Homepage Metalworking tools Turning Lathe accessories

Lathe accessories

Product count: 50
  • Improved vernier of longitudinal displacement with measuring to Chinese lathes Proma, Asis

    Improved vernier of longitudinal displacement with measuring to Chinese lathes Proma, Asis

    PROFI set measuring the feed of the main support for Chinese lathes with adjustable scale - vernier / with adjustable zero - fast adjustment The set has an adjustable one compared to the original. vernier - possibility to set zero according to the need for locking with a spindle screw at the front of the wheel. One length = 0,1mm (on the original wheel could not count) Main wheel rotation = 20mm(Original wheel 19,1986mm) Vernier has 200 lengths with a diameter of 63mm, one length marks 0.1mm feed. The description is from the number 0 to 19 mm a total of 20 mm per turn in the direction of rotation in ascending order. The front case also serves as a countertop vernier. The whole set has a powerful impression and is also very stiff compared to Chinese plastic handwheels due to the chosen materials. Suitable for 300 series lathes - brands Asist, Proma, Einhell, Sieg, Rotwerk, CQ, MB, JET and many other clones

    In stock
    305,78 € with VAT
  • Reduction sleeve metric meter. 24x2 through for MN80

    Reduction sleeve metric meter. 24x2 through for MN80

    Metric Reduction 24K MK2 Metric Cone for Lathe Spindle Max. diameter - cylindrical part: 30,5mm (x height 19,8mm) Overall length: 69mm Use: - lathe Suitable for lathes: MN80

    In stock
    68,80 € with VAT
  • Vise for additional support, jaw 50 mm

    Vise for additional support, jaw 50 mm

    Clamp for additional support Jaw width 50mm Jaw opening 45mm Vise height 25mm Compatible, for example, with the support model LC-00433 from our offer

    In stock
    62,32 € with VAT
  • Additional support 100x125 for hobby lathe

    Additional support 100x125 for hobby lathe

    Additional support - milling support, support for hobby lathes Clamping area: 100x125mm Axial feed - aligned with base plate: 65mm Axial feed - maximum !LnA: 80mm Vernier: 1 length of vernier 0,02mm, 1x turn = 2mm Base: 92x80mm Mounting holes: 2x 10mm, pitch 41mm T-grooves: 3x T10, pitch 40mm Bronze nut, feed bronze nut. Prismatic guide with delimiter bar and feed lock option. Application: Mounted on the cross support of the lathe.

    In stock
    143,80 € with VAT
  • Additional support 50x90 for hobby lathe

    Additional support 50x90 for hobby lathe

    Additional support - milling support, support for hobby lathes Clamping area: 50x90mm Axial feed - aligned with base plate: 30mm Axial feed - maximum f!LnAf: 54mm Vernier: 1 length of vernier 0,03mm, 1x turn = 1,5mm Base: 57x50mm Mounting holes: 2x 5mm, pitch 22mm T-grooves: 3x T5,5, pitch 25,5mm 2x T4 on the sides Part is a simple clamping plate. Bronze nut, feed with bronze nut. Prismatic guide with delimiter bar and feed lock option. Application: Mounted on the cross support of the lathe.

    On request
    74,62 € with VAT
  • Bronze spacer nut for MN80 lathe

    Bronze spacer nut for MN80 lathe

    MN 80 Spindle Pin / Coupling for MN 80 Lathe - that the wheel assembly is solid and free of play. The clutch hole is 10H7, the 4mm pen is recessed into the body. This part complements the toothed basic twin wheel 30/20 and also the toothed wheel 30z. Clutch diameter for couplings is 14mm, identical to gearing gears for lathe MN 80

    In stock
    22,93 € with VAT
  • Split nut for feed screw for MN80 lathe

    Split nut for feed screw for MN80 lathe

    Bronze nut for the sliding screw of the longitudinal movement of the main support. Unlike the original switch nut, which is cast iron, this is a bronze, with a thread cut in a coaxial pair of both halves of the nut.

