Drill chucks

Morse taper collet holder with driver for drill/lathe Morse cone: according to the selected variant For ER type collets: according to the selected variant Performance of the ER matrix: according to the selected variant Other dimensions - see product description for individual variants Usage : The collet clamp has an overseas cone driving nut that fits the spindles of Czech machines. I.e. these clamps are suitable for Czech spindles that drive tools through this nut + drive. These clamps are suitable for all types - Czech, Chinese and other - spindles with a morse taper. This is a direct replacement for ČSN 241491, ER collets and torque wrench need to be purchased (see related products) Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture.

Clamp - holder for Karnasch core drills, screw type Morse taper: according to the selected variant For clamping shanks: according to the selected variant The drill is clamped in the head over screws. Without internal cooling

Clamp - holder for Karnasch core drills, screw type with internal cooling Morse cone: according to the selected variant For clamping shanks: according to the selected variant Length of the clamping device: according to the selected variant The drill is clamped in the head via screws. With internal cooling

Quick-release chuck - holder for Karnasch core drills, quick-change design Morse taper: according to the selected variant Just click the drill into the chuck. For clamping shanks: 3/4 "(resp. 19.05mm) Without internal cooling

Quick-release chuck - holder for Karnasch core drills, quick-change design with internal cooling Morse taper: according to the selected variant Just click the drill into the chuck. For clamping shanks: 3/4 "(resp. 19.05mm) With internal cooling

Clamping collet chuck with Morse taper shank Clamping cone: according to the selected variant Head size / clamping range: according to the selected variant Note: * Size 16mm has a clamping range: 3 - 10 mm * Size 28mm has a clamping range: 6 - 20 mm The key is not included in the package. Standard: ČSN 24 1491 Usage: Drill or lathe - for clamping drills and other tools with a cylindrical shank This is an old Czech design. We recommend switching to ER collets and ER collets.

Carrier spring for core drills Size: 13x135mm Suitable for use with drive heads: 20.1293, 20.1286, 20.1310 , 20.1844 -

Adapter for weldon 3/4 "- for clamping classic drill chucks Application: For core drills with 3/4"(19,05mm) weldon chucks Drill chucks can be found - see related products

Thanks to this reduction, you can clamp larger drill diameters on a magnetic drill with weldon clamping 19mm(3/4 ") - with 32mm clamping 281 1/4") The reduction has a 7.98mm bore

Extension for drilling with core drills in greater depth Use: For core drills with 3/4" (19.05mm) weldon clamping ( or Nitto clamping) Drill chucks can be found - see related products

Adapter Weldon. Outer dimension 32mm, inner dimension 19mm

Overall Length: 170mm Pin Diameter: 7,5mm For Collet Clamp - Small Yoke: 44mm 220731/22 0731