Size 16
-
Interchangeable insert TN 16ER050M; T8030, threaded, PRAMET
Removable Threaded Thread Insert TN 16ER050M Cutting Metric Thread, M 0,5mm Application: Steel: P25-P40 Stainless steel: M20-M35 Cast iron: K20-K40 Non-Ferrous Metals (Aluminum and Copper): N15-N30 Superslitins (Ni, Co, Fe, Ti): S15-S25 > Cat. No. 80017692
In stock19,88 € with VAT -
Replaceable insert TN 16EL100M, T8030, threaded, PRAMET
Removable Shaft Thread Insert TN 16EL100M Size: 16 Gradient: 1,0 mm Height (by Cut): 3,47mm Slices for metric thread cutting, pitch M 1,0mm Material: T8030 Usage: Steel: P25-P40 Stainless steel: M20-M35 Cast iron: K20-K40 Non-Ferrous Metals (Aluminum and Copper): N15-N30 Superslitins (Ni, Co, Fe, Ti): S15-S25 > Cat. No .: 80017714
On request21,21 € with VAT -
Interchangeable insert TN 16EL110W, T8030, threaded, PRAMET
Clearance saleRemovable Shaft Thread TN 16EL110W BSW, BSF Inch Cutting Slices and G Thread with W 11 Paths per inch Material of Slicer: T8030 Application: Steel: P25-P40 Stainless Steel (Abrasion Resistant) : M20-M35 Cast iron: K20-K40 Non-Ferrous Metals (Aluminum and Copper): N15-N30 Superslitins (Ni, Co, Fe, Ti) H25 Cat. No .: 80017739
In stock26,49 € with VAT -
Replaceable insert TN 16ER190W; T8030, threaded, PRAMET
Clearance saleRemovable Shaft Thread Insert TN 16ER190W Size: 16 Creep: 19 Strokes per inch Height (By Cut): 3,47mm Inner Cutting Slices BSW, BSF and G Thread with 19 W Walks per inch Material of Slicer: T8030 Application: Steel: P25-P40 Stainless Steel (Abrasion Resistant) : M20-M35 Cast iron: K20-K40 Non-Ferrous Metals (Aluminum and Copper): N15-N30 Superslitins (Ni, Co, Fe, Ti) H25 Cat. No .: 80017751
In stock21,08 € with VAT -
Interchangeable insert TN 16NR120W; T8030, threaded, PRAMET
Clearance saleTN 16NR120W Height (by Cut): 3,61mm Cutting Slit Whitworth Thread: 12 Goes per inch > Use: Steel: P25-P40 Stainless Steel: M20-M35 Cast Iron: K20-K40 Non-ferrous Metals: N15-N30 Superslitz: S15-S25 -H25 80017767
On request22,49 € with VAT -
Interchangeable insert TN 16NR190W; T8030, threaded, PRAMET
Clearance saleTN 16NR190W Height (by Cut): 3,61mm Whitworth Cutting Slices and Tubing Thread W and G: 19 Strokes per inch Application: Steel: P25-P40 Stainless Steel: M20-M35 Cast Iron: K20-K40 Non Ferrous Metals: N15-N30 S15-S25 < br> Hardcars: H15-H25 80017769
In stock21,08 € with VAT -
Replaceable insert TN 16 ER 080 W U 9035, threaded
Clearance saleTN 16 ER 080 W 9035 Art: Nr. 29690500 Slices for cutting Whitworth thread of climb W 8 strokes per inch. Slice material is suitable for machining steels, stainless steel, cast iron, non-ferrous metals and special alloys.
In stock6,13 € with VAT -
Replaceable insert TN 16 ER 100 W U 9035, threaded
Clearance saleTN 16 ER 100 W 9035 Art: Nr. 29690506 Sorry, this picture has been deleted and can not be purchased anymore Please look for similar picture bellow @ Slice material is suitable for machining steels, stainless steel, cast iron, non-ferrous metals and special alloys.
In stock6,13 € with VAT