Clamping tools
-
Clamps for milling
-
Drill chucks
-
Clamps for classic lathes
-
Clamps for NC lathes
-
Universal chucks and acc.
-
Drill chucks
-
Vices, dividers and tables
-
Reduction sleeves
-
Magnet. clamps, demagnetizers
-
Boring heads
-
Clamping accessories
-
Quick-change drill chuck 2.0 - 13 mm GRIP with 1/2 inch 20 UNF thread
Clamping range: 2-13mm Clamping thread: 1/2 "x 20 UNF, 20 strokes per inch (corresponds to 12.7mm) Body Diameter: 43mm Total Height: 63 / 74mm Usage: Narex Classical and Battery Drills. on the body of the existing chuck where the clamping thread should be provided.
In stock10,29 € with VAT -
Quick-change drill chuck 2.0 - 13 mm with 1/2 inch thread 20UNF - ACTION
Clamping range: 2-13mm Clamping thread: 1/2 "x 20 UNF, 20 strokes per inch (equivalent to 12.7mm ) Body Diameter: 43mm Total Height: 62 / 74mm Usage: Narex Classical and Battery Drills, etc. If you change the chuck look at the body of the existing chuck, where the clamping thread should be provided.
In stock3,10 € with VAT -
Collet chuck W16-ER11-150L with cylindrical shank
ER11 collet holder with cylindrical shank 16mm, L=150mm Collet holder, collet head for NC - ER 11, cylindrical shank with weldon surface Clamping range of ER11 clamp: 1.0 - 7.0mm Diameter of the clamping shank: 16 mm Length of the clamping part: 100mm Total length of the clamp: 120mm Diameter of the through hole: 7.9mm Diameter of clamping nut: hexagon 19mm Nut thread: M14x0.75 Throwability: up to 0.005mm Balance: G2.5 / 20,000 rpm ER11 collets (outer diameter 11mm) can be purchased separately - see related products Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture. Usage : Clamping of drills, cutters and other tools with a cylindrical shank As a tap without length compensation and reversal - for clamping taps Clamping possible in a collet and in a weldon clamp.
In stock41,59 € with VAT -
Universal magnetic blocks 64x143x71mm, WBM500
Set of 2 pieces of permanent magnetic clamping blocks with prism The perfect helper for reliable and very strong clamping of parts during welding, hand grinding, drilling, needling, etc. Clamping force: 5-10kN / cm2 Dimensions: Width: 64mm Length: 143mm Height: 71mm Easy activation with a change-over key - by turning 90 degrees. The blocks have 3 clamping surfaces(top, bottom and side). Magnetic block bodies are completely nickel-plated for high corrosion protection. Clamping blocks can be connected to each other by means of a hexagonal coupling - this makes it possible to create a clamping surface for larger or longer workpieces. Package includes: 2pcs of magnetic blocks * Switching wrenches * Instructions for use Optional accessories: * Connecting hexagonal shank for connecting several magnetic blocks to the series (in a row) * Various adjustments of the saw blades according to the customer's needs Cat.A „. : WBM500
On requestPrice - On request -
Universal magnetic blocks 64x178x71mm, WBM700
Set of 2 pieces of permanent magnetic clamping blocks with prism The perfect helper for reliable and very strong clamping of parts during welding, hand grinding, drilling, needling, etc. Clamping force: 5-10kN / cm2 Dimensions: Width: 64mm Length: 178mm Height: 71mm Easy activation with a change-over key - by turning 90 degrees. The blocks have 3 clamping surfaces(top, bottom and side). Magnetic block bodies are completely nickel-plated for high corrosion protection. Clamping blocks can be connected to each other by means of a hexagonal coupling - this makes it possible to create a clamping surface for larger or longer workpieces. Package includes: 2pcs of magnetic blocks * Switching wrenches * Instructions for use Optional accessories: * Connecting hexagonal shank for connecting several magnetic blocks to the series (in a row) * Various adjustments of the saw blades according to the customer's needs Cat.A „. : WBM700
On requestPrice - On request -
Universal magnetic blocks 87x184x88mm, WBM700
Set of 2 pcs of permanent magnetic clamping blocks with prism The perfect helper for reliable and very strong clamping of parts during welding, hand grinding, drilling, needling, etc. Clamping force: 5-10kN / cm2 Dimensions: Width: 87mm Length: 184mm Height: 88mm Easy activation with a change-over key - by turning 90 degrees. The blocks have 3 clamping surfaces(top, bottom and side). Magnetic block bodies are completely nickel-plated for high corrosion protection. Clamping blocks can be connected to each other by means of a hexagonal coupling - this makes it possible to create a clamping surface for larger or longer workpieces. Package includes: 2pcs of magnetic blocks * Switching wrenches * Instructions for use Optional accessories: * Connecting hexagonal shank for connecting several magnetic blocks to the series (in a row) * Various adjustments of the saw blades according to the customer's needs Cat.A „. : WBM1000
On requestPrice - On request -
Quick-change drill chuck 2.0 - 13 mm GRIP with 1/2 inch 20 UNF thread
Clamping range: 2-13mm Clamping thread: 1/2 "x 20 UNF, 20 strokes per inch (corresponds to 12.7mm) Body Diameter: 43mm Total Height: 63 / 74mm Usage: Narex Classical and Battery Drills. on the body of the existing chuck where the clamping thread should be provided.
In stock13,42 € with VAT -
Angle magnet, magnetic clamp 190x125x26mm - angles 45°, 90°, 135°, Corona
Practical angular magnet, welding clamp for easy holding of metals in welding, drilling, riveting, ..... Can be used for angle clamping: 45, 90, 135 ° Dimensions (maximum dimension): Height: 125mm Width: 190mm Thickness: 26mm
In stock9,75 € with VAT -
Angle magnet, magnetic clamp 95x65x13 angles 30°, 45°, 75°, 60°, 90°, Corona
Practical angular magnet, welding clamp for easy metal holding in welding, drilling, riveting, ..... Allows to hold material at angles 30, 45, 60, 75 and 90 ° < b> Dimensions (Max Dimension): Height: 65mm Width: 95mm Thickness: 13mm
On request3,52 € with VAT