Clamps for milling

Set of 16 ER 25 collets on wooden board, ER25 collets Diameters: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16 mm The collets can be clamped: * To a diameter of 2.5 mm by 0.5 mm * From 3mm diameter to 1.0mm Accuracy: 0.005mm Standard: DIN 6499B / 430EP Collet clamping procedure: Snap the collet into the clamping nut - according to the attached picture.

Set of 15 pcs of ER 25 collets made of stainless steel on wooden board, ER25 collets Diameters: 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16 mm Pliers can be clamped: - Up to 2.5 mm diameter 0.5 mm - From 3 mm diameter 1.0 mm Accuracy: 0.005 mm Material: INOX / stainless steel Standard: DIN 6499B / 430ESP Collet clamping procedure: Snap the collet into the clamping nut - according to the attached picture.

ER32 , 19, 20 mm < into the clamping nut - according to the attached picture.

Set of 18 ER 32 collets on wooden board, ER32 collets Diameters: 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20 mm Collets can be clamped: * To a diameter of 2.5 mm by 0, 5mm * From 3mm to 1.0mm diameter Accuracy: 0.005mm Standard: DIN 6499B / 470EP tiny: Snap the collet into the clamping nut - according to the attached picture.

Set of 18 pcs of ER 32 colletted collet for use with tools with internal cooling, ER32 collet Diameters: 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 16, 17, 18, 19, 20 mm Collet clamping: Screw the clamp into the clamping nut - according to the attached picture.

Set of 18 pcs of ER 32 collets made of stainless steel on wooden board, ER32 collets Diameters: 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20 mm Pliers can be clamped: - Up to 2.5 mm diameter 0.5 mm - From 3 mm diameter 1.0 mm Accuracy : 0,005mm Material: INOX / stainless steel Standard: DIN 6499B / 470ESP Collet clamping procedure: Snap the collet into the clamping nut - according to the attached picture .

ER40 ER40 , 19, 20, 22, 26, 30 mm Collet clamping procedure: Screw the clamp into the clamping nut - according to the attached picture.

Set of 21 collets ER 40 on a wooden board, collets ER40 Diameters: 3 , 4 , 5 , 6 , 7 , 8 , 9 , 10 , 11 , 12 , 13 , 14 , 15 , 16 , 17 , 18 . 0.015mm Standard: DIN 6499B / 470E Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture.

Set of 24 sealed collets ER 40 for use with tools with internal cooling, collets ER40 Diameters: 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14 , 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26 mm Collet clamping procedure: Snap the collet into the clamping nut - according to the attached picture. standards Standard: DIN6499C / 472EA Max. pressure tested by the manufacturer: 40bar Tools with internal cooling are not produced with a shank smaller than 3mm, so this set starts from a diameter of 3mm.

Set of straight collets Set contains collets: 3/4/5/6/8/10/12/14/16/18/20/22/24/25 mm Morse taper: MK 4 Internal thread collet: M16 Usage: For direct clamping !Machine with a cylindrical shank