ISO / MK

Product count: 12
  • Reduction sleeve ISO/MT, type DIN2080 , screw type

    Reduction sleeve ISO/MT, type DIN2080 , screw type

    Reduction insert, milling reduction with Morse cavity - for clamping tools with internal thread Clamping cone: according to the selected variant Internal Morse cone: according to the selected variant Length of the clamp (the part that sticks out from the spindle): according to the selected variant Design: see product name and photo of individual variants Standard: DIN 2080, ČSN 247211.1 - manual tool change If you are not sure that you have chosen the right clamp / you are not sure about the standard, you can find a comparison of this standard with other standards in the photos.

    from 27,03 € with VAT
  • Reduction sleeve ISO/MK, type DIN2080 tang type

    Reduction sleeve ISO/MK, type DIN2080 tang type

    Reduction insert, milling reduction with Morse cavity - for clamping tools with a driver - drills, countersinks, etc. Clamping cone: according to the selected variant Internal Morse cone: according to the selected variant Length of the clamp (the part that sticks out from the spindle): according to the selected variant Design: see product name and photo of individual variants Standard: DIN 2080, ČSN 247211.1 - manual tool change If you are not sure that you have chosen the right clamp / you are not sure about the standard, you can find a comparison of this standard with other standards in the photos.

    from 20,12 € with VAT
  • Reduction sleeve ISO/MK, type DIN2080 tang type , MCT

    Reduction sleeve ISO/MK, type DIN2080 tang type , MCT

    Reduction insert, milling reduction with Morse cavity - for clamping tools with a driver - drills, countersinks, etc. Clamping cone: according to the selected variant Internal Morse cone: according to the selected variant Length of the clamp (the part that sticks out from the spindle): according to the selected variant Design: see product name and photo of individual variants Standard: DIN 2080, ČSN 247211.1 - manual tool change If you are not sure that you have chosen the right clamp / you are not sure about the standard, you can find a comparison of this standard with other standards in the photos.

    from 41,78 € with VAT
  • Reducer ISO/MK, type DIN2080 screw, MCT

    Reducer ISO/MK, type DIN2080 screw, MCT

    Reduction insert, milling reduction with Morse cavity - for clamping threaded tools - milling cutters Clamping cone: according to the selected variant Internal Morse cone: according to the selected variant Length of the clamp (the part that sticks out from the spindle): according to the selected variant The tool inserted into this reducer is clamped in the inner cone with a screw. Standard: ČSN 247211.1, DIN 2080 Usage: Clamp / mandrel for cutters with a conical shank For clamping in ISO steep taper milling machine - manual tool change (DIN2080)

    from 96,07 € with VAT
  • Reduction sleeve ISO/MT, type DIN69871 , screw type

    Reduction sleeve ISO/MT, type DIN69871 , screw type

    Reduction insert, milling reduction with Morse cavity - for clamping tools with internal thread Clamping cone: according to the selected variant Internal Morse cone: according to the selected variant Length of the clamp (the part that sticks out from the spindle): according to the selected variant Design: see product name and photo of individual variants Standard: DIN 69871, ČSN 247212 - automatic tool change If you are not sure that you have chosen the right clamp / you are not sure about the standard, you can find a comparison of this standard with other standards in the photos.

    from 33,71 € with VAT
    up to -20%
  • Reduction sleeve ISO/MK, type DIN69871 tang type

    Reduction sleeve ISO/MK, type DIN69871 tang type

    Reduction insert, milling reduction with Morse cavity - for clamping tools with a driver - drills, countersinks, etc. Clamping cone: according to the selected variant Internal Morse cone: according to the selected variant Length of the clamp (the part that sticks out from the spindle): according to the selected variant Design: see product name and photo of individual variants Standard: DIN69871 / ČSN 247211 - automatic tool change If you are not sure that you have chosen the right clamp / you are not sure about the standard, you can find a comparison of this standard with other standards in the photos.

