UNF - American whitworth

Machine tap, straight groove with chip breaker, for American unified whitworth thread Thread type: UNF - fine American unified inch thread (UNified thread Fine) Size: according to the chosen variant Matching: 2B Form: B Material: HSSE - High speed Steel + 5% cobalt Co5 Standard: ANSI B 1.1 Usage: Well machinable materials up to 900 N / mm2 Non-alloy and low-alloy steels For through holes

Machine tap spiral, for American unified fine thread Thread type: UNF - fine American unified inch thread (UNified thread Fine) Size: according to the chosen variant Matching: 2B Form: C Helix: 35 ° Material: HSSE - High speed Steel + 5% cobalt Co5 Standard: ANSI B 1.1 Usage: Well machinable materials up to 900 N / mm2 Non-alloy and low-alloy steels For blind holes

UNF machine tap with straight groove and chip breaker 800X Thread type: UNF - American inch thread (UNified Fine thread) Matching: 2B Material: HSSE (High speed steel + 5% Cobalt) Coating: TiN - Titanium nitride Ground thread profile Standard: DIN 371, DIN374 Usage: Steel Food stainless steel Cast iron Non-ferrous metals

Universal machine tap (quick-cutting) with chip breaker, straight slot, MasterTap series Fitting: 2BX, ground thread profile Material: HSSE-PM (High-speed steel +5% Cobalt, production by sintering) Coating : HL - Balinit HardLube with carbide component (TiAlN + WC / C) with hardness 2600 HV Grounded thread profile Standard: DIN 371 / DIN376 Thread start: B, 4 courses - see attached photo Usage: Universal - for steels, stainless steels, cast iron, non-ferrous metals and heat-resistant steels, can be used in emergencies and for piece cutting of threads in hardened steel. Suitable for machining centers, possibly also for older types of numerical and conventional machines with lower performance.

Machine spiral tap (quick-cutting) UNF, R40 SE 800 Thread type: UNF - fine American unified inch thread (UNified thread Fine) Fitting: 2B, ground thread profile Standard: DIN 371 / DIN 374, ANSI B-1.1 Thread start: C, 2-3 courses - see attached photo Material: HSSE (High speed steel +5% Cobalt) Coating: without coating Top thread angle: 60° Helix angle: 40° Usage: Structural and carbon steel, low-alloy steel, cast steel up to 800N/mm2 Brass with a long chip Automatic steel, structural and cement steel Spherical and malleable cast iron Unalloyed and low-alloyed copper alloys Aluminum alloys with Si content < 5% Thermoplastics

Machine tap UNF spiral 800X Type of thread: UNF (UNified thread Fine) - American inch unified thread fine Fitting: 2B Material: HSSE (High speed steel + 5%Cobalt) Coating: TiN - Titanium Nitride Grounded thread profile Standard: DIN 371, DIN376 Usage: Steel Food grade stainless steel Cast iron Non-ferrous metals

Machine UNF spiral tap (high speed) R45 PM in helix Standard: DIN 371 Thread lead: C, 2 turns - see attached photo Material: HSSE-PM (High speed steel + 5% Cobalt, sintering) Ground thread profile Coating: HL - Balinit HardLube with carbide component (TiAlN + WC / C) with hardness 2600 HV Helix angle: 45 ° Usage: Universal - for steels, stainless steels, cast iron, non-ferrous metals and heat-resistant steels, can also be used for emergency threading of hardened steel. Suitable for machining centers, or even for older types of numerical and conventional machines with lower power.

Machine spiral tap (high speed) R40 PM TC 1200 in FAN helix Thread type: UNF (UNified thread Fine) - American inch unified fine thread Matching: 2B Material: HSSE-PM (High speed steel + 5% Cobalt, sintering production) Coating: TiAlSiN Top thread angle: 60 ° Helix angle: 40 ° Thread lead: C, 2 turns - see attached photo Ground thread profile Standard: DIN 371, DIN374 Usage: 1.4: Alloy steels, cold drawn tool steel up to 1000N / mm2 1.5: Hardened and hardened steels up to 38 HRC up to 1200N / mm2 2.1: Ferritic and martensitic stainless steel up to 1000N / mm2 2.3: Heat-resistant stainless steel up to 1100N / mm2 3.3: Ball and malleable cast iron up to 700N / mm2 3.4: Ball and malleable cast iron up to 1000N / mm2 1.3: Structural and carbon steel, low-alloy steel, steel castings up to 1100N / mm2 6.4: Bronze and aluminum up to 1200N / mm2 7.4: Aluminum alloys with silicon content Si> 10%, up to 400N / mm2 8.2: Thermosets and hardened plastics