Clamping tools
-
Clamps for milling
-
Drill chucks
-
Clamps for classic lathes
-
Clamps for NC lathes
-
Universal chucks and acc.
-
Drill chucks
-
Vices, dividers and tables
-
Reduction sleeves
-
Magnet. clamps, demagnetizers
-
Boring heads
-
Clamping accessories
-
Vise under drill with prism, type BMS
Robust vice for a drill or milling machine. Suitable replacement for vise ČSN 243160 Width of the jaws: according to the selected variant Other dimensions - see attached catalog sheet or product description for individual variants Precise guidance of the jaws, the jaws do not wobble! Tightening with a trapezoidal screw that goes inside the massive handle. The vise is suitable for use with a machine drill or a smaller milling machine. Vise color may vary with delivery (blue, white)
from 41,62 € with VAT -
Live center with enlarged head, type VLC, VERTEX
Centering rotary tip with enlarged head Clamping Morse cone: according to the selected variant Other dimensions - see the attached catalog sheet Tip angle: 60° - 90° - see attached catalog sheet Material: alloyed tool steel, HRC 50
from 94,19 € with VAT -
Manual vise type PS , CSN 243160 , Strojtex
Recommended ✓Workshop vise for drill, milling machine, longitudinal and transverse prism, soft machinable jaws Width of the jaws: according to the selected variant Other dimensions - see attached catalog sheet or product description for individual variants The jaws are made of high-quality steel, hardened to 45 HRC ± 5 Standard: ČSN 243160
from 266,62 € with VAT -
Quick-release machine vice, type VQS, VERTEX
Recommended ✓Mechanical vise with quickly adjustable jaw Width of the jaws: according to the selected variant Additional dimensions and parameters - see the attached catalog sheet or product description for individual variants Suitable under milling machine, sander, precision milling
from 224,81 € with VAT -
Manual vise, type MBV 2001, YORK
Workshop vise for drill, milling machine with solid aluminum handle Longitudinal and transverse prism, soft machinable jaws Width of the jaws: according to the selected variant Other dimensions - see the attached catalog sheet The jaws are made of high-quality steel, hardened to 45 HRC ± 5 Fixing screws
from 281,70 € with VAT -
Manual vise, type MBV 2002 with tooth clutch, YORK
Workshop vise for drill, milling machine with massive aluminum handle and toothed clutch Width of the jaws: according to the selected variant Other dimensions - see the attached catalog sheet Adjustable lever with toothed clutch = mechanical booster of clamping force Solid aluminum handle Longitudinal and transverse prism The jaws are made of high-quality steel, hardened to 45 HRC ± 5 Fixing screws It is possible to purchase soft machinable jaws for the vise
from 359,55 € with VAT -
Key for Vertex drill chuck
Handle for VERTEX drill chuck Dimensions: Pin diameter: according to the selected variant Number of teeth: see description of selected variant Min. collar diameter: see description of the selected variant Max. collar diameter: according to the selected variant Before ordering a loop, compare the parameters with your used handle or chuck. We do not guarantee compatibility with old Czech chucks and chucks of brands other than Vertex - each manufacturer uses different types of loops.
from 1,94 € with VAT -
Live center 60° - CSN 243324 , Skoda
Morse swivel tip Morse taper: according to the selected variant Other dimensions and parameters - see product description for individual variants Top angle: 60 ° Standard: ČSN 24 3324 The tip has two classic + one needle bearing. The tip can be lubricated from the back of the screw or directly into the bearing - via the housing - by loosening the screw. The tip can also be dismantled - two grooves are used for this - see photo.
from 98,26 € with VAT -
Live center 90° - CSN 243324 , Skoda
Morse swivel tip Morse taper: according to the selected variant Other dimensions and parameters - see product description for individual variants Top angle: 90 ° Standard: ČSN 24 3324 The tip has two classic + one needle bearing. The tip can be lubricated from the back of the screw or directly into the bearing - via the housing - by loosening the screw. The tip can also be dismantled - two grooves are used for this - see photo.
from 152,90 € with VAT -
Screw studs , HRC27
Screw double-sided thread - pin Size: according to the selected variant Total length: according to the selected variant Other dimensions - see the attached catalog sheet Strength screw, HRC 27° Suitable for machine use for clamps/bridges/nuts, not suitable for use in auto-moto
from 1,33 € with VAT -
Milling mandrel for milling head with transverse driving groove , DIN2080
Milling mandrel for clamping cylindrical socket cutters Clamping cone: according to the selected variant Diameter of the cylindrical part for the socket cutter: according to the selected variant Distance from the collar to the end of the clamping part: according to the selected variant Other dimensions - see product description for individual variants Method of clamping the cutter: stones and screw Standard: DIN 2080 / ČSN241440 - manual tool change If you are not sure that you have chosen the right clamp / you are not sure about the standard, you can find a comparison of this standard with other standards in the photos.
from 44,67 € with VAT -
Weldon holder for mills with a cylindrical shank with a flat surface , DIN2080
Weldon clamp for clamping a cutter with a cylindrical shank and a locking surface for a screw Clamping cone: according to the selected variant Clamping diameter for cutter: according to the selected variant Length of the clamping part: according to the selected variant Other dimensions - see product description for individual variants Usage: For machines with manual change Standard: DIN 1835-B, ČSN 247205.1, DIN 2080 - manual tool change If you are not sure that you have chosen the right clamp / you are not sure about the standard, you can find a comparison of this standard with other standards in the photos.
from 33,49 € with VAT