Homepage Metalworking tools Milling Reduction sleeve for milling machine

Reduction sleeve for milling machine

Product count: 43
  • Reduction sleeve ISO/MT, type DIN2080 , screw type

    Reduction sleeve ISO/MT, type DIN2080 , screw type

    Reduction insert, milling reduction with Morse cavity - for clamping tools with internal thread Clamping cone: according to the selected variant Internal Morse cone: according to the selected variant Length of the clamp (the part that sticks out from the spindle): according to the selected variant Design: see product name and photo of individual variants Standard: DIN 2080, ČSN 247211.1 - manual tool change If you are not sure that you have chosen the right clamp / you are not sure about the standard, you can find a comparison of this standard with other standards in the photos.

    from 27,03 € with VAT
  • Reduction sleeve ISO/MK, type DIN2080 tang type

    Reduction sleeve ISO/MK, type DIN2080 tang type

    Reduction insert, milling reduction with Morse cavity - for clamping tools with a driver - drills, countersinks, etc. Clamping cone: according to the selected variant Internal Morse cone: according to the selected variant Length of the clamp (the part that sticks out from the spindle): according to the selected variant Design: see product name and photo of individual variants Standard: DIN 2080, ČSN 247211.1 - manual tool change If you are not sure that you have chosen the right clamp / you are not sure about the standard, you can find a comparison of this standard with other standards in the photos.

    from 20,12 € with VAT
  • Reduction sleeve ISO/MK, type DIN2080 tang type , MCT

    Reduction sleeve ISO/MK, type DIN2080 tang type , MCT

    Reduction insert, milling reduction with Morse cavity - for clamping tools with a driver - drills, countersinks, etc. Clamping cone: according to the selected variant Internal Morse cone: according to the selected variant Length of the clamp (the part that sticks out from the spindle): according to the selected variant Design: see product name and photo of individual variants Standard: DIN 2080, ČSN 247211.1 - manual tool change If you are not sure that you have chosen the right clamp / you are not sure about the standard, you can find a comparison of this standard with other standards in the photos.

    from 41,78 € with VAT
  • Reducer ISO/MK, type DIN2080 screw, MCT

    Reducer ISO/MK, type DIN2080 screw, MCT

    Reduction insert, milling reduction with Morse cavity - for clamping threaded tools - milling cutters Clamping cone: according to the selected variant Internal Morse cone: according to the selected variant Length of the clamp (the part that sticks out from the spindle): according to the selected variant The tool inserted into this reducer is clamped in the inner cone with a screw. Standard: ČSN 247211.1, DIN 2080 Usage: Clamp / mandrel for cutters with a conical shank For clamping in ISO steep taper milling machine - manual tool change (DIN2080)

    from 96,07 € with VAT
  • Reduction sleeve ISO/MT, type DIN69871 , screw type

    Reduction sleeve ISO/MT, type DIN69871 , screw type

    Reduction insert, milling reduction with Morse cavity - for clamping tools with internal thread Clamping cone: according to the selected variant Internal Morse cone: according to the selected variant Length of the clamp (the part that sticks out from the spindle): according to the selected variant Design: see product name and photo of individual variants Standard: DIN 69871, ČSN 247212 - automatic tool change If you are not sure that you have chosen the right clamp / you are not sure about the standard, you can find a comparison of this standard with other standards in the photos.

    from 33,71 € with VAT
    up to -20%
  • Reduction sleeve ISO/MK, type DIN69871 tang type

    Reduction sleeve ISO/MK, type DIN69871 tang type

    Reduction insert, milling reduction with Morse cavity - for clamping tools with a driver - drills, countersinks, etc. Clamping cone: according to the selected variant Internal Morse cone: according to the selected variant Length of the clamp (the part that sticks out from the spindle): according to the selected variant Design: see product name and photo of individual variants Standard: DIN69871 / ČSN 247211 - automatic tool change If you are not sure that you have chosen the right clamp / you are not sure about the standard, you can find a comparison of this standard with other standards in the photos.

    from 32,20 € with VAT
  • Reduction sleeve ISO/MK, type DIN69871 tang type , MCT

    Reduction sleeve ISO/MK, type DIN69871 tang type , MCT

    Reduction insert, milling reduction with Morse cavity - for clamping tools with a driver - drills, countersinks, etc. Clamping cone: according to the selected variant Internal Morse cone: according to the selected variant Length of the clamp (the part that sticks out from the spindle): according to the selected variant Design: see product name and photo of individual variants Standard: DIN69871 / ČSN 247211 - automatic tool change If you are not sure that you have chosen the right clamp / you are not sure about the standard, you can find a comparison of this standard with other standards in the photos.

    from 56,35 € with VAT
  • Reducer ISO/MK, type DIN69871 screw, MCT

    Reducer ISO/MK, type DIN69871 screw, MCT

    Reducing insert, milling reduction with Morse cavity - for clamping threaded tools - milling cutters, etc. Clamping cone: according to the selected variant Internal Morse cone: according to the selected variant Length of the clamp (the part that sticks out from the spindle): according to the selected variant Design: see product name and photo of individual variants Standard: DIN 69871-A, PN 247212 - automatic tool change If you are not sure that you have chosen the right clamp / you are not sure about the standard, you can find a comparison of this standard with other standards in the photos.

    90,07 € with VAT
  • Reduction sleeve ISO/MT, type BT / JIS6339 MAS , screw type

    Reduction sleeve ISO/MT, type BT / JIS6339 MAS , screw type

    Reduction insert, milling reduction with Morse cavity - for clamping tools with internal thread Clamping cone: according to the selected variant Internal Morse cone: according to the selected variant Length of the clamp (the part that sticks out from the spindle): according to the selected variant Design: see product name and photo of individual variants Standard: JIS B 6339 (MAS BT) - automatic tool change If you are not sure that you have chosen the right clamp / you are not sure about the standard, you can find a comparison of this standard with other standards in the photos.

    from 41,91 € with VAT
  • Reduction sleeve ISO/MK, type BT / JIS6339 MAS tang type

    Reduction sleeve ISO/MK, type BT / JIS6339 MAS tang type

    Reduction insert, milling reduction with Morse cavity - for clamping tools with a driver - drills, countersinks, etc. Clamping cone: according to the selected variant Internal Morse cone: according to the selected variant Length of the clamp (the part that sticks out from the spindle): according to the selected variant Design: see product name and photo of individual variants Standard: JIS B 6339 (MAS BT) - automatic tool change If you are not sure that you have chosen the right clamp / you are not sure about the standard, you can find a comparison of this standard with other standards in the photos.

    from 33,54 € with VAT
  • Reduction sleeve MT/MT pass-through type

    Reduction sleeve MT/MT pass-through type

    Reduction - morse insert for clamping tools with internal thread - cutters Outer cone x Inner cone: according to the selected variant Other dimensions: see product description for individual variants Through design, without internal thread Standard: DIN228

    from 6,13 € with VAT
  • Short reduction sleeve MT/MT pass-through type

    Short reduction sleeve MT/MT pass-through type

    Reduction - morse insert for clamping tools with internal thread - cutters Outer cone x Inner cone: according to the selected variant Other dimensions: see product description for individual variants Through design, without internal thread Standard: DIN228

    from 7,24 € with VAT

Free shipping

There is possibility of free shipping. For more information click here.

Fast shipping

If on stock, you will recieve your order in 1 working day.

Store

Most of the goods are available at the shop.

Individual discounts

Are you a loyal customer or do you want to become one? Contact us!

Reduction sleeve for milling machine