Plugged

Machine insert reamer for holes ( holes ) Dimensions and tolerance: according to the selected variant Other dimensions - see the attached catalog sheet Material: HSS The teeth are in a left helix 7° Clamping hole with taper 1:30 Standard: ČSN 221432 / CSN 22 1432 / DIN 219 B / ISO 2402 For clamping, holders are used: ČSN 241210 / DIN 217 Use: Machine reaming of holes in ferrous and non-ferrous metals, their alloys and plastic materials. The reamers are Czech-made, unused, from over-standard stock. Only a limited selection. If you did not find the reamer you were looking for, write or call and we will check.

Machine plug-in reamer for holes (holes) Size and tolerance: according to the chosen variant Other dimensions - see enclosed catalog sheet Material: HSS The teeth are in the left helix 7 ° Clamping hole with 1:30 taper Standard: ČSN 221432 / CSN 22 1432 / DIN 219 B / ISO 2402 Holders for clamping: ČSN 241210 / DIN 217 Usage: Machine reaming of holes in ferrous and non-ferrous metals, their alloys and plastics. If you haven't found the reamer you're looking for, type or call, we'll check.

Machine plug-in reamer for holes (holes) with straight cutting edges Size and tolerance: according to the chosen variant Other dimensions - see enclosed catalog sheet Material: HSS Clamping hole with 1:30 taper Blades with uneven spacing Standard: ČSN 221447 / CSN 22 1447 / DIN219A / DIN 219 A / ISO 2402 Holders for clamping: ČSN 241210 / DIN 217 Usage: Machine reaming of holes in ferrous and non-ferrous metals, their alloys and plastics. Not suitable for reaming holes with longitudinal grooves! Reamers are Czech-made, unused, come from excess stock. Only a limited selection. If you haven't found the reamer you're looking for, type or call, we'll check.

Machine plug-in reamer for holes (holes) with screwed teeth (teeth according to ČSN 221435.1) Size and tolerance: according to the chosen variant Clamping hole with 1:30 taper Teeth with uneven spacing Material: HSS The body of the reamer is made of structural steel. Standard: ČSN 221435 / CSN 22 1435 / DIN 220 / ISO 2402 Holders for clamping: ČSN 241210 / DIN 217 Usage: Machine reaming of holes in ferrous and non-ferrous metals, their alloys and plastics. Reamers are Czech-made, unused, come from excess stock. Only a limited selection.

Holder for socket drill ČSN221414 or reamers ČSN221432, ČSN221435, ČSN221447 Clamping diameter for reamer / drill: according to selected variant Morse taper: according to the selected variant Material: Structural steel - cemented, hardened Standard: ČSN241210 / 24 1210 / DIN217 / DIN 217 / ISO 2402 The holder includes a carrier ČSN241210.10 Usage info: Scanning of countersinks and reamers is performed by a nut located behind the carrier.

Holder for socket drill ČSN221414 or reamers ČSN221432, ČSN221435, ČSN221447 Clamping diameter for reamer / drill: according to selected variant Morse taper: according to the selected variant Material: Structural steel - cemented, hardened Standard: ČSN241210 / 24 1210 / DIN217 / DIN 217 / ISO 2402 The holder includes a carrier ČSN241210.10 Usage info: Scanning of countersinks and reamers is performed by a nut located behind the carrier.

120H7 Clamping hole: 50mm Cutting length: 60mm Number of teeth: 6 < Clamping hole with taper 1:30 Teeth with non-uniform pitch Material: HSS - high-speed steel Reamer body made of structural steel. Usage: Machine reaming of holes in ferrous and non-ferrous metals, their alloys and plastics. Czech production, unused - supernormal supplies