    from 32,20 € with VAT
  • Reduction sleeve ISO/MK, type DIN69871 tang type , MCT

    Reduction sleeve ISO/MK, type DIN69871 tang type , MCT

    Reduction insert, milling reduction with Morse cavity - for clamping tools with a driver - drills, countersinks, etc. Clamping cone: according to the selected variant Internal Morse cone: according to the selected variant Length of the clamp (the part that sticks out from the spindle): according to the selected variant Design: see product name and photo of individual variants Standard: DIN69871 / ČSN 247211 - automatic tool change If you are not sure that you have chosen the right clamp / you are not sure about the standard, you can find a comparison of this standard with other standards in the photos.

    from 56,35 € with VAT
  • Reducer ISO/MK, type DIN69871 screw, MCT

    Reducer ISO/MK, type DIN69871 screw, MCT

    Reducing insert, milling reduction with Morse cavity - for clamping threaded tools - milling cutters, etc. Clamping cone: according to the selected variant Internal Morse cone: according to the selected variant Length of the clamp (the part that sticks out from the spindle): according to the selected variant Design: see product name and photo of individual variants Standard: DIN 69871-A, PN 247212 - automatic tool change If you are not sure that you have chosen the right clamp / you are not sure about the standard, you can find a comparison of this standard with other standards in the photos.

    90,07 € with VAT
  • Reduction sleeve ISO/MT, type BT / JIS6339 MAS , screw type

    Reduction sleeve ISO/MT, type BT / JIS6339 MAS , screw type

    Reduction insert, milling reduction with Morse cavity - for clamping tools with internal thread Clamping cone: according to the selected variant Internal Morse cone: according to the selected variant Length of the clamp (the part that sticks out from the spindle): according to the selected variant Design: see product name and photo of individual variants Standard: JIS B 6339 (MAS BT) - automatic tool change If you are not sure that you have chosen the right clamp / you are not sure about the standard, you can find a comparison of this standard with other standards in the photos.

    from 41,91 € with VAT
  • Reduction sleeve ISO/MK, type BT / JIS6339 MAS tang type

    Reduction sleeve ISO/MK, type BT / JIS6339 MAS tang type

    Reduction insert, milling reduction with Morse cavity - for clamping tools with a driver - drills, countersinks, etc. Clamping cone: according to the selected variant Internal Morse cone: according to the selected variant Length of the clamp (the part that sticks out from the spindle): according to the selected variant Design: see product name and photo of individual variants Standard: JIS B 6339 (MAS BT) - automatic tool change If you are not sure that you have chosen the right clamp / you are not sure about the standard, you can find a comparison of this standard with other standards in the photos.

    from 33,54 € with VAT
  • Reduction sleeve 50x3, ČSN 241481

    Reduction sleeve 50x3, ČSN 241481

    Reducing insert, milling cutter ISO50 / MK3, 50/3, 50x3 For taper milling machines: ISO50 Retractable thread thread: M24 Inner taper: Morse, MK 3, thread M12 Standard: A „A’SN 241481 / DIN2080 Application: Clamp / mandrel for milling cutters with taper shank MK3 For clamping in a milling machine with taper ISO50, internal thread M24

    In stock
    87,06 € with VAT
  • Reduction sleeve 40 / MK4 - 60 DIN2080, through for clamping cutters

    Reduction sleeve 40 / MK4 - 60 DIN2080, through for clamping cutters
    Recommended ✓

    Extra short reduction insert with morse cavity, ISO40 / MK4, 40/4, 40x4 - . Internal cone: Morse, MK 4 Length: 60 mm (specifies the length of the case that will protrude out of the machine) Standard: replacement for DIN 2080, ČSN 247213, 220432 Strength: Case quenched, then ground (like all others). This type of case was manufactured in the 1960s as an accessory for TOS milling machines Usage: Clamp / mandrel for milling cutters < / b> with Taper Shank MK4 For Clamping with ISO40 Conical Milling Machine Clamping Procedure: After inserting the sleeve into the spindle, the sleeve is fixed over two screws firmly to the spindle machinery. The tool is inserted directly into the sleeve, the sleeve is through, so the tool is tightened directly, in the case of the MK4 cone with the M16 screw.

    In stock
    132,59 € with VAT

Free shipping

There is possibility of free shipping. For more information click here.

Fast shipping

If on stock, you will recieve your order in 1 working day.

Store

Most of the goods are available at the shop.

Individual discounts

Are you a loyal customer or do you want to become one? Contact us!

ISO / MK