Pneumatic taps

Air tap with adjustable arm Range: according to the chosen variant * The range depends only on the VAT-SP tapping head, ie if you want a larger tapping range, you only need to buy a head with a different range - see related products. Min. compressor power: 5HP (corresponds to 3.8kW) Required pressure: 6-7 bar Air consumption: 940 l / min Arm positionability: Rmax 700mm Contains 6 pcs of TC type extensions - the size of the extensions is stated in the description for individual variants. The attachments have a torque coupling for taps manufactured according to DIN371 and DIN376. You can find the specific attachment sizes in the label for each variant Additional adapters can be purchased - see related products. Includes air pressure regulator with separator and lubricator. Cast iron clamping plate not included! The tapping head works at a pressure of 6-7 bar, the inlet air must be dry and clean. Regularly add suitable pneumatic oil to the lubricator container. Use suitable cutting oil when threading. After one hour of operation, allow the head to cool for 10-15 minutes. Clean and inspect the head at 3-month intervals. Before each thread cutting, check that the machined surface is parallel to the tapping arm (correct threading in the axis). If the tapping machine is not in stock, the delivery date can be immediately - for the tapping machine it is enough to switch the tapping head for a type with a different range - we have VAT-SP tapping heads themselves in stock.

Air tap with adjustable arm Range: according to the chosen variant * The range depends only on the VAT-SP tapping head, ie if you want a larger tapping range, you only need to buy a head with a different range - see related products. Min. compressor power: 5HP (corresponds to 3.8kW) Required pressure: 6-7 bar Air consumption: 940 l / min Arm positionability: Rmin. 200mm, Rmax 1400mm Contains 6 pcs of TC type extensions - the size of the extensions is stated in the description for individual variants. The attachments have a torque coupling for taps manufactured according to DIN371 and DIN376. You can find the specific attachment sizes in the label for each variant Additional adapters can be purchased - see related products. Includes air pressure regulator with separator and lubricator. Cast iron clamping plate not included! The tapping head works at a pressure of 6-7 bar, the inlet air must be dry and clean. Regularly add suitable pneumatic oil to the lubricator container. Use suitable cutting oil when threading. After one hour of operation, allow the head to cool for 10-15 minutes. Clean and inspect the head at 3-month intervals. Before each thread cutting, check that the machined surface is parallel to the tapping arm (correct threading in the axis). If the tapping machine is not in stock, the delivery date can be immediately - for the tapping machine it is enough to switch the tapping head for a type with a different range - we have VAT-SP tapping heads themselves in stock.

Air tap with adjustable arm Range: according to the chosen variant * The range depends only on the VAT-SP tapping head, ie if you want a larger tapping range, you only need to buy a head with a different range - see related products. Min. compressor power: 5HP (corresponds to 3.8kW) Required pressure: 6-7 bar Air consumption: 940 l / min Arm positionability: Rmin. 500mm, Rmax 1600mm Contains 6 pcs of TC type extensions - the size of the extensions is stated in the description for individual variants. The attachments have a torque coupling for taps manufactured according to DIN371 and DIN376. You can find the specific attachment sizes in the label for each variant Additional adapters can be purchased - see related products. Includes air pressure regulator with separator and lubricator. Cast iron clamping plate not included! The tapping head works at a pressure of 6-7 bar, the inlet air must be dry and clean. Regularly add suitable pneumatic oil to the lubricator container. Use suitable cutting oil when threading. After one hour of operation, allow the head to cool for 10-15 minutes. Clean and inspect the head at 3-month intervals. Before each thread cutting, check that the machined surface is parallel to the tapping arm (correct threading in the axis). If the tapping machine is not in stock, the delivery date can be immediately - for the tapping machine it is enough to switch the tapping head for a type with a different range - we have VAT-SP tapping heads themselves in stock.

