WNMG
-
Replaceable insert WNMG 080408-TF IC907, Iscar
VBD WTMG 080408 TF IC907 IC907 Series: < Hard Sub-Micron Substrate with TiAlN PVD Coating. Suitable for low to medium cutting speeds. Developed for machining refractory alloys, titanium, austenitic stainless steels and very hard steels. Application - Universal: Steel: P10-P30 Stainless: M05-M20 Cast iron: K15-K30 Non-ferrous metals and plastics: N05-N20 (not recommended, type is CCGT -AS IC20) Superslitin: S05-S20 Hardened: H05-H15 TF: Universal use under normal cutting conditions . Kat. No .: 5596898
In stock11,36 € with VAT -
Replaceable insert DNUX 130504 R11 TT8115, TaeguTec
Lathe insert VBD DNUX 130504 R11 TT8115 Suitable for TDQNR and HDWNR knife brand TaeguTec Radius 0.4mm Coating: CVD, TiCN-Al2O3-TiN Series TT8115 : For high-speed machining, continuous cutting. Excellent wear resistance, heat resistant. Usage: Steel: P05-P20 Standard conditions - see attached photo Cat. no.: 6126678 The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.
In stock11,33 € with VAT -
Interchangeable insert DNUX 130504 L11 TT8115, TaeguTec
Clearance saleVBD DNUX 130504 L11 TT8115 TaeguTec TT8115 Series: For high speed machining, unbroken cut. Excellent resistance to wear, refractory. Usage: Steel: P05-P20 Conditions of use - see enclosed photo Kat. No. 6126679
In stock4,78 € with VAT -
Replaceable insert WNMG 080402-AL H01, Kovonastroje
Turning insert VBD WNMG 080402 - AL H01 Radius: 0,2mm Coating: uncoated, polished surface Series H01: Suitable for routine and finishing operations - for non-ferrous metals and plastics. Usage: Non-ferrous metals and plastics: N05-N25 Cutting conditions: Vc = 100-160m / min fn = 0.03-0.50 mm / rev. ap = 0,1-5,0 mm Type AL: Very sharp breaker for machining aluminum, plastic. Excellent for machining soft non-ferrous metals and their alloys. The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.
In stock6,93 € with VAT -
Replaceable insert WNMG 080404-AL H01, Kovonastroje
Turning insert VBD WNMG 080404 - AL H01 Radius: 0,4mm Coating: uncoated, polished surface Series H01: Suitable for routine and finishing operations - for non-ferrous metals and plastics. Usage: Non-ferrous metals and plastics: N05-N25 Cutting conditions: Vc = 100-200m / min < br> fn = 0.03-0.40 mm / rev. ap = 0,1-5,0 mm Type AL: Very sharp breaker for machining aluminum, plastic. Excellent for machining soft non-ferrous metals and their alloys. The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.
In stock6,93 € with VAT -
Replaceable insert WNMG 080408-AL H01, Kovonastroje
Turning insert VBD WNMG 080408 - AL H01 Radius: 0,8mm Coating: uncoated, polished surface Series H01: Suitable for routine and finishing operations - for non-ferrous metals and plastics. Usage: Non-ferrous metals and plastics: N05-N25 Cutting conditions: Vc = 100-200m / min < br> fn = 0.03-0.40 mm / rev. ap = 0,1-5,0 mm Type AL: Very sharp breaker for machining aluminum, plastic. Excellent for machining soft non-ferrous metals and their alloys. The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.
In stock7,08 € with VAT -
Replaceable insert WNMG 080408E-M; 6630, PRAMET
Inserts insert VBD WNMG 080408 EM; 6630 Double-sided insert Radius: 0,8mm Reel material: 6330 Application: Steel: P15 -P35 Stainless steel(abrasion resistant): M10-M30 Cast iron: K20-K30 Ord. A „. : 80000118 The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.
On request11,04 € with VAT -
Replaceable insert WNMG 080404EL-SI; T9325, PRAMET
VBD WNMG 080404 EL-SI; T9325 Simplex Double sided plate Radius: 0,4mm Material of slicer: T9325 Usage: / b> Roughing Steel: P15-P35 Stainless Steel: M10-M25 Cast Iron: K20-K35 Superslitin (Ni, Co, Fe, Ti) > Kat. No .: 80016581
In stock14,08 € with VAT