Milling

Morse clamp clamp MK 4 x ER 32 15 klaskin MK4xER32 (4xER32) Other clamps available separately Max. Collar Size: 20mm Kit Contains Collet: 2-3mm , 3-4mm , 4-5mm 5-6mm , 6-7mm , 7-8mm , 8-9mm , 9-10mm , 10-11mm , 11-12mm , 12-13mm , 13-14mm , 15-16mm , 17-18mm , 19-20mm Supplied in Plastic Case Running: up to 0.005mm < Collet clamping procedure: Clamp the clamping nut into the clamping nut - according to the attached picture. DIN 228A

Morse Clamp Clamp MK 4 x ER 40 8-Clamp MK4xER40 (4xER40) Other Collet Clamps can be purchased separately Max. collet size: 30mm Set includes collet: 5-6mm , 7-8mm , 9-10mm , 11-12mm , 13-14mm , 15-16mm , 19-20mm , 24-25mm Supplied in plastic case < :

Double Edge Cutter Cutting Width: 4,2mm Number of Teeth: 8 Clamping Shank: 10mm Cutter Length: 60mm

Double-edged / double-toothed end mill 6x24 mm ( 6x24mm ) , 1 cutting edge through the center with cylindrical shank with beveled edge, right-hand cutting with left-hand helix Diameter D (js16) : 6 mm Length blade l : 24mm Total length : 59mm Clamping shank d (h6) : 6mm Number of blades : 2 pcs. ( 2br. ) Face angle: one corner edge is offset in the direction of the material, the other is countersunk - see photos Material: HSS Standard: custom production Usage : Non-ferrous metals and plastic The milling cutter comes from above-standard stock or as custom production - it can be without laser marking. Order no. code: 13504/159D1 6x24 - custom production

Single-edged / single-tooth end mill 6x26 mm ( 6x26mm ) with cylindrical shank with bevelled edge, right-hand cutting with left-hand helix Diameter D (js16) : 6 mm Blade length l : 26mm Total length: 70mm Clamping shank d (h6): 6mm Number of blades: 1 pc. ( 1 pc. ) Material: HSS Standard: custom production Usage: Non-ferrous metals and plastic The milling cutter comes from above-standard stock or as custom production - can be without laser label. Order no. code: 13504/722D1 6x26 - custom production

Ring cutter - set of 3 cutters (1x roughing 1x semi-roughing 1x finishing) Module: M2.5 Angle: 20° x 10° x 10° Marking on cutters: h=5.625mm, h0 = 12.15, Lw=2381 Diameter: 140mm Clamping diameter: 40mm Material: HSS Standard : ČSN 222512 / 22 2512

Ring cutter - set of 2 roughing and finishing cutters) Module: M4 Angle: 20° x 10° x 10° Marking on cutters: h =9.0mm, h0 = 13.89, Lw=2670 Diameter: 160mm Clamping diameter: 40mm Material: HSS Standard: ČSN 222512 / 22 2512

Ring cutter - set of 2 roughing and finishing cutters) Module: M5 Angle: 20° x 10° x 10° Marking on the cutters: h =11.25mm, h0 = 13.89, Lw=2624 Diameter: 160mm Clamping diameter: 40mm Material: HSS Standard: ČSN 222512 / 22 2512

Milling spindle with taper shank for cylindrical milling cutter, Milling cutter pin MK3 thread with M12 internal thread Clamping diameter for milling cutters: 22mm Clamping length: 47mm < br> Screw: M10 with cross head ČSN 241413 Goods coming from abnormative stocks, unused

Long milling mandrel for clamping face milling cutters / circular cutters and saws. Clamping cone: SK ISO 30 Inner thread: M12 Diameter: 16mm Clamping part length: 250mm Total length: 366mm Nut A^14SN 241437: M14x1 , 5 The other end of the mandrel is mounted in the bearing of the extension arm. standards Standard: A „A’SN 241431 / CSN 24 1431 Goods of overstock, not used. Mandrels can have slight surface corrosion due to improper storage.

Milling arbor for clamping insert cylindrical milling cutters Milling method for milling cutter: stones and cross bolt Clamping cone: SK ISO 40 Female thread: M16 Cutter shaft diameter: 27mm Cutter shaft length: 18mm Screw: M12 with cross Standard head Standard: A „A’SN 241442/24 1442 Mandrels are used to clamp pre-driven tools.

Milling arbor for clamping insert milling cutters Milling method for milling cutter: stones and cross bolt Clamping cone: SK ISO 50 Female thread: M24 Cutter shaft diameter: 27mm Cutter shaft length: 18mm Screw: M12 with cross Standard head Standard: ÄOSN 241442/24 1442 Mandrels are used for clamping pre-driven tools.