Clamping tools
-
Clamps for milling
-
Drill chucks
-
Clamps for classic lathes
-
Clamps for NC lathes
-
Universal chucks and acc.
-
Drill chucks
-
Vices, dividers and tables
-
Reduction sleeves
-
Magnet. clamps, demagnetizers
-
Boring heads
-
Clamping accessories
-
YORK Extra S 150mm vice with swivel bearing
Workshop vise with turntable and bearing It is suitable for heavy work / demanding use The vise has an exact prismatic Guide and jaw width: 150mm Extension: 150mm The jaws are made of high quality steel, hardened to 45 HRC 5 Â ± 5 Fixing screws
On request617,72 € with VAT -
York 200mm Titanium workshop vice
York York locksmith's vice, type TITAN This line of Czech YORK vices has been developed for heavy use in heavy-duty operations where the classic "red" series of vices is no longer enough. Jaws have a width of 200mm, a maximum opening of 220mm. Anvil size 200x80mm. The swivel base has a dimension of 230 x 200mm.
On request961,64 € with VAT -
Workshop vice York 250mm Titanium
York York locksmith's vice, type TITAN This line of Czech YORK vices has been developed for heavy work in heavy-duty operations where the classic "red" line of vice is no longer enough. Jaws have a width of 250mm, a maximum opening of 220mm. Anvil size 200x80mm. The swivel base has a dimension of 230 x 200mm.
On request1.078,94 € with VAT -
Set of spare Standart jaws for the old type of vice YORK 125mm
Replacement jaws for the older type of vice YORK 125 mm (year of manufacture 19xx) Length of jaws: 125mm Jaw width: 12mm Jaw height: 22mm Spacing of clamping holes: 76mm, position 8.5mm from the upper side Position of the hole for the centering pin - approx. 8.5 mm from the upper side Clamping holes for screw: M6 (recessed head) Hardness: 45 HRC Screws can be purchased separately from us
In stock27,02 € with VAT -
Reduction bushing SK ISO 50/5, ČSN 241481, Zbrojovka
Clearance saleReducing insert - reduction for milling machine through short, ISO50/MK5, ISO50/5 Outer steep taper ISO50 Inner steep taper morse 5 Total length: 150mm For tools - milling cutters or other reduction bushings with MK5 cone Standard: old Czech milling reduction - custom production 19xx, predecessor of ČSN 241481 Also applicable for DIN2080 - manual tool change (through reduction)
On request113,81 € with VAT