Clamping tools

Branded vise with tilting in three axes. Rotatable, foldable. Width of the jaws: according to the selected variant Additional dimensions and parameters - see the attached catalog sheet or product description for individual variants The vise can be rotated 360° on the base. Vise tilt 0-90° horizontally and 0-45° vertically.

Reduction insert, milling reduction with Morse cavity - for clamping threaded tools - milling cutters Clamping cone: according to the selected variant Internal Morse cone: according to the selected variant Length of the clamp (the part that sticks out from the spindle): according to the selected variant The tool inserted into this reducer is clamped in the inner cone with a screw. Standard: ČSN 247211.1, DIN 2080 Usage: Clamp / mandrel for cutters with a conical shank For clamping in ISO steep taper milling machine - manual tool change (DIN2080)

Three-jaw lathe chuck / universal chuck with set of soft split SD jaws + hard outer OJS and hard inner IJS jaws and handle Diameter: according to the selected variant Clamping: M1 Additional dimensions and parameters - see the attached PDF Accuracy, throwability - see the attached PDF Additional sets of internal and external faceplates can be purchased - see related products. To the soft split jaws, it is possible to purchase a locking ring for precise adjustment of the outer and inner contact surfaces of the soft jaws - see related products. The chuck has a lubricator directly on the face of the chuck, we recommend oil KV 100 when machining without rinsing or Gleit µHP 520TS / MOGUL CALSUL 2 WR when machining with rinsing. The chuck is supplied in a paper box with Czech instructions.

ISO steep taper collet clamp ISO cone size: according to the selected variant For ER collets: according to the selected variant Length of the clamp (the part that sticks out from the spindle): according to the selected variant Throwability: up to 0.005mm Standard: DIN 2080, DIN 6499 - manual tool change If you are not sure that you have chosen the right clamp / you are not sure about the standard, you can find a comparison of this standard with other standards in the photos. Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture.

Three-jaw lathe chuck / universal with a set of external OJS and internal IJS jaws and a handle, with a short taper type D - camlock pins - ČSN 243830 / DIN55029 Diameter: according to the selected variant Clamping Camlock - size: according to the selected variant Additional dimensions and parameters - see the attached PDF Accuracy, throwability - see the attached PDF Additional sets of internal and external faceplates can be purchased - see related products. The chuck has a lubricator directly on the face of the chuck, we recommend oil KV 100 when machining without rinsing or Gleit µHP 520TS / MOGUL CALSUL 2 WR when machining with rinsing. The chuck is supplied in a paper box with Czech instructions. Suitable e.g. for lathes with camlock DIN ISO 702-2

Three-jaw lathe chuck / universal chuck with set of outer SCV and inner SCN jaws and loop Diameter: according to the selected variant Standard: ČSN 243801 Clamping: M1 (from the back of the chuck), other clamping style on request, or we can offer a suitable intermediate flange Additional dimensions and parameters - see the attached PDF Accuracy, throwability - see the attached PDF Additional sets of internal and external faceplates can be purchased - see related products.

ISO steep taper collet clamp ISO cone size: according to the selected variant For ER collets: according to the selected variant Length of the clamp (the part that sticks out from the spindle): according to the selected variant Balance: G6.3 / 12,000 rpm. , or according to the selected variant Throwability: up to 0.005mm Standard: DIN69871 - automatic tool change If you are not sure that you have chosen the right clamp / you are not sure about the standard, you can find a comparison of this standard with other standards in the photos. Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture.

Tilting 2-axis tilting rotary machine vise with precision base Width of the jaws: according to the selected variant Other dimensions - see attached catalog sheet or product description for individual variants Scale on both axes - see attached photo

Machine comb vise, quality production - Michalovce Jaw width: 250mm Jaw height: 100mm The sliding jaw is tiltable and adjustable - comb bed. Maximum opening: 550mm Total length of the vise: 800mm Total height of the vise: 200mm ČSN 243145 The movable jaw is swingable by 15° to both sides from the longitudinal axis. Packaged in a beautiful wooden case. The vise is without a handle. Weight on request.

Three-jaw lathe chuck / universal chuck with set of outer SCV and inner SCN jaws and loop Diameter: according to the selected variant Standard: ČSN 243809 / DIN 6350 Clamping: M2 (from the front side of the chuck), other clamping style on request, or we can offer a suitable intermediate flange Additional dimensions and parameters - see the attached PDF Accuracy, throwability - see the attached PDF Additional sets of internal and external faceplates can be purchased - see related products.

ISO steep taper collet clamp ISO cone size: according to the selected variant For ER collets: according to the selected variant Length of the clamp (the part that sticks out from the spindle): according to the selected variant Balance: G6.3 / 12,000 rpm. , or according to the selected variant Throwability: up to 0.005mm Standard: JIS B 6339 (MAS BT) - automatic tool change If you are not sure that you have chosen the right clamp / you are not sure about the standard, you can find a comparison of this standard with other standards in the photos. Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture.

Morse taper collet clamp - for Czech spindles Morse cone: according to the selected variant For ER type collets: according to the selected variant Performance of the ER matrix: according to the selected variant Other dimensions - see product description for individual variants Usage : The collet clamp has an overseas cone driving nut that fits the spindles of Czech machines. I.e. these clamps are suitable for Czech spindles that carry tools through this nut + thread. These clamps are suitable for all types - Czech, Chinese and other - spindles with a morse taper. Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture.