For drill / milling machine
-
Reversible tapping head M2-M8 - JT6 with torque coupling, VTA7-JT6
Reversible die head suitable for M2-M8 dimensions Length compensation: max. 16mm extrusion Precision clamping - 2pcs Clamping cone: JT6 Screwdriver including collet (s). Thread cutting has an adjustable torque coupling - depending on the tap diameter. After the set depth has been cut, the speed and pitch of the tap will change automatically. Thorns for these thread heads can be purchased in versions MK2 and MK3
In stock469,72 € with VAT -
Reversible tapping head M3-M12 - JT6 with torque coupling, VTA12-JT6
Reversible tapping head suitable for M3-M12 dimensions Length compensation: max. 17mm extrusion Precision clamping - 2pcs. Clamping cone: JT6 Threading is including collet (s). Thread cutting has an adjustable torque coupling - depending on the tap diameter. After the set depth has been cut, the speed and pitch of the tap will change automatically. Thorns for these thread heads can be purchased in versions MK2 and MK3
In stock554,89 € with VAT -
Reverse tapping head M8-M20 with torque coupling, VTA20-M20
Reversible tapping head suitable for M8-M20 dimensions Length compensation: max. 20mm extrusion Precision clamping - 2pcs. Clamping thread: M20 (the mandrel is to be purchased !!!) Screwdriver incl. pliers Screwdriver has an adjustable torque coupling - according to tap diameter. After the set depth has been cut, the speed and pitch of the tap will change automatically. After the set depth is cut, the speed and turn of the tap automatically change. Thread cutting is designed for threading max. M20 according to ISO 529/2283 (shank 14mm). If you have a tap made to DIN376 (16mm stem), it will be necessary to adjust the stem and quadrangle so that it is clamped into the threading.
In stock646,62 € with VAT -
Reversible tapping head M8-M20 mandrel MK3 with torque coupling, VTA20-M20
Reversible tapping head suitable for M8-M20 dimensions Length compensation: max. 20mm extrusion Precision clamping - 2pcs. Clamping thread: M20 Screwdriver incl. collet and mandrel MK3 Screwdriver with adjustable torque coupling - according to tap diameter. After the set depth has been cut, the speed and pitch of the tap will change automatically. After the set depth is cut, the speed and turn of the tap automatically change. Thread cutting is designed for threading max. M20 according to ISO 529/2283 (shank 14mm). If you have a tap made to DIN376 (16mm stem), it will be necessary to adjust the stem and quadrangle so that it is clamped into the threading.
In stock678,85 € with VAT -
Reversible tapping head M8-M20 mandrel MK4 with torque coupling, VTA20-M20
Reversible tapping head suitable for M8-M20 dimensions Length compensation: max. 20mm extrusion Precision clamping - 2pcs. Clamping thread: M20 Screwdriver including MK4 collet and pin Thread cutting has an adjustable torque coupling - according to tap diameter. After the set depth has been cut, the speed and pitch of the tap will change automatically. After the set depth is cut, the speed and turn of the tap automatically change.
In stock678,85 € with VAT -
Thread cutter B16 for collets TC-312, B16-SF12
Screwdriver head for TC 312 for machine taps to DIN371 DIN374 and DIN376 This type (SF) is without length compensation! The torque clutch is set directly on the collet. Clamping range: M1 - M16 (need to buy TC312 collet) Clamping shank: internal cone B16 - Ideal for drills that have a fixed outlet B16, ie a 16mm outer cone that is not Taps are clamped into the TC312 clamps, which need to be purchased separately. The taps are secured in a collet by a square and a clamping shank. The tap is held firmly in the collet, pulling out after the clamping collar is depressed. The colts are secured in the head through the bearing and stones. It is also possible to buy threaded heads for taps made in accordance with JIS and ISO 529, which are not common to us. About 90% of the domestic market consists of taps made according to DIN371,374,376 TC312 clamping bits are not part of a thread cutter - they need to be purchased separately! < Function: The tap is clamped into a suitable TC312 collet which has a pre-set torque clutch or can be fine-tuned as needed.
