Reduction sleeve for milling machine

ISO50 / ISO40, ISO50 / 40 < br> For instruments according to DIN2080 and JIS B 6339 / MAS BT / STN 241480

Stainless steel cutting edge S 20 TiN coated Clamping diameter 3,2mm Overall length 47mm Coating: TiN Usage: External edges inner tube Suitable for aluminum, copper, brass, steel, stainless steel and plastic

Metric reduction - insert for metric taper, for machines with UNC spindle thread 5/8" x 11 turns per inch External taper: meter.32 (Dmax=32mm, Dmin=26.8mm - on length 108mm) Inner taper: meter.18 Reducing threaded insert has threads: external M10, internal UNC 5/8 x 11" Max. diameter : 41.7mm ( x height 20mm) Total length : 130mm The metric cone has a taper of 1:20

Extra short reduction insert with morse cavity, ISO40 / MK4, 40/4, 40x4 - . Internal cone: Morse, MK 4 Length: 60 mm (specifies the length of the case that will protrude out of the machine) Standard: replacement for DIN 2080, ČSN 247213, 220432 Strength: Case quenched, then ground (like all others). This type of case was manufactured in the 1960s as an accessory for TOS milling machines Usage: Clamp / mandrel for milling cutters < / b> with Taper Shank MK4 For Clamping with ISO40 Conical Milling Machine Clamping Procedure: After inserting the sleeve into the spindle, the sleeve is fixed over two screws firmly to the spindle machinery. The tool is inserted directly into the sleeve, the sleeve is through, so the tool is tightened directly, in the case of the MK4 cone with the M16 screw.

ISO50 / ISO30 Straight Straightener ISO50 Straight Straight Cone ISO30 Inner Straight Cone Overall Length (without Stones): 122mm For Tools By Standard DIN2080 and JIS B 6339 / MAS DIN standards now available in electronic format (PDF) ČSN 241480

Reducing insert - reduction for milling machine through short, ISO50/MK5, ISO50/5 Outer steep taper ISO50 Inner steep taper morse 5 Total length: 150mm For tools - milling cutters or other reduction bushings with MK5 cone Standard: old Czech milling reduction - custom production 19xx, predecessor of ČSN 241481 Also applicable for DIN2080 - manual tool change (through reduction)

Old Czech type of metric reduction bushing for milling machine - with upper transition connecting screw Outer cone: metric size 32 Inner cone : MK3 Transition screw threads: W5/8" / M12 Standard: corporate standard Dmax: 30mm Total length: 140mm Usage: For clamping cutters and tools with MK3 taper with M12 thread Reduction comes from excess stock.

Old Czech type of metric reduction bushing for milling machine Outer cone: metric size 32 Inner cone : MK3 Pulling thread into the machine spindle: W 5/8" Standard: corporate standard Dmax: 42mm Total length: 140mm Usage: For clamping drills and other tools with MK3 cone with driver The reduction comes from excess stock.