Steep cone
-
Reduction sleeve SK ISO 40/30, DIN2080
Reducing insert - reduction for milling cutter DIN2080 ISO40 / ISO30, ISO40 / 30 External steep taper: DIN2080 - ISO40 Internal steep taper DIN2080 - ISO30 Total Length: 150mm For tools with manual tool change according to DIN2080 ISO40 It is possible to insert a tool according to DIN2080 ISO30 or BT30% into the reduction 28JIS 6339B MAS) Standard: DIN2080 The package includes an M12 Allen screw, which clamps the tool in this reduction and then the whole this clamp the reduction to the spindle via the spindle screw.
In stock59,93 € with VAT -
Reduction sleeve SK ISO 50/40, DIN2080
Reduction insert - reduction for milling cutter DIN2080 ISO50 / ISO40, ISO50 / 40 External steep taper: DIN2080 - ISO50 Internal steep taper DIN2080 - ISO40 Total Length: 210mm For tools with manual tool change according to DIN2080 ISO50 It is possible to insert a tool according to DIN2080 ISO40 or BT40% into the reduction 28JIS 6339B MAS) Standard: DIN2080 Included in the package is an M16 Allen screw, which clamps the tool in this reduction and then this whole clamp the reduction to the spindle via the spindle screw.
In stock95,74 € with VAT -
Reduction sleeve SK ISO 40/30, ČSN 241480 with replaceable stones
Reducing sleeve for short cutter, ISO40 / ISO30, ISO40 / 30 ISO40 outer shear cone ISO30 inner straight cone Overall length (without stones): 110mm < br> For tools according to DIN2080 and JIS B 6339 / MAS BT / STN 241480
In stock65,92 € with VAT -
Reduction sleeve SK ISO 50/40, ČSN 241480 with replaceable stones
Reducing insert - reduction for milling machine through short, ISO50/ISO40, ISO50/40 External steep cone ISO50 (without thread, through reduction) Internal steep cone ISO40 Total length (without drift stones): 150mm For tools according to DIN2080 and JIS B 6339 /MAS BT/ Standard: ČSN 241480
In stock105,11 € with VAT -
Reduction sleeve SK ISO 50/40 DIN69871 type B, MCT
Reducing insert - reduction for milling machine through short, ISO50/ISO40, ISO50/40B with long clamping screw External steep cone ISO50 Internal steep cone ISO40 A = 70mm D = 75mm Type B - long clamping screw for DIN69871 and MAS BT tools (JIS 6339 B) Cat. no.: 59103702
On request132,00 € with VAT -
Reducing sleeve SK ISO 50/40 type A, MCT
Reducing insert - reduction for milling machine through short, ISO50/ISO40, ISO50/40A with short clamping screw Outer steep cone ISO50 Inner steep cone ISO40 Total length ( without drift. stones): 150mm L = 50mm D = 70mm For tools according to DIN2080 and ČSN 220432 Cat. no.: 59103703
On request145,20 € with VAT -
Reduction sleeve 40 / MK4 - 60 DIN2080, through for clamping cutters
Recommended ✓Extra short reduction insert with morse cavity, ISO40 / MK4, 40/4, 40x4 - . Internal cone: Morse, MK 4 Length: 60 mm (specifies the length of the case that will protrude out of the machine) Standard: replacement for DIN 2080, ČSN 247213, 220432 Strength: Case quenched, then ground (like all others). This type of case was manufactured in the 1960s as an accessory for TOS milling machines Usage: Clamp / mandrel for milling cutters < / b> with Taper Shank MK4 For Clamping with ISO40 Conical Milling Machine Clamping Procedure: After inserting the sleeve into the spindle, the sleeve is fixed over two screws firmly to the spindle machinery. The tool is inserted directly into the sleeve, the sleeve is through, so the tool is tightened directly, in the case of the MK4 cone with the M16 screw.
In stock133,81 € with VAT -
Reduction sleeve SK ISO 50/30, ČSN 241480
ISO50 / ISO30 Straight Straightener ISO50 Straight Straight Cone ISO30 Inner Straight Cone Overall Length (without Stones): 122mm For Tools By Standard DIN2080 and JIS B 6339 / MAS DIN standards now available in electronic format (PDF) ČSN 241480
In stock65,52 € with VAT -
Reduction bushing SK ISO 50/5, ČSN 241481, Zbrojovka
Clearance saleReducing insert - reduction for milling machine through short, ISO50/MK5, ISO50/5 Outer steep taper ISO50 Inner steep taper morse 5 Total length: 150mm For tools - milling cutters or other reduction bushings with MK5 cone Standard: old Czech milling reduction - custom production 19xx, predecessor of ČSN 241481 Also applicable for DIN2080 - manual tool change (through reduction)
On request114,12 € with VAT