Air tap with adjustable arm Range: according to the chosen variant * The range depends only on the VAT-SP tapping head, ie if you want a larger tapping range, you only need to buy a head with a different range - see related products. Min. compressor power: 5HP (corresponds to 3.8kW) Required pressure: 6-7 bar Air consumption: 940 l / min Arm positionability: Rmin. 200mm, Rmax 1900mm Contains 6 pcs of TC type extensions - the size of the extensions is stated in the description for individual variants. The attachments have a torque coupling for taps manufactured according to DIN371 and DIN376. You can find the specific attachment sizes in the label for each variant Additional adapters can be purchased - see related products. Includes air pressure regulator with separator and lubricator. Cast iron clamping plate not included! The tapping head works at a pressure of 6-7 bar, the inlet air must be dry and clean. Regularly add suitable pneumatic oil to the lubricator container. Use suitable cutting oil when threading. After one hour of operation, allow the head to cool for 10-15 minutes. Clean and inspect the head at 3-month intervals. Before each thread cutting, check that the machined surface is parallel to the tapping arm (correct threading in the axis). If the tapping machine is not in stock, the delivery date can be immediately - for the tapping machine it is enough to switch the tapping head for a type with a different range - we have VAT-SP tapping heads themselves in stock.

Air tapping head / tap Range: according to the chosen variant Size of TC extensions: according to the selected variant Speed: see label for each variant Min. compressor power: 5HP (corresponds to 3.8kW) Required pressure: 6-7 bar Air consumption: 940 l / min The tapping head works at a pressure of 6-7 bar, the inlet air must be dry and clean. Regularly add suitable pneumatic oil to the lubricator container. Use suitable cutting oil when threading. After one hour of operation, allow the head to cool for 10-15 minutes. Clean and inspect the head at 3-month intervals. Before each thread cutting, check that the machined surface is parallel to the tapping arm (correct threading in the axis). The tap is without tap adapters, available for purchase - see related products

Adjustable swivel angle head For pneumatic taps: according to the selected variant Inclination: 90 °

Electric programmable tap with adjustable arm with touch screen Range: M3-M16 Arm positionability: 130-1000mm Stroke: 600mm Speed ??max: 312 rpm. / min. The head can be tilted in two axes: 0-90 ° Power: 600W Contains 9 pcs of TC-312 adapters with torque coupling for taps made according to DIN standard: Adapters for DIN371 taps: M3, M4, M5 + M6, M8, M10 Adapters for taps DIN376: M12, M14, M16 Other tap adapters made according to DIN371 / DIN376 can be purchased separately - see related products. Touch screen, programming option: thread size selection, pitch, thread depth, speed, torque coupling, multiple cutting with regular tap removal / chip pulling,, manual or automatic thread cutting mode, speed change programmatically or manually (two buttons) , user memory where the most used settings and many other functions can be stored. Extremely quiet operation. We can also offer this type of tap in a larger version (M6-M30 and M6-M36) - on request.

Electric programmable tap with adjustable arm and touch screen Range: M6-M30 Arm positionability: 130-1000mm Stroke: 600mm Speed ??max: 180 rpm. / min. The head can be tilted in two axes: 0-90 ° Power: 1200W Contains 11 pcs of TC-820 adapters with torque coupling for taps made according to DIN standard: Adapters for taps DIN371: M6, M8, M10 Adapters for taps DIN376: M12, M14, M16, M18, M20, M22 + M24, M27, M30 Other tap adapters made according to DIN371 / DIN376 can be purchased separately - see related products. Touch screen, programming option: thread size selection, pitch, thread depth, speed, torque coupling, multiple cutting with regular tap removal / chip pulling,, manual or automatic thread cutting mode, speed change programmatically or manually (two buttons) , user memory where the most used settings and many other functions can be stored. Extremely quiet operation. We can also offer this type of tap in a smaller (M3-M16) or larger (M6-M36) - on request.

Electric programmable thread cutter with adjustable arm and touch screen Range: M6-M36 Positionability of arms: 130-1000mm Lift: 600mm Revolutions max: 180 rpm. / min. The head can be tilted in two axes: 0-90° Power: 1200W Contains 11 adapters with torque coupling for taps made according to the DIN standard: Adapters for DIN371 taps: M6, M8, M10 Adapters for DIN376 taps: M12, M14, M16, M18, M20, M22+M24, M27, M30, M33, M36 Other adapters for taps made according to the DIN371 / DIN376 standard can be purchased separately - see related products. Touch display, programming option: selection of thread size, pitch, thread depth, revolutions, torque coupling, multiple cutting with regular tap removal / extraction of chips, manual or automatic thread cutting mode, change of revolutions programmatically or manually (two buttons) , user memory where the most used settings and many other functions can be saved. Extremely quiet operation. We can also offer this type of thread in a smaller (M3-M16 or M6-M30) design (M6-M36) - see alternative products