Taps and dies
-
Machine tap M - HSSE ISO2(6H) with chip breaker, FANAR
Machine tap with straight groove and chip breaker Fitting: ISO2 (6H) Material: HSSE (High speed steel + 5% Cobalt) Coating: uncoated Ground thread profile Standard: DIN 371, DIN374, DIN376 Usage: Structural and carbon steel, low-alloy steel, steel castings up to 800N / mm2 Brass with a long chip Free-cutting steel, structural and case-hardening steel Spherical and malleable cast iron Non-alloy and low-alloy copper alloys Aluminum alloys with Si content
from 8,77 € with VAT -
Machine tap M - HSSE TiN ISO2(6H) with chip breaker 800X, FANAR
Machine tap with straight groove and chip breaker 800X Fitting: ISO2 (6H) Material: HSSE (High speed steel + 5% Cobalt) Coating: TiN - Titanium Nitride Ground thread profile Standard: DIN 371, DIN374, DIN376 Usage: Steel Food stainless steel Cast iron Non-ferrous metals
from 10,74 € with VAT -
Machine tap M - HSSE TiN ISO3 (6G) with chip breaker 800X , FANAR
Machine tap with straight groove and chip breaker 800X Fitting: ISO3 (6G) - plus tolerance for threads, where surface treatment (galvanization, etc.) will be applied Material: HSSE (High speed steel + 5% Cobalt) Coating: TiN - Titanium Nitride Grounded thread profile Standard: DIN 371, DIN374, DIN376 Usage: Steel Food grade stainless steel Cast iron Non-ferrous metals
Price - On request -
Machine tap M - HSSE-PM TiAlSiN ISO2(6H) with chip breaker, FANAR
Machine tap with straight groove and chip breaker Fitting: ISO2 (6H) Material: HSSE-PM (High speed steel + 5% Cobalt, sintering production) Coating: TiAlSiN Ground thread profile Standard: DIN 371, DIN374, DIN376 Usage: 1.4: Alloy steels, cold drawn tool steel up to 1000N / mm2 1.5: Hardened and hardened steels up to 38 HRC up to 1200N / mm2 2.1: Ferritic and martensitic stainless steels up to 1000N / mm2 2.3: Refractory stainless steel up to 1100N / mm2 3.3: Ball and malleable cast iron up to 700N / mm2 3.4: Ball and malleable cast iron up to 1000N / mm2 1.3: Structural and carbon steel, low-alloy steel, steel castings up to 1100N / mm2 6.4: Bronze and aluminum up to 1200N / mm2 7.4: Aluminum alloys with a silicon content of> 10%, up to 400 N / mm2 8.2: Thermosets and hardened plastics
from 12,78 € with VAT -
Machine tap M - HSSE-PM 1400 TiAlSiN ISO2(6HX) with chip breaker, FANAR
Machine tap with straight groove and chip breaker, made of sintered steel Fitting: ISO2 (6HX) Material: HSSE-PM (High speed steel + 5% Cobalt, sintering production) Coating: TiAlSiN Ground thread profile Standard: DIN 371, DIN374, DIN376 Usage: 1.5: Hardened and hardened steels up to 38 HRC up to 1400N / mm2 1.6: Alloys of steel and hardened steel up to 44 HRC 3.1: Gray cast iron 3.3: Ball and malleable cast iron up to 700N / mm2 4.6: Brass (copper-zinc steels with short chips) 4.9: Copper alloys with short chips
from 17,36 € with VAT -
Machine tap M - HSSE-PM TS 1400 TiAlSiN ISO2(6HX) with chip breaker, FANAR
Machine tap with straight groove and chip breaker, made of sintered steel, type PM TS Fitting: ISO2 (6HX) Material: HSSE-PM (High speed steel + 5% Cobalt, sintering production) Coating: TiAlSiN Ground thread profile Standard: DIN 371, DIN374, DIN376 Usage: 1.5: Hardened and hardened steels up to 38 HRC up to 1400N / mm2 1.6: Alloys of steel and hardened steel up to 44 HRC 3.1: Gray cast iron 3.3: Ball and malleable cast iron up to 700N / mm2 4.6: Brass (copper-zinc steels with short chips) 4.9: Copper alloys with short chips
from 13,88 € with VAT -
Machine tap M - HSSE ISO2 C(6H), FANAR
Machine tap (high speed) M, straight slot Fitting: ISO2 / 6H - ground thread profile Standard: DIN 371 Thread lead: C, 2 turns - see attached photo Material: HSSE (High speed steel + 5% Cobalt) Ground thread profile Usage: Structural and carbon steel, low-alloy steel, steel castings up to 800N / mm2 Brass with a long chip Free-cutting steel, structural and case-hardening steel Spherical and malleable cast iron Non-alloy and low-alloy copper alloys Aluminum alloys with Si content
from 7,93 € with VAT -
Machine tap G - HSSE GG TiCN DIN5156C , Fanar
Machine tap with straight groove, type GG Material: HSSE (High speed steel + 5% Cobalt) Coating: TiCN Ground thread profile Standard: DIN 5156 Application - cast iron 3.1: Gray cast iron up to 400N / mm2 3.2: Ball cast iron up to 550N / mm2 3.3: Malleable cast iron up to 500N / mm2 3.4: Malleable cast iron up to 800N / mm2 3.5: Ductile iron up to 700N / mm2 3.6: Ductile iron up to 1400N / mm2
from 40,75 € with VAT -
Machine tap M - HSSE GG TiCN ISO2 (6HX), FANAR
Machine tap with straight groove, type GG Fitting: ISO2 (6HX) Material: HSSE (High speed steel + 5% Cobalt) Coating: TiCN Ground thread profile Standard: DIN 371, DIN374, DIN376 Application - cast iron 3.1: Gray cast iron up to 400N / mm2 3.2: Ball cast iron up to 550N / mm2 3.3: Malleable cast iron up to 500N / mm2 3.4: Malleable cast iron up to 800N / mm2 3.5: Ductile iron up to 700N / mm2 3.6: Ductile iron up to 1400N / mm2
from 10,24 € with VAT -
Machine tap M - HSSE-PM 1400 TiAlSiN ISO2(6HX), FANAR
Machine tap with straight groove, made of sintered steel Fitting: ISO2 (6HX) Material: HSSE-PM (High speed steel + 5% Cobalt, sintering production) Coating: TiAlSiN Ground thread profile Standard: DIN 371, DIN374, DIN376 Usage: 1.5: Hardened and hardened steels up to 38 HRC up to 1400N / mm2 1.6: Alloys of steel and hardened steel up to 44 HRC 3.1: Gray cast iron 3.3: Ball and malleable cast iron up to 700N / mm2 4.6: Brass (copper-zinc steels with short chips) 4.9: Copper alloys with short chips
from 11,87 € with VAT -
Machine tap M - HSSE-PM 1400-HT TiAlSiN ISO2 (6HX), FANAR
Machine tap with straight groove, made of sintered steel, type PM TS 1400 HT TC Fitting: ISO2 (6HX) Material: HSSE-PM (High speed steel + 5% Cobalt, sintering production) Coating: TiAlSiN Ground thread profile Standard: DIN 371, DIN374, DIN376 Usage: 1.5: Hardened and hardened steels up to 38 HRC up to 1400N / mm2 1.6: Alloys of steel and hardened steel up to 44 HRC 3.1: Gray cast iron 3.3: Ball and malleable cast iron up to 700N / mm2 4.6: Brass (copper-zinc steels with short chips) 4.9: Copper alloys with short chips
from 12,71 € with VAT