DCMT

Turning insert, replaceable insert for turning DCMT 11T304E-RF; T9325 Radius: 0.4mm Up. hole - diameter: 4,4mm Blade material: T9325 Application: Steel: P15-P35 Stainless steel: M10- M30 Cast iron: K15-K35 Ord. No.: 80033499 The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Turning insert, replaceable insert for turning DCMT 070202 - HMP, PC9030 Radius 0,2mm Sheet material: PC9030 - universal grade - usable from roughing to finishing. Ideal for machining stainless steel. High resistance to chipping under constant working conditions. Coating: PVD, TiAlN(Titan Aluminum Nitride) Application: Stainless steel: M25-M35 LamaÄ HMP: Medium to finishing breaker geometry for small chips. The wider wall of the breaker prolongs the life of the insert - even with a sudden change in the depth of the cut. The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Lathe insert, replaceable turning insert DCMT 070202 - MP , NC3225 Radius 0.2mm Coating : CVD , MT-TiCN Al2O3 TiN < Blade material: NC3225 - universal series suitable for machining automotive castings and bearing steel, for continuous and interrupted cuts. High chipping resistance, high temperature stability thanks to Al2O3 coating. Coating : MT-CVD : TiCN Al2O3 TiCN Usage : Steel : P20-P25 Type MP : Ideal choice for steels that have a hardened surface (, e.g. automotive and machine parts). Suitable for machining cast steel, bearing steel, etc. The breaker is very sharp with very good chip removal - even when machining rough/uneven surfaces. It makes a very good surface. The price shown is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket. Cat. no.: 102057566

Turning insert, turning insert for turning DCMT 070204 - HMP, NC3120 Radius 0,4mm Material of blade: NC3120 HMP type: Medium to finishing geometry of the chipper for small chips. The wider wall of the trowel ensures extended plate life - even with sudden change in cutting depth.

Turning insert, replaceable insert for turning DCMT 070204 - HMP, PC9030 Radius 0,4mm Sheet material: PC9030 - universal grade - usable from roughing to finishing. Ideal for machining stainless steel. High resistance to chipping under constant working conditions. Coating: PVD, TiAlN(Titan Aluminum Nitride) Application: Stainless steel: M25-M35 LamaÄ HMP: Medium to finishing breaker geometry for small chips. The wider wall of the breaker prolongs the life of the insert - even with a sudden change in the depth of the cut. The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Turning insert, replaceable insert for turning DCMT 11T304 - C25, NC3120 Radius 0,4mm Slab material: NC3120 - suitable for common machining to roughing of steel. High resistance to chipping, high temperature stability due to Al2O3 coating. Coating: MT-CVD: TiCN Al2O3 TiCN Application: Steel: P20-P25 LamaÄ C25: Suitable for Intermittent cut, for common machining of cast iron, stainless steel and refractory alloys. Low cutting forces, very good resulting surface. The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Turning insert, replaceable insert for turning DCMT 11T304 - C25, NC5330 Radius 0,4mm Sheet material: NC5330 - universal grade for heavy machinable materials, very rigid substrate resistant to chipping, ideal for machining stainless steel , hard steels, cast iron and heat-resistant steels. Coating: CVD, MT-TiCN Al2O3 TiN Application: Steel: P30-P35 Stainless steel: M25-M35 Cast iron : K15-K25 Heat-resistant steel: S15-S25 Laminator C25: Suitable for intermittent cutting, for common machining of cast iron, stainless steel steels and refractory alloys. Low cutting forces, very good resulting surface. The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Turning insert, replaceable insert for turning DCMT 11T304 - C25, PC5300 Radius 0,4mm Sheet material: PC5300 - Universal range for machining steel, cast iron, heavy-duty machinable materials and stainless steel. High resistance to breakage and build-up for stable machining. Ideal for intermittent cutting. Coating: MT-PVD, TiCN(Titanium Carbon Nitride), TiN(Titanium Nitride), Al2O3 Application: Steel: P30- P40(hard steel) Stainless steel: M20-M30 Cast iron: K20-K30 Refractory alloys: S15-S25 Lamber C25: Suitable for breakage Cutting, for common machining of cast iron, stainless steel and refractory alloys. Low cutting forces, very good resulting surface. The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Replacement insert in original packaging, DCMT 11T304 Radius 0,4mm Coating: MT-CVD: TiCN Al2O3 TiCN Series NC3120: < / b> High resistance to chipping, resistant to high temperatures. Application: Steel: P15-P30 HMP Type: Medium to finishing geometry of small chips. The wider wall of the trowel ensures extended plate life - even with sudden change in cutting depth.

Turning insert, replaceable insert for turning DCMT 11T304 - HMP, NC5330 Radius 0,4mm Sheet material: NC5330 - universal grade for heavy machinable materials, very rigid substrate resistant to chipping, ideal for machining stainless steel , hard steels, cast iron and heat-resistant steels. Coating: CVD, MT-TiCN Al2O3 TiN Application: Steel: P30-P35 Stainless steel: M25-M35 Cast iron : K15-K25 Heat-resistant steel: S15-S25 Breaker HMP: Medium to finishing breaker geometry for small pieces. The wider wall of the breaker prolongs the life of the insert - even with a sudden change in the depth of the cut. The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Turning insert, replaceable insert for turning DCMT 11T304 - HMP, PC9030 Radius 0,4mm Sheet material: PC9030 - universal grade - usable from roughing to finishing. Ideal for machining stainless steel. High resistance to chipping under constant working conditions. Coating: PVD, TiAlN(Titanium Aluminum Nitride) Application: Stainless steel: M25-M35 LMAA „HMP : StA… Medium to finishing breaker geometry for small chips. The wider wall of the breaker prolongs the life of the insert - even with a sudden change in the depth of the cut. The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Turning insert, replaceable insert for turning DCMT 11T308 - C25, NC3120 Radius 0,8mm Sheet material: NC3120 - suitable for common machining to roughing steel. High resistance to chipping, high temperature stability due to Al2O3 coating. Coating: MT-CVD: TiCN Al2O3 TiCN Application: Steel: P20-P25 LamaÄ C25: Suitable for Intermittent cut, for common machining of cast iron, stainless steel and refractory alloys. Low cutting forces, very good resulting surface. The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.