Clamping tools

Pair of unused prism cubes with 1 notch from Vertex ( V-cube backing without yoke / prismatic cube ) Dimensions (dimensions according to the attached photo): L: according to the selected variant W : according to the selected variant H : according to the selected variant Other dimensions - see the attached table The accuracy of the flatness of the prismatic grooves for a pair: up to 0.05mm (with a max. distance of the cubes 300mm apart) The price is for a pair - i.e. for 2 cubes

The driving heart is used for turning the workpiece when clamped between the tips For diameters: according to the selected variant Suitable for grinding or turning between points The drifting of the object is done via an eccentric lever. The front is engaged by a spring, the eccentric lever rests against a pin stop on the lathe flange - see attached catalog sheet.

High-quality locksmith's vise YORK mm of Czech production with anvil. Width of the jaws: according to the selected variant The jaws are made of high-quality steel hardened to 45 HRC +- 5 HRC. The vise is equipped with a set of basic jaws (hard jaws). Integrated rotary plate +- 35° with positioning screws. Precise cylindrical guidance. Gate with safety terminals. York standard type: fixed to the base plate with nuts, without special surface treatment. Other special types of jaws can be found in the folder "Jaws for YORK vices"

Machine vise with movable jaw - with grooved jaws ČSN 243135 for rigid and precise clamping of the workpiece Width of the jaws: according to the selected variant Height of the jaws (after the bed): according to the selected variant, or see the product description for the individual variants Other dimensions - see product description for individual variants Perpendicularity - parallelism of functional surfaces: 0.02 / 100 mm Standard: ČSN 243135 (125mm and 160mm), ČSN 243136 (200mm) Material: Body: ductile iron with min. tensile strength 400MPa Jaws: steel 14220.4, hardness 56+2 HRC

Milling mandrel for clamping cylindrical socket cutters Clamping cone: according to the selected variant Diameter of the cylindrical part for the socket cutter: according to the selected variant Distance from the collar to the end of the clamping part: according to the selected variant Other dimensions - see product description for individual variants Method of clamping the cutter: stones and screw Standard: ČSN241440 / DIN2080 - manual tool change If you are not sure that you have chosen the right clamp / you are not sure about the standard, you can find a comparison of this standard with other standards in the photos. Goods from excess stock, unused

Reduction insert, milling reduction with Morse cavity - for clamping tools with a driver - drills, countersinks, etc. Clamping cone: according to the selected variant Internal Morse cone: according to the selected variant Length of the clamp (the part that sticks out from the spindle): according to the selected variant Design: see product name and photo of individual variants Standard: DIN 2080, ČSN 247211.1 - manual tool change If you are not sure that you have chosen the right clamp / you are not sure about the standard, you can find a comparison of this standard with other standards in the photos.

Permanent neodymium (PrNd) magnet Sanding plate with fine pole design. Suitable for holding small and thin workpieces Magnet size: according to the selected variant Other dimensions - see product description for individual variants Nominal clamping force 140N/cm2 Flatness: 0.005mm/100mm Pole distance: Brass (P1) 0.5mm, steel (P2) 1.5mm Accessories: Allen key and clamps for holding the magnet Usable for EDM applications, immersion in dielectric liquids. Usage: under the sander If you need a magnet for a milling machine, we recommend magnets from the PMAG series

Rotating machine vice with full bed and groove for draining liquid Width of the jaws: according to the selected variant Revolving range: 360° Other dimensions - see attached catalog sheet or product description for individual variants Possible clamping with or without a wheel - both surfaces ground.

High-quality locksmith's vise YORK mm of Czech production with anvil Width of the jaws: according to the selected variant The jaws are made of high-quality steel hardened to 45 HRC +- 5 HRC. The vise is equipped with a set of basic jaws (hard jaws). Integrated rotating plate +- 35° with positioning handles. Precise cylindrical guidance. Gate with safety terminals. Type York Lux : * Fastening to the base plate with loops *Spindle and handles zinc chromated. Other special types of jaws can be found in related products

Milling mandrel for clamping cylindrical socket cutters Clamping cone: according to the selected variant Diameter of the cylindrical part for the socket cutter: according to the selected variant Distance from the collar to the end of the clamping part: according to the selected variant Other dimensions - see product description for individual variants Method of clamping the cutter: stones and screw Standard: DIN 2080 / ČSN241440 - manual tool change If you are not sure that you have chosen the right clamp / you are not sure about the standard, you can find a comparison of this standard with other standards in the photos.

Reduction insert, milling reduction with Morse cavity - for clamping tools with a driver - drills, countersinks, etc. Clamping cone: according to the selected variant Internal Morse cone: according to the selected variant Length of the clamp (the part that sticks out from the spindle): according to the selected variant Design: see product name and photo of individual variants Standard: DIN 2080, ČSN 247211.1 - manual tool change If you are not sure that you have chosen the right clamp / you are not sure about the standard, you can find a comparison of this standard with other standards in the photos.

V-cube with yoke - 1pc, control drawing prism cube with yoke Prism length: according to the selected variant Cube width: according to the selected variant Dice height: according to the selected variant Clamping range: see product description for individual variants DIN876/1