Prismatic lists

This hard jaw is mounted on the movable jaw vice VQC-100 / VQC-100H Jaw dimensions - see attached data sheet

This hard add-on jaw is mounted on the fixed jaw of the vice VQC-100 / VQC-100H Jaw dimensions - see attached catalog blade

This hard additional jaw is mounted on the fixed jaw of the vice VQC-125 / VQC-125H Jaw dimensions - see attached catalog blade

This hard add-on jaw is mounted on the movable jaw of the VQC-100 / VQC-100H vice Jaw dimensions - see attached catalog blade

This hard add-on jaw is mounted on the movable jaw of the vice VQC-125 / VQC-125H Jaw dimensions - see attached catalog blade

Smooth jaw for machine vice VMC-100HV Grinded, hardened.

Smooth jaw for machine vice VMC-130HV Grinded, hardened.

Smooth jaw for machine vice VMC-160HV Grinded, hardened. Setting (height x width): 4.7 x 4.8mm

Smooth jaw for machine vice VMC-160HV Grinded, hardened. The jaw is without an upper attachment

Smooth jaw for machine vice VMC-200HV Grinded, hardened.

Locking pin for sliding jaw - for vice VNC-160H Position: No.6 Diameter of pin: 20mm Diameter: 22mm Diameter: 17mm Total length: 150mm If you have bent this pin, it is because the vise has been pulled above the maximum permissible tightening force. We recommend purchasing a pressure gauge for the vise and setting the vise stop to the maximum permitted tightening force. Attention - this bolt was made in the Czech Republic from quality steel - it is not an original manufacturer's bolt. It is quite probable that if you continue to pull the vise, you will not bend this pin anymore = it can loosen the vice and damage something else. © ho.

Knurled jaw(1pcs 29 for machine vice VNC-125H Position No. 3 Dimensions - same as see appendix cat. list. Brushed, hardened.