Clamps for milling

Clamp Clamp with morse cone MK 3 x ER 32 MK3xER32 (3xER32) Max. Collar Size: 20mm Bolt Threaded Bolt / Bolt: M12 Bolt Nut Diameter: 49mm For Collet Outer Diameter: 32mm Thread: up to 0.005mm ER32 Collet Can be purchased. Collet clamping procedure: Clamp the clamp into the clamping nut - according to the attached picture. DIN 228A

Clamp Clamp with Morse Cone MK 3 x ER 32 6 Clamps MK3xER32 (3xER32) Clamping Thread in Cone M12 Max. Collet size: 20mm Collet can be purchased separately Set includes collet: 5-6mm, 7-8mm, 9-10mm, 11-12mm, 15-16mm, 19-20mm Supplied in plastic case < :

Clamp Clamp with Morse Cone MK 3 x ER 32 15 Clamps MK3xER32 (3xER32) Clamping Thread in Cone M12 Max. Collet size: 20mm Collet can be purchased separately Set includes collet: 2-3mm , 3-4mm , 4-5mm 5-6mm , 6-7mm , 7-8mm , 8-9mm , 9-10mm , 10-11mm , 11-12mm , 12-13mm , 13-14mm , 15-16mm , 17-18mm , 19-20mm Supplied in plastic case < :

Clamp Clamp with Morse Cone MK 3 x ER 40 8 Clamps MK3xER40 (3xER40, MK3 / ER40) Max. Collet Size: 30mm Set of Collet: 5-6mm , 7-8mm , 9-10mm , 11-12mm , 13-14mm , 15-16mm , 19-20mm , 24-25mm Supplied in plastic case < :

Clamp Clamp with MK Cone MK 4 x ER 25 6 Clamps MK4xER25 (4xER25) Clamping Thread in Cone M16 Max. collet size: 16mm Other collet dimensions can be purchased separately Contains collet: 3-4mm; 5-6mm; 7-8mm; 9-10mm; 11-12mm; 15-16mm Supplied in plastic case Fusing: up to 0.005mm Collet clamping procedure: Clamp the clamping nut into the clamping nut - according to the attached picture. DIN 228A

Morse clamp clamp MK 4 x ER 32 6 klaskin MK4xER32 (4xER32) Other clamps available separately Max. Collar Size: 20mm Kit Contains Collet: 5-6mm, 7-8mm, 9-10mm, 11-12mm, 15-16mm, 19-20mm Supplied in Plastic Case Running: up to 0.005mm < Collet clamping procedure: Clamp the clamping nut into the clamping nut - according to the attached picture. DIN 228A

Morse clamp clamp MK 4 x ER 32 15 klaskin MK4xER32 (4xER32) Other clamps available separately Max. Collar Size: 20mm Kit Contains Collet: 2-3mm , 3-4mm , 4-5mm 5-6mm , 6-7mm , 7-8mm , 8-9mm , 9-10mm , 10-11mm , 11-12mm , 12-13mm , 13-14mm , 15-16mm , 17-18mm , 19-20mm Supplied in Plastic Case Running: up to 0.005mm < Collet clamping procedure: Clamp the clamping nut into the clamping nut - according to the attached picture. DIN 228A

Morse Clamp Clamp MK 4 x ER 40 8-Clamp MK4xER40 (4xER40) Other Collet Clamps can be purchased separately Max. collet size: 30mm Set includes collet: 5-6mm , 7-8mm , 9-10mm , 11-12mm , 13-14mm , 15-16mm , 19-20mm , 24-25mm Supplied in plastic case < :

Milling spindle with taper shank for cylindrical milling cutter, Milling cutter pin MK3 thread with M12 internal thread Clamping diameter for milling cutters: 22mm Clamping length: 47mm < br> Screw: M10 with cross head ČSN 241413 Goods coming from abnormative stocks, unused

Long milling mandrel for clamping face milling cutters / circular cutters and saws. Clamping cone: SK ISO 30 Inner thread: M12 Diameter: 16mm Clamping part length: 250mm Total length: 366mm Nut A^14SN 241437: M14x1 , 5 The other end of the mandrel is mounted in the bearing of the extension arm. standards Standard: A „A’SN 241431 / CSN 24 1431 Goods of overstock, not used. Mandrels can have slight surface corrosion due to improper storage.

Milling arbor for clamping insert cylindrical milling cutters Milling method for milling cutter: stones and cross bolt Clamping cone: SK ISO 40 Female thread: M16 Cutter shaft diameter: 27mm Cutter shaft length: 18mm Screw: M12 with cross Standard head Standard: A „A’SN 241442/24 1442 Mandrels are used to clamp pre-driven tools.

Milling arbor for clamping insert milling cutters Milling method for milling cutter: stones and cross bolt Clamping cone: SK ISO 50 Female thread: M24 Cutter shaft diameter: 27mm Cutter shaft length: 18mm Screw: M12 with cross Standard head Standard: ÄOSN 241442/24 1442 Mandrels are used for clamping pre-driven tools.