Clamps for classic lathes

Replacement tip for Škoda MK3 swivel tip ČSN 243324 Diameter of the tip Dmax: 30mm Diameter of the ground cylindrical part: 25mm Diameter for the thrust bearing: 15mm Diameter for the rear bearing: 5mm Total length: 153mm Suitable for older Škoda tips with a black case. Not suitable for Silver-line ( type ČSN 243324M).

Replacement tip for Škoda MK4 swivel tip ČSN 243324 Diameter of the tip Dmax: 35mm Diameter of the ground cylindrical part: 30mm Diameter for the thrust bearing: 20mm Diameter for the rear bearing: 8mm Total length: 193mm Suitable for older Škoda tips with a black case. Not suitable for the Silver-line ( series, type ČSN 243324M).

Replacement tip for swivel tip A… code MK4 A „A’SN 243324

Spare part - tip for swivel tip MK5 ÄOSN 243324 Tip diameter Dmax: 45mm Shaft diameter for needle bearing: 40mm Diameter for axial bearing: 30mm Diameter for rear bearing: 12mm Overall length: 225mm

Replacement tip for Škoda MK6 swivel tip ČSN 243324 Diameter of the tip Dmax: 60mm Diameter of the ground cylindrical part: 55mm Diameter for the thrust bearing: 40mm Diameter for the rear bearing: 20mm Total length: 305mm Suitable for older Škoda tips with a black case. Not suitable for the Silver-line ( series type ČSN 243324M).

Spare part - tip for swivel tip MK6 A „A’SN 243324 Tip diameter Dmax: 60mm Shaft diameter for needle bearing: Diameter for thrust bearing: Diameter for rear bearing: Overall length:

Clamping sleeve for ER collet lathe a: 24mm < br> b: 40mm c: 55mm d: 80mm e: 3x thread M6 (3x120 °) on axis o. 65mm Set includes collet: 3-4-6-8-10-12-14-16-18-20 Handlery: up to 0.005mm Other collet can be purchased separately < / b> Collet clamping procedure: Click the clamping nut into the clamping nut - according to the attached picture. Passes directly on the lathe flange: - ASIST PLATINUM PRO AE4S50M MINI LATHE - Proma SM 300 E

Clamping sleeve for ER collet lathe a: 20mm b: 40mm c: 72mm d: 100mm e: 3x thread M8 (3x120 °) on the axis o. 84mm < Collet clamping procedure: Click the clamping nut into the clamping nut - as shown in the picture. Suitable for lathes - instead of a universal chuck

Clamping sleeve for ER collet lathe a: 24mm b: 40mm c: 72mm d: 100mm e: 3x thread M8 (3x120 °) on the axis o. 85mm Set includes collet: 3-4-6-8-10-12-14-16-18-20 Handle: up to 0,005mm Other collet can be purchased separately < / b> Collet clamping procedure: Click the clamping nut into the clamping nut - according to the attached picture. Suitable for lathes - instead of a universal chuck

Clamping sleeve for ER collet lathe a: 24mm < br> b: 40mm c: 95mm d: 125mm e: 3x thread M8 (3x120 °) on the axis o. 108mm Set includes collet: 3-4-6-8-10-12-14-16-18-20 Handle: up to 0.005mm Other bracelets can be purchased separately < / b> Collet clamping procedure: Click the clamping nut into the clamping nut - according to the attached picture. Suitable for lathes - instead of a universal chuck

Holder for 5C collet, 30 holes Holder without collet