Drill chucks

Hook wrench with tooth for quick-release chuck The chuck for which the key is intended can be found in the related products. The key may not fit chucks from other suppliers/manufacturers.

Tap chuck with hexagonal shank with groove for locking in bit holder Range: M3-M8 Clamping shank: classic hexagon 6.3mm Thanks to the groove it is possible to use the chuck on the shank and in the bit adapter with locking.

Tap chuck for battery drill etc. Range: M3-M8 Clamping shank: dia. 6.7mm with three driving surfaces Clamping surfaces prevent the chuck from rotating in the drill.

Hex Shank Tap Chuck with Groove for Locking in Bit Holder Range: M5-M12 Clamping shank: classic hexagon 6.3mm Thanks to the groove on the shank, the chuck can also be used in the bit adapter with locking.

Tap chuck for cordless drill etc. Range: M5-M12 Clamping shank: dia. 8.8 mm with three driving surfaces Clamping surfaces prevent the chuck from rotating in the drill.

90 ° Angle Attachment with Handwheel Chuck with 0.8-10mm Handle (UNF 3/8 "x 24 Thread) Chuck Diameter: 40mm chucks on the rear wall of the angular gear: 100mm Overall height from the hexagon to the wall of the angular gear: 125mm Hexagon: 8mm Use: Attach the clamp to the chuck through the shaft Suitable for mounting furniture, etc. PROFI quality - also suitable for company operations!

Clamp reduction - ISO50 x B 18 insert ISO 50, M24 thread DIN 2080

Corner attachment for bits with extension - flexible bowden, with hexagonal shank for AKU drill, hobby quality Practical aid for assembly in hard-to-reach areas The attachment is clamped using a hexagonal shank in the drill 360° rotatable For bits 1/4" (6mm) Bit holder is magnetic Bowden length 245mm, total length 290mm

Flexible shaft with drill chuck 1-10mm with handle Drive: hexagon 1/4" (6.35mm) Diameter of chuck body: 33mm Maximum diameter at handle : 37mm Shaft length : 1100mm Max speed : 8000 rpm

Adapter for clamping chuck in hammer drill or hammer hammer with SDS clamp Pin Thread: 1/2 "x20 UNF Clamping Procedure: Remove the screw from the mandrel with the cross head -

Corner bit for hexagon drill bit Practical tool for mounting in poorly accessible areas 1/4 " securing Total length 143mm Maximum speed 200 rpm Maximum torque 57Nm 90 ° angle

Bit for Bit, Hexagonal Shank 1/4 "(6mm) Bit holder is magnetic Overall length 130mm