    In stock
    175,83 € with VAT
  • Milling support for lathe 70x150mm for MN80

    Milling support for lathe 70x150mm for MN80

    Milling support for lathe Clamping surface 70x150mm Axial displacement about 80mm 1 piece nonius 0,02mm, 1x turn = 1mm Slot: 3xT10 Distance from rear edge to axis hole: 32.8mm, hole 10mm Bronze nut Adjustable support for the base of the locking base Adjustable axial clearance of the bolt bearing The surfaces of the preparation are carefully angled and ground, all sliding functional surfaces are scraped Material: Angle holder and T-slot table is made of CG25 gray cast iron Nonius, crank and fastener is made of steel Feed screw is made of strong steel < br> Usage: MN80 lathe, or even for other lathes. a high-quality massive product, an absolute perpendicular clamping, supporting and working surfaces and a very smooth running is a matter of course. The workpiece can be clamped over the T grooves with nuts or other accessories (cross divider, vice, etc.) can be screwed onto the table perpendicularly or even longitudinally on the spindle axis.

    In stock
    508,37 € with VAT
  • Improved lyre gears 24z and 30z for MN80 lathe

    Improved lyre gears 24z and 30z for MN80 lathe

    24z and 30z gear wheels for the MN 80 lathe In addition to the original, these wheels have an enlarged hole with sliding bronze which is pressed under huge pressure. Toothed is very courageous. Everything cut. Inner hole: 10mm Wheel force: 10mm Outside diameter: 26mm and 32mm

    In stock
    69,10 € with VAT
  • Knife holder for lathe MN80, 62x62mm, groove 13mm

    Knife holder for lathe MN80, 62x62mm, groove 13mm

    Knife head for lathe MN 80 Dimensions: 62x62mm Height: 34mm (without screws) Screws: 8 x M8 Pin: 10mm Material: Steel

    In stock
    129,95 € with VAT
  • Set of 20 gears for threads and feeds for the MN80 lathe

    Set of 20 gears for threads and feeds for the MN80 lathe

    Complete set of 20 gears for lathe MN-80 for cutting metric, whithwort, modular and diametral pitch(DP) threads. Rolled, material 12 050(C45) Number of teeth in module 1: 25, 25, 30, 35, 38, 40, 44, 45, 50, 55, 56, 57, 60, 64, 65, 70, 72, 75, 80, 90 Dimensions: module 1 up. hole: 14H7 thickness 8 mm groove 4mm For these gears for the composition of the exchange double transmission, you also need Bronze wheel clutch B and C(see related products). In addition, a basic gear wheel 30/20 of(, see related products), which provides a primary gear set in a gear unit worth 20z. To cut a thread where wheel A contains a value other than 20 teeth, you need a gear thread with 30 teeth(see related products) as a tray for wheel A.

    In stock
    275,20 € with VAT
  • Gear wheel 50z for threads and feeds for the MN80 lathe

    Gear wheel 50z for threads and feeds for the MN80 lathe

    Gear wheel - 50 teeth - for the MN-80 lathe for cutting metric, whitwort, modular and diametral pitch (DP) threads. Made by rolling, material 12 050 (C45) Number of teeth in module 1: 55 Dimensions: module 1 up. hole : 14H7 thickness 8mm groove 4mm Bronze wheel coupling B and C (see related products) are also needed for this gear for the interchangeable double gear composition. Furthermore, a basic 30/20z cog (, see related products), is required for a functional transmission, which provides a primary transmission in an assembly with a cog worth 20z. For thread cutting, where wheel A contains a value other than 20 teeth, a thread gear with 30 teeth (see related products) is needed as a tray for wheel A.

    In stock
    15,29 € with VAT

Free shipping

There is possibility of free shipping. For more information click here.

Fast shipping

If on stock, you will recieve your order in 1 working day.

Store

Most of the goods are available at the shop.

Individual discounts

Are you a loyal customer or do you want to become one? Contact us!

Lathe accessories