Collet

Collet holder HSK A 63 ER 32 - 100 mm Type: HSK A63 ER32 AD - central cooling Length from cone to clamp: 100mm Max. collet size: 20mm For collets with outer diameter: 32mm Diameter of clamping nut: 50mm Design of the clamping shank for cars. replacement: DIN69893 A ER32 collets can be purchased additionally. Throwability: up to 0.005mm Balance: G2.5 / 20,000 rpm. Standard: DIN 69893 The collar has a hole for a data carrier according to DIN69873 (Balluffchip)

Collet holder HSK F 63 ER 32 - 70 mm Type: HSK F63 ER32 AD - central cooling Length from cone to clamp: 70mm Max. collet size: 20mm For collets with outer diameter: 32mm Diameter of clamping nut: 50mm Design of the clamping shank for cars. replacement: DIN69893 A ER32 collets can be purchased additionally. Throwability: up to 0.005mm Balance: G2.5 / 20,000 rpm. Standard: DIN 69893 - F The collar has a hole for a data carrier according to DIN69873 (Balluffchip)

Varnished wooden binder for ER 16 collet 10 holes

Varnished wooden binder for ER 16 collet 12 holes

Colored wooden binder for ER 25 collet 16 holes

Varnished wooden binder for ER 32 collet 18 holes

Varnished wooden binder / base for ER 40 collet 23 holes

Threaded nut for collet chuck ER 25 Outer diameter: 42mm Nut width: 20mm Inner diameter (threaded): 30,5mm Thread M32x1,5 < br> Opening: 21,4mm Matrix has internal bearing and gasket to prevent dust and dirt from entering the collet / clamps DIN6499 Collet clamping procedure: Click the clamping nut into the clamping nut - according to the attached picture.

Collet holder HSK F 63 ER 40 - 75 mm Type HSK F63 ER40 AD - cooling guided through the center Length from cone to holder: 75mm Max. collet size: 30mm For collets with outer diameter: 40mm Diameter of clamping nut: 62mm Clamping stem design for aut. replacement: DIN69893 F ER40 collets can be purchased additionally. Throwability: up to 0.005mm Balance: G6.3 / 20,000 rpm. Standard: DIN 69893 The collar has a hole for a data carrier according to DIN69873 (Balluffchip) Cat. no.: F63.02.26

Regofix collet chuck HSK-A 63 x ER32 - 100mm Type HSK A63 ER32 AD - center-cooled cooling Length from cone to chuck: 100mm Max. collet size: 20mm For collets with outer diameter: 32mm Clamping nut diameter: 49mm Clamping shank design for cars. exchange: DIN69893 A ER32 collets can be purchased separately. Throw: up to 0.005mm Balance: G6.3 / 20,000 rpm. Standard: DIN 69893 There is a hole in the collar for a data carrier according to DIN69873(Balluffchip)

Morse Clamp Clamp MK 2 x ER32 6 Clamps MK2xER32 (2xER32) Max. collet size: 20mm Clamping thread in cone is M10 Collets can be purchased separately. Contains collet: 5-6mm, 7-8mm, 9-10mm, 11-12mm, 15-16mm, 19-20mm Supplied in plastic case Hazigness: up to 0.005mm Collet clamping procedure: Click the clamping nut into the clamping nut - according to the attached picture. DIN 228A