Construction reamers
-
Manual adjustable reamer - substitute of CSN 221424 , YATO
Adjustable reamer - manual - without guide bush Range: according to the chosen variant Standard: without standard, replacement for ČSN 221424 Manual adjustable reamers are ONLY suitable for through holes. The cutting edges ream gradually (conical hole), ie the set diameter will not be reamed until the reamer passes the cutting edges through the hole. Adjustable reamers are used in finishing machining operations with cylindrical holes. Reamed holes have a precise size, geometric shape and a smooth surface. The size of the reamer is continuously variable within the specified range. The set size is measured via a pair of opposing knives. The commonly supplied knife geometry is suitable for machining gray cast iron and bronze.
from 16,01 € with VAT -
Adjustable reamer 10.32 - 11.11 mm, ČSN 221424
Clearance saleAdjustable reamer without guide sleeve, 221424 Adjustable reamer without guide Range 10,32-11,11 mm Manual reamer revolvers are suitable ONLY for through holes. The edges are reamed gradually, ie the set diameter will be reamed when the reamer passes through the blades. Adjustable reamers are used when finishing machining operations of the cylindrical holes. Recessed holes have a precise dimension, geometric shape and smooth surface. The size of the reamer is continuously variable in the range indicated. The measured dimension is measured over a pair of opposing knives. The commonly supplied geometry of knives is suitable for machining gray cast iron and bronze.
On request21,55 € with VAT -
Adjustable reamer 12.5 - 14.0 mm, ČSN 221424
Clearance saleAdjustable reamer without guide sleeve, 221424 Adjustable reamer without guide Range 12,5-14 mm Revolving hand reamers are suitable ONLY for through holes. The edges are reamed gradually, ie the set diameter will be reamed when the reamer passes through the blades. Adjustable reamers are used when finishing machining operations of the cylindrical holes. Recessed holes have a precise dimension, geometric shape and smooth surface. The size of the reamer is continuously variable in the range indicated. The measured dimension is measured over a pair of opposing knives. The commonly supplied geometry of knives is suitable for machining gray cast iron and bronze.
In stock82,66 € with VAT