Clamps for classic lathes
-
Swivel tips
-
Flange ER clamps
-
Quick release heads
-
Holders and collets 5C
-
Lathe mandrels
-
Lathe hands
-
Knife head keys
-
Fixed turning mandrel with driving surfaces, DIN
Clearance saleFixed turning mandrel with driving surfaces / conical clamping mandrel Nominal diameter d: according to the selected variant Other dimensions and dimensions - see product description for individual variants Kuželovist: 1: 2000 Standard: made according to DIN, resp. replacement for ČSN 243350, see drawing Turning mandrels are made of high quality steel, hardened and ground The thorns are conical The size of the mandrel is marked on the larger diameter side Mandrels are mainly used for machining smaller rotating objects that already have a machined hole The object to be machined slides on the smaller side of the mandrel and moves until it is caught on the conical surface of the mandrel To achieve greater accuracy, it is recommended to clamp the mandrel between the points. The rotation is then ensured by a heart carrier, which is attached to the side of the mandrel with a flat.
from 5,72 € with VAT -
Fixed turning mandrel with driving surfaces, CSN 243350 , Zbrojovka
Clearance saleFixed turning mandrel with driving surfaces / conical clamping mandrel Trn comes from above-standard stock, manufacturer Zbrojovka Vsetín, may not be in 100% condition, may be used. Nominal diameter d: according to the selected variant Other dimensions - see product description for individual variants / on request Conic: 1:2000 Lathe mandrels are made of high quality steel, hardened and ground Thorns are conical The size of the mandrel is marked on the side of the larger diameter Mandrels are mainly used when machining smaller rotary objects that already have a hole machined The workpiece slides onto the smaller side of the mandrel and moves until it catches on the conical face of the mandrel To achieve greater accuracy, it is recommended to clamp the mandrel between the tips. Rotation is then ensured by a heart driver, which is attached to the side of the mandrel equipped with a flat surface. Standard: ČSN 243350
from 2,42 € with VAT -
Handle for clamping table for milling machine with internal thread, plastic, type VAH
Handle / handle / handle / lever handle adjustable - for easy tightening / loosening Thread: according to the selected variant Other dimensions - see product description in the photo for individual variants Material: hardened plastic, metal blackened hexagon Usage : Suitable for securing clamping tables of milling machines and other tables
from 2,96 € with VAT -
Expansion turning mandrel with thrust nut CSN 243375
Clearance saleExpanding lathe with morse taper Nominal diameter d: according to the selected variant Other dimensions - see enclosed catalog sheet Standard: ČSN 2433575, design with push-off nut for easy punching of the mandrel from the spindle Excess stock, unused, dried petroleum jelly.
from 96,70 € with VAT -
Replacement insert fixed 4/2, ČSN 241333 - used
Used fixed sleeve fixed 4x2 for quick-release articulated head 241332-4(MK4) Used for quick clamping of tools with morse taper Outer diameter Case size: 46mm Inner cone: MK2 Overall length: 80mm Standard: ÄSN 24 1333 used, preserved, functional
In stock9,67 € with VAT -
Swivel tip MK1, VPC-MT1
Rotary Tip MK 1 60st. , 3 Bearings, Small Body / Tip Bush Angle of Tip: 60 ° Tip Diameter: 16mm Case Diameter (min): 27mm Case Diameter (Max): 32mm Housing Length tip: 31mm (of which 11mm is a cylindrical part) Overall length: 108mm Other dimensions see enclosed photo Max. Circular runout: 0.005 mm Max. load: 20kg Max. speed: 3200 rpm. * Rotation need to be reduced due to workpiece weight - see enclosed chart Material: Alloy steel, HRC 60 Note: : This stem rotates the stem, the body and the 60 ° point are monolith. Ref. No. 5001-001
On request42,82 € with VAT