T shape

TNMG 160408-GN IC8250 Coating: CVD, TiCN Al2O3 TiCN TiN IC8250 Series: Hard substrate with cobalt admixture with MTCVD TiCN and Al2O3 CVD coating. Suitable for conventional steel machining - roughing up to finishing - wide range of engagement conditions. High hardness and abrasion resistance. Usage: Steel: P10-P35 Stainless Steel: M05-M20 General conditions - see attached photo GN: General use. Kat. No .: 5508131

VBD TNMG 220408 TF IC8250 Coating: CVD, TiCN Al2O3 TiCN TiN IC8250 Series: Hard cobalt substrate with MTCVD TiCN and Al2O3 CVD coating. Suitable for conventional steel machining - roughing up to finishing - wide range of engagement conditions. High hardness and abrasion resistance. Application: Steel: P10-P35 Stainless Steel: M05-M20 TF Type: Universal use in conventional cutting conditions. Kat. No .: 5508135

VBD TCGT 16T304 - AS IC20 Radius 0,4mm Coating: non-coated, polished coating IC20 Series: Suitable for common and finishing operations, roughing of aluminum, cast iron and stainless steel. Usage: Stainless steel: M10-M25 (possible use, type AS not recommended) < Non-Ferrous Metals and Plastics: N05-N25 Supersites: S05-S20 (Use possible, type AS not recommended) > Rugged conditions - see attached photo AS type: Very sharp blade for machining aluminum, plastics. Excellent for machining soft non-ferrous metals and their alloys Cat. No .: 5540021

VBD TCGT 110204 - AS IC20 Radius 0,4mm Coating: non-coated, polished coating IC20 Series: Suitable for common and finishing operations, roughing of aluminum, cast iron and stainless steel. Usage: Stainless steel: M10-M25 (possible use, type AS not recommended) < Non-Ferrous Metals and Plastics: N05-N25 Supersites: S05-S20 (Use possible, type AS not recommended) > Rugged conditions - see attached photo AS type: Very sharp blade for machining aluminum, plastics. Excellent for machining soft non-ferrous metals and their alloys Cat. No .: 5540023

Turning insert VBD TCMT 110202 PF IC807 Radius 0,4mm Coating: TiAlN, PVD A IC807 Series: Rigid sub-micron substrate. Suitable for low to medium cutting speeds. Developed for machining heat-resistant steels, austenitic stainless steels and very hard steels. Application - universal: Steel: P10-P30 Stainless steel: M05-M20 Cast iron: K10-K30 Superalloys: S05-S20 Carbides: H05 -H15 General conditions - see attached photo Type PF: Suitable for finishing operations of common steels and non-traditional alloys. Contact the Company: Kat. Ä. : 5550443 The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Lathe insert VBD TCMT 16T308-19 IC5005 Radius 0.8mm Coating: CVD, TiCN Al2O3 TiN Series IC5005: Hard substrate with multi-layer MTCVD TiCN coating and a thick layer of Al2O3 coating with post-coating surface treatment. It is mainly used for machining nodular cast iron( and other cast iron) at medium to high cutting speeds under stable or slightly unstable conditions. It is used when there is a higher requirement for wear resistance than IC5010 carbide or other grades. Usage: Steel: P05-P15 Cast iron: K05-K20 Hardened steel: H15-H25 Cutting conditions - see attached photo Type -19 : Sharp 7° breaker for roughing operations with medium to large chip removal. Cat. no.: 5550451 The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Turning insert VBD TCMT 090204 F3P IC8250 Radius 0,4mm Coating: CVD, TiCN Al2O3 TiCN TiN < b> Series IC8250: Hard substrates admixed with cobalt mixed with MTCVD TiCN and Al2O3 CVD coating. Suitable for common steel machining - roughing to finishing - a wide range of cutting conditions. High hardness and resistance to sharp wear and tear. Usage: Steel: P10-P35 Stainless steel: M05-M20 Terms - see attached photo Type F3P : for routine and finishing operations during steel machining. Low cutting forces due to the positive sharpness providing very reliable performance and tool life. Contact the Company: Kat. Ä. : 5566881 The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

TNMG 160412-M3P IC8250 Coating: CVD, TiCN Al2O3 TiCN TiN IC8250 Series: Hard substrate with cobalt admixture with MTCVD TiCN and Al2O3 CVD coating. Suitable for conventional steel machining - roughing up to finishing - wide range of engagement conditions. High hardness and abrasion resistance. Usage: Steel: P10-P35 Stainless Steel: M05-M20 M3P: for steel machining, good chip removal, small cutting forces, smooth clean surface. Kat. No .: 5567504

Turning insert VBD TPMR 160304 IC830 Radio 0,4mm Coating: PVD, AlTiN TiN A IC830 Series: Suitable for intermittent cutting and roughing of stainless steel, conventional steels and heat-resistant alloys. High rigidity and resistance to wear and tear. Usage: Steel: P20-P40 Stainless steel: M25-M35 Superalloys: S15-S30 Terms and conditions - see attached photo Contact the Company: Kat. Ä. : 5568587 The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

VBD TPMR 110304 IC830 IC830 Series: Suitable for intermittent cutting and roughing of stainless steel, classical steels and heat-resistant alloys. High stiffness and wear resistance. Usage: Steel: P20-P40 Stainless Steel: M25-M35 Superslitz: S15-S30 Terms and conditions - see attached photo Cat. No. 5568591

Turning insert VBD TNMG 160408-GN IC830 Radius 0,8mm Coating: PVD, AlTiN TiN IC830 Series: Suitable for intermittent cutting and roughing of stainless steel, conventional steels and heat-resistant alloys. High rigidity and resistance to wear and tear. Application: Steel: P20-P40 Stainless steel: M25-M35 Superalloys: S15-S30 Terms - see attached photo Type GN: General purpose. Contact the Company: Kat. Ä. : 5568598 The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Turning insert VBD TPMR 160308 IC830 Radius 0,8mm Coating: PVD, AlTiN TiN A IC830 Series: Suitable for intermittent cutting and roughing of stainless steel, conventional steels and heat-resistant alloys. High rigidity and resistance to wear and tear. Usage: Steel: P20-P40 Stainless steel: M25-M35 Superalloys: S15-S30 Terms and conditions - see attached photo Contact the Company: Kat. Ä. : 5568605 The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.