Behind the stones

Milling mandrel for clamping cylindrical socket cutters Clamping cone: according to the selected variant Diameter of the cylindrical part for the socket cutter: according to the selected variant Distance from the collar to the end of the clamping part: according to the selected variant Other dimensions - see product description for individual variants Method of clamping the cutter: stones and screw Standard: DIN 2080 / ČSN241440 - manual tool change If you are not sure that you have chosen the right clamp / you are not sure about the standard, you can find a comparison of this standard with other standards in the photos.

Milling mandrel for clamping cylindrical socket cutters Clamping cone: according to the selected variant Diameter of the cylindrical part for the socket cutter: according to the selected variant Distance from the collar to the end of the clamping part: according to the selected variant Other dimensions - see product description for individual variants Method of clamping the cutter: stones and screw Standard: ČSN241440 / DIN2080 - manual tool change If you are not sure that you have chosen the right clamp / you are not sure about the standard, you can find a comparison of this standard with other standards in the photos. Goods from excess stock, unused

Milling mandrel for clamping cylindrical socket cutters Clamping cone: according to the selected variant Diameter of the cylindrical part for the socket cutter: according to the selected variant Distance from the collar to the end of the clamping part: according to the selected variant Other dimensions - see product description for individual variants Method of clamping the cutter: stones and screw Standard: DIN 2080 / ČSN241440 - manual tool change If you are not sure that you have chosen the right clamp / you are not sure about the standard, you can find a comparison of this standard with other standards in the photos.

Milling mandrel for clamping cylindrical socket cutters with a transverse groove Clamping cone: according to the selected variant Diameter of the cylindrical part for the socket cutter: according to the selected variant Distance from the collar to the end of the clamping part: according to the selected variant Internal cooling - version AD+B: according to the selected variant Method of clamping the cutter: stones and screw Balance: G6.3 / 12,000 rpm. Standard: DIN 69871 - automatic tool change If you are not sure that you have chosen the right clamp / you are not sure about the standard, you can find a comparison of this standard with other standards in the photos.

Milling mandrel for clamping cylindrical socket cutters with a transverse groove Clamping cone: according to the selected variant Diameter of the cylindrical part for the socket cutter: according to the selected variant Distance from the collar to the bearing surface of the socket cutter: according to the selected variant Method of clamping the cutter: stones and screw Balance: G6.3 / 12,000 rpm. Standard: DIN 69871 - automatic tool change If you are not sure that you have chosen the right clamp / you are not sure about the standard, you can find a comparison of this standard with other standards in the photos.

Milling mandrel for clamping cylindrical socket cutters with a transverse groove Clamping cone: according to the selected variant Diameter of the cylindrical part for the socket cutter: according to the selected variant Distance from the collar to the end of the clamping part: according to the selected variant Internal cooling - version AD+B: according to the selected variant Other dimensions: see product description for individual variants Method of clamping the cutter: stones and screw Balance: G6.3 / 12,000 rpm. Standard: JIS B 6339 (MAS BT) - automatic tool change If you are not sure that you have chosen the right clamp / you are not sure about the standard, you can find a comparison of this standard with other standards in the photos.

Milling arbor for clamping insert cylindrical milling cutters Milling method for milling cutter: stones and cross bolt Clamping cone: SK ISO 40 Female thread: M16 Cutter shaft diameter: 27mm Cutter shaft length: 18mm Screw: M12 with cross Standard head Standard: A „A’SN 241442/24 1442 Mandrels are used to clamp pre-driven tools.

Milling arbor for clamping insert milling cutters Milling method for milling cutter: stones and cross bolt Clamping cone: SK ISO 50 Female thread: M24 Cutter shaft diameter: 27mm Cutter shaft length: 18mm Screw: M12 with cross Standard head Standard: ÄOSN 241442/24 1442 Mandrels are used for clamping pre-driven tools.

Milling Cutter for Clamping Socket Roller Cutters Milling Cutter Type: Stones and 4x Bolt Clamping Taper: SK ISO 40 Internal Thread: M16 Diameter: 40mm Clamping Length: 38mm Screw: M20 with cross head Standard: PN 241461 / PN 24 1461 Goods from Above, Unused Uses: These clamps are used for clamping pre-cut tools.

Milling Cutter for Socket Cylindrical Milling Cutters Milling Cutter Type: Stones and 4x M12 Screw Clamping Taper: SK ISO 50 Internal Thread: M24 Diameter: 40mm Length of Clamping Part : 38mm Screw: Cross-head M20 Standard: PN 241461 / PN 24 1461 Goods from Above, Unused Use: These spindles are used for clamping pre-cut tools.

Unused milling mandrel for clamping end mills Method of milling cutter: stones and screw Clamping cone: SK ISO 50 Â!Vit for spindle screw: M24 Cylindrical diameter for end mill: 40mm Cylindrical length Cutter part: 25mm Distance from collar to end of clamping part: 90mm Thread screw for clamping of cutter milling cutters: M20 Standard: PN 247225 /(type 591 006 - 03 )