In stock31,53 € with VAT -
Thread cutter B16 for collets TC-820, B16-SF20
Quick-release tapping head for TC 820 attachments for machine taps according to DIN371 DIN374 and DIN376 This type (SF) is without length compensation! The torque coupling is adjusted directly on the collet. Clamping range of the thread cutter: M5 - M20 ( need to purchase TC820 collets ) Clamping shank: inner cone B16 - Ideal for drills that have a fixed outlet B16, i.e. 16mm outer cone, which cannot be replaced Alternatively, it can be clamped on ordinary drill mandrels with an external cone B16 - see attached photos Total length: 80mm Method of clamping the tap: The taps are clamped in TC820 collets, which need to be purchased separately. The taps are secured in the collet by the square and the clamping shank. The tap is held firmly in the collet, pulled out after pressing the clamping collar. The collets are secured in the head via the bearing and stones. To the threading head, it is also possible to purchase attachments for taps made according to JIS and ISO 529 standards, which are not common in our country. Approximately 90% of the domestic market consists of taps made according to DIN371,374,376 standards Clamping collets TC820 are not part of the tap - they need to be purchased separately! Function: The tap is clamped in a suitable collet TC820, which has a torque coupling already preset, or it can be fine-tuned as needed.
In stock26,11 € with VAT -
Thread cutter B18 for collets TC-820, B18-SF20
Quick-release tapping head for TC 820 attachments for machine taps according to DIN371 DIN374 and DIN376 This type (SF) is without length compensation! The torque coupling is adjusted directly on the collet. Clamping range of the thread cutter: M5 - M20 ( need to purchase TC820 collets ) Clamping shank: inner cone B18 - Ideal for drills that have a fixed outlet B18, i.e. 16mm outer cone, which cannot be replaced Alternatively, it can be clamped on ordinary drill mandrels with an external cone B18 - see attached photos Total length: 80mm Method of clamping the tap: The taps are clamped in TC820 collets, which need to be purchased separately. The taps are secured in the collet by the square and the clamping shank. The tap is held firmly in the collet, pulled out after pressing the clamping collar. The collets are secured in the head via the bearing and stones. To the threading head, it is also possible to purchase attachments for taps made according to JIS and ISO 529 standards, which are not common in our country. Approximately 90% of the domestic market consists of taps made according to DIN371,374,376 standards Clamping collets TC820 are not part of the tap - they need to be purchased separately! Function: The tap is clamped in a suitable collet TC820, which has a torque coupling already preset, or it can be fine-tuned as needed.
In stock26,11 € with VAT -
NC thread cutter 32mm for collets TC-312, ST32-SF12
Screwdriver head for TC 312 for machine taps to DIN371 DIN374 and DIN376 This type (SF) is without length compensation! The torque clutch is set directly on the collet. Clamping range: M1 - M16 (need to buy TC312 collet) Clamping shank: 32mm, cylindrical Clamping length: 70mm Clamping method: < / b> The taps are clamped into the TC312 clamps, which need to be purchased separately. The taps are secured in a collet by a square and a clamping shank. The tap is held firmly in the collet, pulling out after the clamping collar is depressed. The colts are secured in the head through the bearing and stones. It is also possible to buy threaded heads for taps made in accordance with JIS and ISO 529, which are not common to us. About 90% of the domestic market consists of taps made according to DIN371,374,376 TC312 clamping bits are not part of a thread cutter - they need to be purchased separately! < Function: The tap is clamped into a suitable TC312 collet which has a pre-set torque clutch or can be fine-tuned as needed.
In stock73,94 € with VAT -
Threading machine M3-M12, ISO 40 with length compensation for TC-312 with torque coupling,
M3 - M12 Clamping shank: Straight ISO40 < br> Standard: DIN69871 Clamping kit sets: DIN 371 (reinforced shank): M3; M4; M4.5; M5; M6; M7; M8; M10 DIN 376 (classical shank): M4,5; M5; M6; M8; M12 Length compensation - see photo no.3, no.4 and no.12 The set is delivered in the trunk - see photo 9 and no.10 Taper clamping method: The taps are secured in the extension behind the square and the shank. The screwdriver holds firmly in the extension, pulling the clamping collar in the front of the extension. Extensions are secured in the head via a bearing and stones - see photo no.5 and no.6 Expansion of the attachment see photo no.7 and no.8 You can buy the set Taps for M1 - M16 taps - see photo n ° 11 Taps for taps manufactured according to JIS and ISO 529 standards, which are not common in our country, are also available for tapping heads. About 90% of the domestic market consists of taps made to DIN standards Taps are not a part of the set! The tap is clamped into a suitable TC312 collet which has a pre-set torque clutch or can be fine-tuned as needed. Screwdriver has a length compensation of approx. 0.5cm, so it is sufficient to programmatically adjust the cutting depth. The torque clutch eventually prevents the tilting of the tap.
On request607,61 € with VAT