Machine tap M - HSSE-PM 1400-HT TiAlSiN ISO2 (6HX), FANAR
| M3 DIN371 |
In stock
(10x)
|
12,35 € with VAT |
| M4 DIN371 |
In stock
(8x)
|
12,58 € with VAT |
| M5 DIN371 |
In stock
(9x)
|
13,50 € with VAT |
| M6 DIN371 |
In stock
(3x)
|
14,04 € with VAT |
| M8 DIN371 |
In stock
(3x)
|
16,81 € with VAT |
| M8x1,0 DIN371 |
On request
|
20,68 € with VAT |
| M10 DIN371 |
In stock
(3x)
|
22,17 € with VAT |
| M10x1,0 DIN371 |
On request
|
25,47 € with VAT |
| M10x1,25 DIN371 |
On request
|
28,07 € with VAT |
| M8 DIN376 |
On request
|
19,90 € with VAT |
| M10 DIN376 |
On request
|
25,71 € with VAT |
| M10x1,0 DIN374 |
On request
|
25,01 € with VAT |
| M12 DIN376 |
On request
|
33,14 € with VAT |
| M12x1,0 DIN374 |
On request
|
32,23 € with VAT |
| M12x1,25 DIN374 |
On request
|
40,92 € with VAT |
| M12x1,5 DIN374 |
On request
|
36,46 € with VAT |
| M14 DIN376 |
On request
|
43,81 € with VAT |
| M14x1,5 DIN374 |
On request
|
50,97 € with VAT |
| M16 DIN376 |
On request
|
45,25 € with VAT |
| M16x1,0 DIN374 |
On request
|
52,41 € with VAT |
| M16x1,5 DIN374 |
On request
|
50,74 € with VAT |
| M18 DIN376 |
On request
|
61,42 € with VAT |
| M18x1,5 DIN374 |
On request
|
54,06 € with VAT |
| M18x2,0 DIN374 |
On request
|
67,23 € with VAT |
| M20 DIN376 |
In stock
(2x)
|
70,42 € with VAT |
| M20x1,5 DIN374 |
On request
|
72,22 € with VAT |
| M24 DIN376 |
On request
|
122,60 € with VAT |
| M30 DIN376 |
On request
|
150,48 € with VAT |
Interested in this product?
Can't find any information? Or not sure about the choice? Ask Us
- Brand:
- FANAR
- Warranty:
- 24 months
Product information
Fitting: ISO2 (6HX)
Material: HSSE-PM (High speed steel + 5% Cobalt, sintering production) Coating: TiAlSiN
Ground thread profile
Standard: DIN 371, DIN374, DIN376
Usage:
1.5: Hardened and hardened steels up to 38 HRC up to 1400N / mm2
1.6: Alloys of steel and hardened steel up to 44 HRC
3.1: Gray cast iron
3.3: Ball and malleable cast iron up to 700N / mm2
4.6: Brass (copper-zinc steels with short chips)
4.9: Copper alloys with short chips
Variants
Accessories
-
Cutting paste MCC Molyslip 100g
Highly effective molybdenum paste for a denser grease consistency, suitable for drilling, thread cutting, extruding, stretching, pressing, extruding and bending. Particularly effective in machining problematic metals and alloys such as titanium and stainless steel. This is a MoS2 molybdenum paste enriched with sulfur and phosphorus compounds. The paste can be applied with a spatula or similar tool, smaller tools can be directly dipped into the paste. The paste has a low melting point, suitable for machining all kinds of metals including the most demanding metals and alloys such as titanium and nimon. The paste has excellent rinsing resistance - it can also be used under extreme pressures. Improves machining power and better surfaces can be used with it. Reduced friction prolongs tool life and allows faster material removal. Packaging 100g
In stock4,96 € with VAT -
Cutting paste MCC Molyslip 400g
Highly effective molybdenum paste for a denser grease consistency, suitable for drilling, thread cutting, extruding, stretching, pressing, extruding and bending. Particularly effective in machining problematic metals and alloys such as titanium and stainless steel. This is a MoS2 molybdenum paste enriched with sulfur and phosphorus compounds. The paste can be applied with a spatula or similar tool, smaller tools can be directly dipped into the paste. The paste has a low melting point, suitable for machining all kinds of metals including the most demanding metals and alloys such as titanium and nimon. The paste has excellent rinsing resistance - it can also be used under extreme pressures. Improves machining power and better surfaces can be used with it. Reduced friction prolongs tool life and allows faster material removal. Packaging 400g
On request15,33 € with VAT
Alternatives
-
Machine tap M - HSSE-PM 1400 TiAlSiN ISO2(6HX), FANAR
Machine tap with straight groove, made of sintered steel Fitting: ISO2 (6HX) Material: HSSE-PM (High speed steel + 5% Cobalt, sintering production) Coating: TiAlSiN Ground thread profile Standard: DIN 371, DIN374, DIN376 Usage: 1.5: Hardened and hardened steels up to 38 HRC up to 1400N / mm2 1.6: Alloys of steel and hardened steel up to 44 HRC 3.1: Gray cast iron 3.3: Ball and malleable cast iron up to 700N / mm2 4.6: Brass (copper-zinc steels with short chips) 4.9: Copper alloys with short chips
from 11,92 € with VAT
Do you need advice?
Jakub Novák, Orders
How do customers see us?
Free shipping
There is possibility of free shipping. For more information click here.
Fast shipping
If on stock, you will recieve your order in 1 working day.
Store
Most of the goods are available at the shop.
Individual discounts
Are you a loyal customer or do you want to become one? Contact us!