Clamping tools

Clamping range: 2-13mm Clamping thread: 1/2 "x 20 UNF, 20 strokes per inch (corresponds to 12.7mm) Body Diameter: 43mm Total Height: 63 / 74mm Usage: Narex Classical and Battery Drills. on the body of the existing chuck where the clamping thread should be provided.

Clamping range: 2-13mm Clamping thread: 1/2 "x 20 UNF, 20 strokes per inch (equivalent to 12.7mm ) Body Diameter: 43mm Total Height: 62 / 74mm Usage: Narex Classical and Battery Drills, etc. If you change the chuck look at the body of the existing chuck, where the clamping thread should be provided.

Clamping range: 2-13mm Clamping thread: 3/8 "x 24 UNF, 24 strokes per inch (equivalent to 9,525mm) Body Diameter: 43mm Total Height: 62 / 74mm Usage: Handheld Classic and Battery Drills Black

Set of hook-up wrenches with tooth and pin for lock nuts and KM nuts The set includes wrenches: 35-60mm, key length 160mm 60-90mm, wrench length 180mm 90-120mm, wrench length 250mm Pins have a diameter of 4, 5, 6 and 8mm

Uses to correctly create a negative pressure between the clamping plate and the workpiece. Length: 1m This sealing cord can also be used to define small irregularities on the surface of the workpiece.

ER11 collet holder with cylindrical shank 16mm, L=150mm Collet holder, collet head for NC - ER 11, cylindrical shank with weldon surface Clamping range of ER11 clamp: 1.0 - 7.0mm Diameter of the clamping shank: 16 mm Length of the clamping part: 100mm Total length of the clamp: 120mm Diameter of the through hole: 7.9mm Diameter of clamping nut: hexagon 19mm Nut thread: M14x0.75 Throwability: up to 0.005mm Balance: G2.5 / 20,000 rpm ER11 collets (outer diameter 11mm) can be purchased separately - see related products Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture. Usage : Clamping of drills, cutters and other tools with a cylindrical shank As a tap without length compensation and reversal - for clamping taps Clamping possible in a collet and in a weldon clamp.

Set of 2 pieces of permanent magnetic clamping blocks with prism The perfect helper for reliable and very strong clamping of parts during welding, hand grinding, drilling, needling, etc. Clamping force: 5-10kN / cm2 Dimensions: Width: 64mm Length: 143mm Height: 71mm Easy activation with a change-over key - by turning 90 degrees. The blocks have 3 clamping surfaces(top, bottom and side). Magnetic block bodies are completely nickel-plated for high corrosion protection. Clamping blocks can be connected to each other by means of a hexagonal coupling - this makes it possible to create a clamping surface for larger or longer workpieces. Package includes: 2pcs of magnetic blocks * Switching wrenches * Instructions for use Optional accessories: * Connecting hexagonal shank for connecting several magnetic blocks to the series (in a row) * Various adjustments of the saw blades according to the customer's needs Cat.A „. : WBM500

Set of 2 pieces of permanent magnetic clamping blocks with prism The perfect helper for reliable and very strong clamping of parts during welding, hand grinding, drilling, needling, etc. Clamping force: 5-10kN / cm2 Dimensions: Width: 64mm Length: 178mm Height: 71mm Easy activation with a change-over key - by turning 90 degrees. The blocks have 3 clamping surfaces(top, bottom and side). Magnetic block bodies are completely nickel-plated for high corrosion protection. Clamping blocks can be connected to each other by means of a hexagonal coupling - this makes it possible to create a clamping surface for larger or longer workpieces. Package includes: 2pcs of magnetic blocks * Switching wrenches * Instructions for use Optional accessories: * Connecting hexagonal shank for connecting several magnetic blocks to the series (in a row) * Various adjustments of the saw blades according to the customer's needs Cat.A „. : WBM700

Set of 2 pcs of permanent magnetic clamping blocks with prism The perfect helper for reliable and very strong clamping of parts during welding, hand grinding, drilling, needling, etc. Clamping force: 5-10kN / cm2 Dimensions: Width: 87mm Length: 184mm Height: 88mm Easy activation with a change-over key - by turning 90 degrees. The blocks have 3 clamping surfaces(top, bottom and side). Magnetic block bodies are completely nickel-plated for high corrosion protection. Clamping blocks can be connected to each other by means of a hexagonal coupling - this makes it possible to create a clamping surface for larger or longer workpieces. Package includes: 2pcs of magnetic blocks * Switching wrenches * Instructions for use Optional accessories: * Connecting hexagonal shank for connecting several magnetic blocks to the series (in a row) * Various adjustments of the saw blades according to the customer's needs Cat.A „. : WBM1000

Clamping range: 2-13mm Clamping thread: 1/2 "x 20 UNF, 20 strokes per inch (corresponds to 12.7mm) Body Diameter: 43mm Total Height: 63 / 74mm Usage: Narex Classical and Battery Drills. on the body of the existing chuck where the clamping thread should be provided.

Practical angular magnet, welding clamp for easy holding of metals in welding, drilling, riveting, ..... Can be used for angle clamping: 45, 90, 135 ° Dimensions (maximum dimension): Height: 125mm Width: 190mm Thickness: 26mm

Practical angular magnet, welding clamp for easy metal holding in welding, drilling, riveting, ..... Allows to hold material at angles 30, 45, 60, 75 and 90 ° < b> Dimensions (Max Dimension): Height: 65mm Width: 95mm Thickness: 13mm