard, you can find a comparison of this standard with other standards in the photos.

    from 59,24 € with VAT
  • Collet ER clamp on ISO taper, type DIN2080

    Collet ER clamp on ISO taper, type DIN2080

    ISO steep taper collet clamp ISO cone size: according to the selected variant For ER collets: according to the selected variant Length of the clamp (the part that sticks out from the spindle): according to the selected variant Throwability: up to 0.005mm Standard: DIN 2080, DIN 6499 - manual tool change If you are not sure that you have chosen the right clamp / you are not sure about the standard, you can find a comparison of this standard with other standards in the photos. Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture.

    from 36,70 € with VAT
  • Collet ER clamp on ISO taper , type DIN69871

    Collet ER clamp on ISO taper , type DIN69871

    ISO steep taper collet clamp ISO cone size: according to the selected variant For ER collets: according to the selected variant Length of the clamp (the part that sticks out from the spindle): according to the selected variant Balance: G6.3 / 12,000 rpm. , or according to the selected variant Throwability: up to 0.005mm Standard: DIN69871 - automatic tool change If you are not sure that you have chosen the right clamp / you are not sure about the standard, you can find a comparison of this standard with other standards in the photos. Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture.

    from 40,57 € with VAT
  • Collet ER clamp on ISO taper, type BT / JIS6339 MAS

    Collet ER clamp on ISO taper, type BT / JIS6339 MAS

    ISO steep taper collet clamp ISO cone size: according to the selected variant For ER collets: according to the selected variant Length of the clamp (the part that sticks out from the spindle): according to the selected variant Balance: G6.3 / 12,000 rpm. , or according to the selected variant Throwability: up to 0.005mm Standard: JIS B 6339 (MAS BT) - automatic tool change If you are not sure that you have chosen the right clamp / you are not sure about the standard, you can find a comparison of this standard with other standards in the photos. Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture.

    from 37,82 € with VAT
  • Collet ER clamp with morse taper for Czech spindles, securing with a drift nut

    Collet ER clamp with morse taper for Czech spindles, securing with a drift nut

    Morse taper collet clamp - for Czech spindles Morse cone: according to the selected variant For ER type collets: according to the selected variant Performance of the ER matrix: according to the selected variant Other dimensions - see product description for individual variants Usage : The collet clamp has an overseas cone driving nut that fits the spindles of Czech machines. I.e. these clamps are suitable for Czech spindles that carry tools through this nut + thread. These clamps are suitable for all types - Czech, Chinese and other - spindles with a morse taper. Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture.

    from 30,70 € with VAT
  • Collet ER clamp with morse taper

    Collet ER clamp with morse taper

    Morse taper collet clamp Morse cone: according to the selected variant For ER type collets: according to the selected variant Performance of the ER matrix: according to the selected variant Other dimensions - see product description for individual variants Usage : Suitable for all new spindles where the tools are driven only by the internal thread. This type is not suitable for older Czech spindles, which have a so-called "house" - through which the tools (except the thread) drift. Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture. Standard: DIN228A

    from 24,07 € with VAT
  • Milling mandrel combined type , DIN2080

    Milling mandrel combined type , DIN2080

    Combined milling mandrel for end mills with longitudinal or transverse guide groove Clamping cone: according to the selected variant Diameter of the cylindrical part for the socket cutter: according to the selected variant Other dimensions - see attached photo Standard: DIN2080 / ČSN 247227.1 / 24 7227.1 / 24 7227 - manual tool change If you are not sure that you have chosen the right clamp / you are not sure about the standard, you can find a comparison of this standard with other standards in the photos. The delivery includes: a pen, a drive ring and a screw with a cross head. Usage - universal, i.e. : - for milling cutters with drift behind face stones - for cutters with drift through the pen

    from 38,97 € with VAT
  • Precision ER11 collet , DIN6499B / 4008E

    Precision ER11 collet , DIN6499B / 4008E

    Clamping collet series: ER 11 Size: according to the selected variant Other dimensions - see the attached catalog sheet Clamping accuracy: 0.015mm Standard: DIN 6499B / 4008E For clamping a drill, cutter, countersink, etc. Dimension of collet : Diameter: 11mm Length: 18mm Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture. The collet is also suitable for thermdrill drilling.

    8,32 € with VAT

Clamps for milling