DNMG

DNMG 150608 TF IC8250 Radi 0.8mm Coating: CVD, TiCN Al2O3 TiCN TiN IC8250 Series: Hard cobalt substrate with MTCVD TiCN and Al2O3 CVD coating. Suitable for conventional steel machining - roughing up to finishing - wide range of engagement conditions. High hardness and abrasion resistance. Application: Steel: P10-P35 Stainless Steel: M05-M20 TF Type: Universal use in conventional cutting conditions. Kat. No .: 5508111

DNMG 110408 MT TT7005 TT7005: Usage: Cast iron: K01-K15 Terms and Conditions - see attached photo Kat. No .: 5523585

Lathe insert VBD DNMG 150404 TF IC807 Radius 0.4mm Insert height: 4.76mm Coating: PVD, TiAlN IC807 series: Solid sub-micron substrate. Suitable for low to medium cutting speeds. Developed for machining heat-resistant steels, austenitic stainless steels and very hard steels. Use - universal: Steel: P10-P30 Stainless steel: M05-M20 Cast iron: K10-K30 Superalloys: S05-S20 Carbide: H05-H15 Cutting conditions - see attached photo Type TF: Universal use in normal cutting conditions. Suitable for carbon and alloy steels and refractory alloys Cat. no.: 5550322 The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

DNMG 150604 NF IC8250 Radius 0,4mm Coating: CVD, TiCN Al2O3 TiCN TiN IC8250 Series: Hard cobalt substrate with MTCVD TiCN and Al2O3 CVD coating. Suitable for conventional steel machining - roughing up to finishing - wide range of engagement conditions. High hardness and abrasion resistance. Usage: Steel: P10-P35 Stainless Steel: M05-M20 Types of NF: Suitable for common and finishing operation. Kat. No. 5550328

DNMG 150608 - M3P IC8250 Radius 0,8mm Coating: CVD, TiCN Al2O3 TiCN TiN IC8250 Series: Hard substrate with cobalt admixture with MTCVD TiCN and Al2O3 CVD coating. Suitable for conventional steel machining - roughing up to finishing - wide range of engagement conditions. High hardness and abrasion resistance. Usage: Steel: P10-P35 Stainless Steel: M05-M20 M3P: for steel machining, good chip removal, small cutting forces, smooth clean surface. Kat. No. 5567488

DNMG 150612 - M3P IC8250 IC8250 Series: Hard substrate with cobalt admixture with MTCVD TiCN and Al2O3 CVD coating. Suitable for conventional steel machining - roughing up to finishing - wide range of engagement conditions. High hardness and abrasion resistance. Usage: Steel: P10-P35 Stainless Steel: M05-M20 M3P: for steel machining, good chip removal, small cutting forces, smooth clean surface. Kat. No .: 5567489

Blade DNMG 150408 GN IC830 IC830 Series: < Suitable for intermittent cut and roughing of stainless steel, classical steels and heat-resistant alloys. High stiffness and wear resistance. Usage: Steel: P20-P40 Stainless Steel: M25-M35 Superslitz: S15-S30 Terms and conditions - see attached photo Type GN: Universal for normal cutting conditions. Kat. No .: 5568614

DNMG 110404 NF IC907 IC907 Series: < Hard Sub-Micron Substrate with TiAlN PVD Coating. Suitable for low to medium cutting speeds. Developed for machining refractory alloys, titanium, austenitic stainless steels and very hard steels. Application - Universal: Steel: P10-P30 Stainless: M05-M20 Cast iron: K15-K30 Non-ferrous metals and plastics: N05-N20 (not recommended, type is CCGT -AS IC20) Supersites: S05-S20 Hardened: H05-H15 Typ NF: Suitable for common and finishing operations . Kat. No. 5594179

DNMG 110404 VL IC908 IC908 Series: Hard sub-micron substrate with TiAlN PVD coating. Suitable for low to medium cutting speeds. Developed for machining refractory alloys, austenitic stainless steels and very hard steels. High resistance to embossing, oxidation. Suitable for a wide variety of materials and engaging conditions. Usage: Steel: P10-P30 Stainless Steel: M05-M20 Cast Iron: K15-K30 Superslitz: S05-S20 Hardness: H05-H15 Typical conditions - see enclosed photo Typ VL: Special die-cutter for machining refractory alloys and stainless steel valves. Ref. No .: 5594572

Turning insert VBD DNMG 150604 - AL H01 Radius: 0,4mm Insert height: 6,6mm Coating: uncoated, polished surface H01 Series: Suitable for routine and finishing operations - for non-ferrous metals and plastics. Application: Non-ferrous metals and plastics: N05-N25 Cutting conditions: Vc = 100-200m / min fn = 0.03-0.50 mm / rev. ap = 0,1-5,0 mm Type AL: Very sharp breaker for machining aluminum, plastics. Excellent for machining soft non-ferrous metals and their alloys. The price is for 1 piece, not for the whole package, if you want to buy the whole package, add 10 pieces to the cart.

Lathe insert VBD DNMG 150404 - PM 4315 Radius 0,4mm Insert height: 4,76mm Coating : CVD TICN AL2O3 TIN Series 4315: Application: Steel: P05-P15 Cast iron: K05-K15 General conditions - see attached photo Type PM: Universal breaker suitable for machining common steels(P). Contact the Company: Kat. Ä. : 26612919 The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Universal double-sided lathe insert, replaceable insert, insert DNMG 150604 EM 6630 Radius: 0,8mm Insert height ka: 6,35mm Sheet material: 6630 Application: Medium - common Steel: P15 -P35 Stainless steel: M10-M30 Cast iron: K20-K30 Superalloys: S15-S25 Ord. Ä. : 80004115 The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.