For face cutters
-
Milling arbor MK 3x22 with transverse driving groove DIN
Milling spindle, spindle clamping pin, for spindle moulders with clamping on stones Clamping cone: MK3, M12 internal thread Clamping diameter for milling cutters: 22mm Length of shaft for socket milling cutter: 18mm Width of stones: 10mm Overall length: 152mm PN 24 1441
On request28,47 € with VAT -
Milling arbor for cylindrical end mills DIN ISO 50x40x60 PN247220
Milling arbor for clamping cylindrical cutters Shank ISO 50 Internal thread in taper ISO 50 is M24 Diameter 40mm Hole lka chucks for milling cutters 60mm M20 screws with cross head < br> A „A’SN 247220 / can also be used for DIN2080 Goods from oversupply, not used  ©
In stock58,75 € with VAT -
Milling arbor for cylindrical end mills DIN ISO 50x60x35 PN247220
Milling arbor for clamping cylindrical cutters Shank ISO 50 Internal thread in taper ISO 50 is M24 Diameter 60mm Hole lka clamping parts for milling cutters 60mm M30 screws with cross head A „A’SN 247220 / can also be used for DIN2080 Goods from oversupply, unused  ©
In stock61,20 € with VAT -
Milling arbor MK 3x22x47, ČSN 241413, Zbrojovka
Milling spindle with taper shank for cylindrical milling cutter, Milling cutter pin MK3 thread with M12 internal thread Clamping diameter for milling cutters: 22mm Clamping length: 47mm < br> Screw: M10 with cross head ČSN 241413 Goods coming from abnormative stocks, unused
On request55,66 € with VAT -
Long milling mandrel SK 30x16x250, ČSN 241431, Zbrojovka
Clearance saleLong milling mandrel for clamping face milling cutters / circular cutters and saws. Clamping cone: SK ISO 30 Inner thread: M12 Diameter: 16mm Clamping part length: 250mm Total length: 366mm Nut A^14SN 241437: M14x1 , 5 The other end of the mandrel is mounted in the bearing of the extension arm. standards Standard: A „A’SN 241431 / CSN 24 1431 Goods of overstock, not used. Mandrels can have slight surface corrosion due to improper storage.
On request48,96 € with VAT -
Milling arbor SK 40x27 for milling cutters with transverse driving groove, ČSN 241442, Zbr
Clearance saleMilling arbor for clamping insert cylindrical milling cutters Milling method for milling cutter: stones and cross bolt Clamping cone: SK ISO 40 Female thread: M16 Cutter shaft diameter: 27mm Cutter shaft length: 18mm Screw: M12 with cross Standard head Standard: A „A’SN 241442/24 1442 Mandrels are used to clamp pre-driven tools.
On request102,81 € with VAT -
Milling arbor SK 50x27 for milling cutters with transverse driving groove, ČSN 241442, Zbr
Clearance saleMilling arbor for clamping insert milling cutters Milling method for milling cutter: stones and cross bolt Clamping cone: SK ISO 50 Female thread: M24 Cutter shaft diameter: 27mm Cutter shaft length: 18mm Screw: M12 with cross Standard head Standard: ÄOSN 241442/24 1442 Mandrels are used for clamping pre-driven tools.
In stock191,42 € with VAT -
Milling arbor SK 40x40, PN 241461, Zbrojovka
Milling Cutter for Clamping Socket Roller Cutters Milling Cutter Type: Stones and 4x Bolt Clamping Taper: SK ISO 40 Internal Thread: M16 Diameter: 40mm Clamping Length: 38mm Screw: M20 with cross head Standard: PN 241461 / PN 24 1461 Goods from Above, Unused Uses: These clamps are used for clamping pre-cut tools.
On request202,19 € with VAT -
Milling arbor SK 50x40, PN 241461, Zbrojovka
Milling Cutter for Socket Cylindrical Milling Cutters Milling Cutter Type: Stones and 4x M12 Screw Clamping Taper: SK ISO 50 Internal Thread: M24 Diameter: 40mm Length of Clamping Part : 38mm Screw: Cross-head M20 Standard: PN 241461 / PN 24 1461 Goods from Above, Unused Use: These spindles are used for clamping pre-cut tools.
In stock210,82 € with VAT -
Milling arbor SK 40x32 combined, PN 247224
Unused milling mandrel combined for clamping insert milling cutters Milling method for milling cutter: stones or pen Clamping cone: SK ISO 40 Insert vit for spindle screw: M16 Cylindrical diameter for end mill: 32mm Cylindrical length Cutter parts: 36mm Distance from collar to end of clamping part: 72mm Thread screw for clamping cutter © zy: M16 Standard: ÄOSN / PN 247224(type 591005 - 03), usable also for machines with DIN2080 Overstock, non-original packaging, missing clamping pen.
In stock58,75 € with VAT -
Milling arbor SK 40x50 combined, PN 247224
Unused milling mandrel combined for clamping insert milling cutters Milling method for milling cutter: stones or pen Clamping cone: SK ISO 40 Insert vit for spindle screw: M16 Cylindrical part diameter for end mill: 50mm Cylindrical length Cutter parts: 46mm Distance from collar to end of clamping part: 80mm Thread screw for clamping cutter © zy: M24 Standard: ÄOSN / PN 247224(type 591005 - 05), usable also for machines with DIN2080 Overstock, non-original packaging, missing clamping pen.
In stock58,75 € with VAT