Milling

MAS BT40 x 45 ° - Bottom part): 45 ° Peak angle (top): 30 ° d1: 15mm d2: 10mm d3: 17mm l1: 60mm l2: 35mm < br> l3: 28mm a °: 60 ° Norm: JIS B 6339, MAS403-1982 Suitable for eg HAAS Material: - according to DIN: 41Cr4 / 42Gr4 - according to EN: 41Cr4

Clamping / clamping / end screw for tool shank with taper ISO 40( 7:24) for automatic change / pull pin, screw M16, M16x45 ° with coolant hole - drilled LAG BT40 x 45 °, abbreviated Top angle 28% bottom): 45 ° ° Top angle Angle 28 top 28 ): 30 ° d1: 15mm d2: 10mm d3: 17mm l1: 57mm l2: 32mm l3: 25mm a °: 45 ° < br> Standard: JIS B 6339, MAS403-1982 Suitable eg. for HAAS / HURCO Material: - according to ČSN: 14 140 - according to DIN: 41Cr4 / 42Gr4 - according to EN: 41Cr4

MAS BT40 x 45 °, 45 ° Peak angle (top): 30 ° d1: 15mm d2: 10mm d3: 17mm l1: 57mm l2: 32mm l3: 25mm a °: 45 ° Norm: JIS B 6339, MAS403-1982 Suitable for eg HAAS Material: br> - according to DIN: 41Cr4 / 42Gr4 - according to EN: 41Cr4

BT40 x 45 ° MAS BT40 x 45 °, sealed with a hole for cooling Top angle of the pin (bottom): 45 ° Top pin angle (top): 30 ° d1: 15mm d2: 10mm d3: 17mm < br> l1: 60mm l2: 35mm l3: 28mm a °: 60 ° Standard: JIS B 6339, MAS403-1982 | Suitable for eg HAAS Material: - to DIN: 41Cr4 / 42Gr4 - to EN: 41Cr4

Clamping / clamping / end screw for tool shank with taper ISO 40(7: 24) for automatic exchange / pull pin, screw M16, M16x45  ° with seal, with hole - drilling MAS BT40 x 45  ° seal with hole for cooling Top angle of the pin(lower parts): 45  °  ° Top angle of the pin( upper part): 30  ° to d1: 15mm to d2: 10mm to d3: 17mm to l1: 60mm to l2: 35mm to l3: 28mm  °: 60  ° Standard: JIS B 6339, MAS403-1982 Suitable for. for HAAS Material: - according to ÄOSN: 14 140 - according to DIN: 41Cr4 / 42Gr4 - according to EN: 41Cr4

MAS BT50 x 30 ° / MAS BT50 x 60 ° < br> Top pin angle (bottom): 30 °, resp. (90 ° - a °) Top Peak Angle (Top): 30 ° d1: 23mm d2: 17mm d3: 25mm l1: 85mm l2: 45mm l3: 35mm a °: 60 ° Norms: JIS B 6339, MAS403-1982 DIN: 41Cr4 / 42Gr4 - according to EN: 41Cr4

MAS BT50 x 45 ° MAS BT50 x 45 ° Pin Head Bottom part): 45 ° Peak angle (top): 30 ° d1: 23mm d2: 17mm d3: 25mm l1: 85mm l2: 45mm < br> l3: 35mm a °: 45 ° Norm: JIS B 6339, MAS403-1982 DIN: 41Cr4 / 42Gr4 - according to EN: 41Cr4

MAS BT50 x 45 ° MAS BT50 x 45 ° MAS BT50 x 45 ° (M24x45 ° with seal, with hole - drilled) sealed with a hole for cooling Top angle of the pin (bottom): 45 ° Top of the pin (top): 30 ° d1: 23mm d2: 17mm d3: 25mm < br> l1: 85mm l2: 45mm l3: 35mm a °: 60 ° Standard: JIS B 6339, MAS403-1982 Suitable for eg HAAS Material: - to DIN: 41Cr4 / 42Gr4 - to EN: 41Cr4

Diamond cutter 30pcs set, set of diamond surface milling cutters Stopka 3,2mm Set contains 30pcs of different technical milling cutters (rotary files) Application: grinding, drilling, engraving on glass, steel, ceramics, light metals, alloys More info on request

Clamp reduction - ISO50 x B 18 insert ISO 50, M24 thread DIN 2080

Reducing insert - reduction for milling machine through short, ISO50/ISO40, ISO50/40B with long clamping screw External steep cone ISO50 Internal steep cone ISO40 A = 70mm D = 75mm Type B - long clamping screw for DIN69871 and MAS BT tools (JIS 6339 B) Cat. no.: 59103702

Reducing insert - reduction for milling machine through short, ISO50/ISO40, ISO50/40A with short clamping screw Outer steep cone ISO50 Inner steep cone ISO40 Total length ( without drift. stones): 150mm L = 50mm D = 70mm For tools according to DIN2080 and ČSN 220432 Cat. no.: 59103703