Side

Left holder for exchangeable inserts / knife for external turning, clamping with thumb via clamp from above Clamping dimensions: according to the selected variant Designation of the plates that fit into the holder: according to the selected variant A key for changing the plate is supplied with the goods. The plate is not part of the package, it can be purchased separately. General information on choosing a suitable holder: Holders type "S" - with screw clamping are suitable for common to finishing operations. They are suitable for smaller material removals. The inserts in these holders have a positive insert back, which enables sharper insert geometries and thus the possibility of achieving a better surface quality. Holders of type "P", "M", "T", "C" and "D" with clamping per inch or clamp are suitable for common to roughing operations - they have higher rigidity. The inserts in these holders have a negative (straight) insert back, thanks to which the inserts do not break out / deform so much and it is possible to roughen them with better and to machine even harder machinable materials.

Left holder for inserts / knife for external turning, thumb clamping Clamping dimensions: according to the selected variant Designation of the plates that fit into the holder: according to the selected variant A key for changing the plate is supplied with the goods. The plate is not part of the package, it can be purchased separately.

SK washer for left turning lathe with code: JS_DKJNR_2020 and JS_DKJNR_2525 - see related products JS_DKJNL_2020 and JS_DKJNL_2525 - see related products Pile height: 4mm

Cutter socket MWLNL 2525 M 08, 95 ° Knife for external turning MWLNL-2525M08, 95 ° Knife 25x25 mm Front angle: -6 ° Angle of blade inclination : -6 ° Plate height: 25mm Overall length of knife: 150mm Replaceable slices are marked WNM. 0804 .. (ie WNMA, WNMG, etc.) A wiper blade is also supplied with the goods. This is an alternative to the knife PWLNR or DWLNR

SWACR 2020 K 08, 90 ° Knife size: 20x20 mm Front angle: 0 ° Blade angle: 0 ° Blade height: 20mm Overall length: 125mm Changeable blades have WC .. 0804 .. (ie WCMT 0804 .., WCGT 0804. etc.) The key is provided with the key for changing the slices.

Rotary slicer PTGNL 2525 P 22, 90 ° Rotary knife PTGNL-2525P22, 90 ° Cutter size: 25x25 mm Front angle: -6 ° Angle of inclination blade: -6 ° Plate height: 25mm Overall length of blade: 170mm Interchangeable pads have TNM markings. 2204.- E (ie TNMG 2204 ..- E, TNMA 2204 ..- E, etc.)

Rotary slicer PTGNR 3225 L22 - S, 90 ° Rotary knife PTGNR-3225L22-S, 90 ° Cutter size: 32x25 mm Front angle: -6 ° Blade Angle: -6 ° Platen Hole Height: 32mm Overall Length: 140mm Interchangeable Plates are Marked by TNM. 2204 ..- E (ie TNMG 2204 ..- E, TNMA 2204 ..- E etc.) PN 0516.0

Turning tool SWGCR for inserts WCMT 0503 Size: 10x10mm Axial height: 10mm Total length: 80mm Clamping hole in insert ce: 3,2mm Part includes screw, torx wrench T8 and 1pc of WCMT 050304 TiN plate for steel and stainless steel. Other plates can be purchased - see related products

External right insert holder PWLNR 2525 M 08 , 95° Knife for external turning PWLNR2525M08 , 95° Clamping dimensions of the knife: 25x25mm Height to the edge of the insert: 25mm Total length of the knife: 150mm Replaceable blades are marked WNM. 0804.. (ie. WNMG 0804 , WNMA 0804 , WNMM 0804 etc. ) The plate is not part of the package, can be purchased separately - see related products. Tightening with a socket wrench size 10mm (not included in the package) Over-standard stock Zbrojovka Vsetín - hobby quality.