Turning
-
Lathe knives and inserts
-
Dead and live centers
-
Quick release heads and bushings
-
Reduction sleeves for lathes
-
Thread cutter for lathe
-
Quick-change holders
-
Handlebars and holders
-
Lathe mandrels
-
Centering drills - drills
-
Collet chucks with flange
-
Milling supports
-
Lathe accessories
-
Lathe turning insert holder SRDCN
Front holder for inserts / knife for external turning, screw clamping Clamping dimensions: according to the selected variant Designation of the plates that fit into the holder: according to the selected variant Other dimensions - see product description of individual variants. A key for changing the plate is supplied with the goods. The plate is not part of the package, it can be purchased separately. General information on choosing the right holder: Holders type "S" - with screw clamping are suitable for common to finishing operations. They are suitable for smaller material removals. The inserts in these holders have a positive insert back, which enables sharper insert geometries and thus the possibility of achieving a better surface quality. Holders of type "P", "M", "T", "C" and "D" with clamping per inch or clamp are suitable for common to roughing operations - they have higher rigidity. The inserts in these holders have a negative (straight) insert back, thanks to which the inserts do not break out / deform so much and it is possible to roughen them with better and to machine even harder machinable materials.
from 32,59 € with VAT -
Lathe turning insert holder SVVBN
Front holder for inserts / knife for external turning, screw clamping Clamping dimensions: according to the selected variant Designation of the plates that fit into the holder: according to the selected variant Other dimensions - see product description of individual variants. A key for changing the plate is supplied with the goods. The plate is not part of the package, it can be purchased separately. General information on choosing the right holder: Holders type "S" - with screw clamping are suitable for common to finishing operations. They are suitable for smaller material removals. The inserts in these holders have a positive insert back, which enables sharper insert geometries and thus the possibility of achieving a better surface quality. Holders of type "P", "M", "T", "C" and "D" with clamping per inch or clamp are suitable for common to roughing operations - they have higher rigidity. The inserts in these holders have a negative (straight) insert back, thanks to which the inserts do not break out / deform so much and it is possible to roughen them with better and to machine even harder machinable materials.
from 29,00 € with VAT -
Front turning knife for TCMT and TCGT inserts with exchangeable insert and key
Clearance saleHobby face turning knife mm with replaceable insert and key Clamping dimension: according to the selected variant Marking of the plates in the holder: according to the selected variant The holder is not heat treated - it is not cloudy! Suitable for turning plastic, wood and soft metals (copper, aluminum, etc.)
from 10,62 € with VAT -
Turning knife right for TCMT and TCGT inserts with exchangeable insert and key
Clearance saleHobby right turning knife mm with exchange plate and key Clamping dimension: according to the selected variant Marking of the plates in the holder: according to the selected variant The holder is not heat treated - it is not cloudy! Suitable for turning plastic, wood and soft metals (copper, aluminum, etc.)
from 12,62 € with VAT -
Left-hand turning knife for TCMT and TCGT inserts with exchangeable insert and key
Clearance saleHobby left-hand turning knife mm with replaceable insert and key Clamping dimension: according to the selected variant Marking of the plates in the holder: according to the selected variant The holder is not heat treated - it is not cloudy! Suitable for turning plastic, wood and soft metals (copper, aluminum, etc.)
from 12,62 € with VAT -
Turning knife left-sided straight DIN 4971 L / CSN 223711
Clearance saleTurning knife straight straight with soldered blade Knife size: (clamping height x width): according to the selected variant Overall length: see product description for selected variant Carbide: according to the selected variant Carbide marking: P - steel K - cast iron U - stainless steel, heat-resistant alloys Carbide numbering: 05 - finishing - extra hard / brittle carbide, uninterrupted cut, very good final surface 10 - finishing - hard / brittle carbide, uninterrupted cut, very good final surface 20 - semi-roughing - clean turning 30 - roughing, interrupted cut 45 - extra roughing, intermittent cutting, withstands poorer handling, turning under difficult conditions Use: according to the selected variant Standard: ČSN 223711 / CSN 22 3711, DIN4971, DIN4971L, ISO1 Attention - these soldered knives are semi-finished products - before starting machining it is necessary to grind a suitable breaker. If you have nowhere to sharpen these knives, we recommend switching to holders with replaceable carbide inserts.
from 2,25 € with VAT -
Turning knife left-sided straight DIN 4971 L / CSN 223711 , DENAS
Turning knife straight straight with soldered blade Knife size: (clamping height x width): according to the selected variant Overall length: see product description for selected variant Carbide: according to the selected variant Carbide marking: P - steel K - cast iron U - stainless steel, heat-resistant alloys Carbide numbering: 05 - finishing - extra hard / brittle carbide, uninterrupted cut, very good final surface 10 - finishing - hard / brittle carbide, uninterrupted cut, very good final surface 20 - semi-roughing - clean turning 30 - roughing, interrupted cut 45 - extra roughing, intermittent cutting, withstands poorer handling, turning under difficult conditions Use: according to the selected variant Standard: ČSN 223711 / CSN 22 3711, DIN4971, DIN4971L, ISO1 Attention - these soldered knives are semi-finished products - before starting machining it is necessary to grind a suitable breaker. If you have nowhere to sharpen these knives, we recommend switching to holders with replaceable carbide inserts.
from 4,69 € with VAT -
Extended live center for NC machines , CSN 243327 , Skoda
The ŠKODA rotary chuck with extended tip (standard 24 3327) is intended for clamping workpieces on NC lathes. Morse taper: according to the selected variant Other dimensions and parameters - see the enclosed catalog sheet Standard: ČSN 24 3327 The narrow clamping part of the tip allows easy access of the tool to the workpiece, which is especially advantageous when machining shaped parts. The tip design allows the clearance in the front radial bearing to be adjusted. Swivel tips are equipped with a shank with a MORSE taper according to ČSN 22 0420 (DIN 228, ISO 296) without a clamping thread. Swivel tips are manufactured in an innovative maintenance-free design lubricated with lithium grease LV 2-3. The innovative design of the tips allows customers to service the product without service throughout its life. Disassembly of the rotating tips is not recommended.
from 151,46 € with VAT -
Dead live center 60 ° with carbide tip DIN806 / CSN 243311
Fixed lathe tip with 60 ° apex angle and sintered carbide insert Morse taper size: according to the selected variant Other dimensions - see labels for individual variants Standard: DIN806 / DIN806 / replacement ČSN 243311 / ČSN 24 3311
from 11,24 € with VAT -
Turning knife right-sided DIN 4972 R / CSN 223712
Clearance saleTurning knife, right, with soldered blade Square: according to the selected variant Overall length: see product description for selected variant Carbide: according to the selected variant Carbide marking: P - steel K - cast iron U - stainless steel, heat-resistant alloys Carbide numbering: 05 - finishing - extra hard / brittle carbide, uninterrupted cut, very good final surface 10 - finishing - hard / brittle carbide, uninterrupted cut, very good final surface 20 - semi-roughing - clean turning 30 - roughing, interrupted cut 45 - extra roughing, intermittent cutting, withstands poorer handling, turning under difficult conditions Use: according to the selected variant Standard: ČSN 223712 / CSN 22 3712, DIN4972, DIN4972R, ISO2 Attention - these soldered knives are semi-finished products - before starting machining it is necessary to grind a suitable breaker. If you have nowhere to sharpen these knives, we recommend switching to holders with replaceable carbide inserts.
from 3,40 € with VAT