Collets

Clamping collet for JAL collet clamping head / collet clamp - (smaller) jalky ( fits into the clamping case with ČSN 221490 or 221491 or 221492 ) Inner diameter of the collet: according to the selected variant Outer diameter of collet: 16mm Standard: PN 241495 / 24 1495

Clamping collet for JAL collet clamping head / collet clamp - larger jaws (fits in clamping case with ČSN 221490 or 221491 or 221492) Inner diameter of the collet: according to the selected variant Outer diameter of collet: 28mm Standard: PN 241495 / 24 1495

Set of 9 pcs ER 25 collets for taps without internal cooling Set contains collets: 3,5x2,7 - for M3 DIN371 4,5x3,4 - for M4 DIN371 6.0x4.9 - for M5 and M6 DIN371 7.0x5.5 - for M7 DIN371 8.0x6.2 - for M8 DIN371 9.0x7.0 - for M12 DIN376 10,0x8,0 - for M10 DIN371 11,0x9,0 - for M14 DIN376 12,0x9,0 - for M16 DIN376 Collet clamping procedure: Snap the collet into the clamping nut - according to the attached picture. standards: DIN 6499 A / 430GC

Set of 11 pcs ER 32 collets for taps without internal cooling Set contains collets: 3,5x2,7 - for M3 DIN371 4,5x3,4 - for M4 DIN371 6.0x4.9 - for M5 and M6 DIN371 7.0x5.5 - for M7 DIN371 8.0x6.2 - for M8 DIN371 9.0x7.0 - for M12 DIN376 10,0x8,0 - for M10 DIN371 11,0x9,0 - for M14 DIN376 12,0x9,0 - for M16 DIN376 14,0x11,0 - for M18 DIN376 16, 0x12,0 - for M20 DIN376 Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture. standards: DIN 6499 A / 470GC

Set of 9 sealed ER 25 thread collets for use with internally cooled taps, ER25 collets The set includes collets : 3.5x2.7 / 4.5x3.4 / 6.0x4.9 / 7.0x5.5 / 8.0x6.2 / 9.0x7.0 / 10.0x8.0 / 11.0x9.0 / 12.0x9.0 mm , i.e. for clamping machine taps DIN371/374/376 in the range M3-M16 (with the exception of M3.5 / M7) Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture. Standard: DIN 6499 GEC / 430GEC Throwability: 0.015mm Max. pressure tested by the manufacturer: 40bar

Set of 12 sealed collets ER 25 for use with tools without internal cooling Diameters: 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14 mm Collet clamping procedure: Snap the collet into the clamping nut - according to the application © image. Standard: DIN 6499 C / 430EC Tools with internal cooling are not manufactured with a shank smaller than 3mm, therefore this set starts from 3mm diameter.

Set of 18 sealed collets ER 32 for use with tools without internal cooling Diameters: 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20 mm Collet clamping procedure: The collet clicks into place Insert into the clamping nut - according to the enclosed figure. Standard: DIN6499C / 470EA Tools with internal cooling with a shank smaller than 3mm are not manufactured, therefore this set starts from 3mm.

Varnished wooden binder for ER 16 collet 10 holes

Varnished wooden binder for ER 16 collet 12 holes

Colored wooden binder for ER 25 collet 16 holes

Varnished wooden binder for ER 32 collet 18 holes