Clamping tools

Reduction insert, milling reduction with Morse cavity - for clamping tools with internal thread Clamping cone: according to the selected variant Internal Morse cone: according to the selected variant Length of the clamp (the part that sticks out from the spindle): according to the selected variant Design: see product name and photo of individual variants Standard: DIN 2080, ČSN 247211.1 - manual tool change If you are not sure that you have chosen the right clamp / you are not sure about the standard, you can find a comparison of this standard with other standards in the photos.

Three-jaw lathe scroll chuck / universal with a set of external OJS and internal IJS jaws and a handle Diameter: according to the selected variant Clamping: M1 (from the back of the chuck) * The HardLine design has hardened guide grooves of the jaws, the chuck has a longer service life, the grooves do not squeeze out. Additional dimensions and parameters - see the attached PDF Accuracy, accuracy - see the attached PDF Additional sets of internal and external faceplates can be purchased - see related products. The chuck has a lubricator directly on the face of the chuck, we recommend KV 100 oil for machining without rinsing or Gleit µHP 520TS / MOGUL CALSUL 2 WR petroleum jelly for machining with rinsing. The chuck is supplied in a paper box with Czech instructions.

Three-jaw lathe chuck / universal with a set of external OJS and internal IJS jaws and a handle Diameter: according to the selected variant Clamping: M3 (screws from the front only), or M2 (screws from the front and from the back) Additional dimensions and parameters - see the attached PDF Accuracy, throwability - see the attached PDF Additional sets of internal and external faceplates can be purchased - see related products. The chuck has a lubricator directly on the face of the chuck, we recommend oil KV 100 when machining without rinsing or Gleit µHP 520TS / MOGUL CALSUL 2 WR when machining with rinsing. The chuck is supplied in a paper box with Czech instructions. Including a set of Allen screws for clamping from the front only (type M3). Suitable for grinders, dividers, rotary tables, etc.

Direct milling collet with Morse taper - for direct clamping For a tool with a diameter: according to the selected variant Morse cone : MK1 Internal thread of collet: M6 Other dimensions: see product description for individual variants Usage : For direct clamping of tools with a cylindrical shank The collet is hardened: HRC 44-48 Material: tool steel with high flexibility (65Mn)

Permanent magnet for rough milling, drilling and grinding. Work area: according to the chosen variant Other dimensions - see product description for individual variants Magnet is waterproof - it can be used with cooling liquid. The pressure is reduced if the clamped surface is uneven (air gaps 100-50%) or contains cast iron (80-50%).

Milling tilting table with T-slots / with T-slot Size: according to the selected variant Other dimensions - see product description for individual variants Scale: 45°-0°-45° Max. tilting in the range: 50°- 0°- 50° (i.e. also off the scale) Flatness of table surface: 0.005 mm /100mm Portability: 20' Usage : Under a milling machine, drill or sharpener

Universal 4 jaw chuck for use on wood lathe / wood lathe with dovetail jaws Diameter of the chuck: according to the selected variant Clamping thread of the chuck: according to the selected variant Other dimensions - see product description for individual variants Four-jaw design

Boring head for boring knives Head size (diameter): according to the selected variant Clamping thread for mandrel : 1 1/2" - 18 threads per inch (see related products) The package includes a head + Allen key Knives for the head can be purchased additionally - see related products

Right radial / longitudinal knife holder, type B1 for turning knives VDI size (clamping diameter): according to the selected variant For knives of height: according to the selected variant Cooling: according to the selected variant * see the attached table for other dimensions Standard: DIN 69880 / DIN ISO 10889-1 (VDI) B1 Usage: for NC / turret lathes

Brand precision machine vise with precision and large opening. Width of the jaws: according to the selected variant Other dimensions and parameters - see the product description for individual variants or see the attached catalog sheet The prismatic jaw can be purchased additionally - see related products Possible clamping with or without a wheel - both surfaces ground.

Rectangular angle plate for clamping, with reinforced arm Dimensions: according to the selected variant Other dimensions and parameters - see the attached catalog sheet Dimensions of grooves - on request The plate is used for precise clamping / angling of the object during machining, outlining, etc. Material: High-strength cast iron Grinded functional surfaces with flatness up to 0.01mm / 100mm.

Rectangular angle plate for clamping Dimensions: according to the selected variant Other dimensions and parameters - see the attached catalog sheet Dimensions of grooves - on request The plate is used for precise clamping / angling of the object during machining, outlining, etc. Material: High-strength cast iron Grinded (all) surfaces with flatness up to 0.01mm / 100mm.