Turning
-
Lathe knives and inserts
-
Dead and live centers
-
Quick release heads and bushings
-
Reduction sleeves for lathes
-
Thread cutter for lathe
-
Quick-change holders
-
Handlebars and holders
-
Lathe mandrels
-
Centering drills - drills
-
Collet chucks with flange
-
Milling supports
-
Lathe accessories
-
Internal turning knives HM 10 mm, set - 3 pcs(without case)
Set of Inside Professional Turning Knives with Interchangeable Plate Clamping Diameter: 10mm Set of Knives (Left): 1x S10K SCLCR 06 (95 °) for CCMT 0602 / CCGT 0602 1x S10K SDQCR 07 (107,5 °) for DCMT 0702 / DCGT 0702 1x S10K STFCR 11 (90 °) for TCMT 1102 / TCGT 1102 * total length of knives is 125mm < br> 1ks key Art.No. KN 3441640
In stock65,28 € with VAT -
Internal turning knives HM 12 mm, set - 3 pcs(without case)
S12M SCLCR 06 (95 °) for CCMT 0602 / CCGT 0602 1x S12M SDQCR 07 (107.5 °) for DCMT 0702 / DCGT 0702 1x S12M STFCR 11 (90 °) for TCMT 1102 / TCGT 1102 plates * total length of blades 150mm < br> 1ks key Art.No. KN 3441641
On request72,53 € with VAT -
Parting insert MRMN300-M NC3030 radius, Tornado
Radial Radial Cutting Radial Radial Cutting Plate, VBD - 3 mm Recess Width: 3mm Radius: 1,5mm Plate Length: 21,0 mm Plate Height: 5.7 mm Angle of Back: 7 ° Steel: P20-P30 Stainless Steel: M05-M10 Suitable for indoor and outdoor recesses with radius The price is for 1 piece, not for the whole package (10pcs)
In stock10,15 € with VAT -
Parting insert MRMN300-M NC3120 radius, Tornado
Radial Radial Cutting Radial Radial Cutting Plate, VBD - 3 mm Recess Width: 3mm Radius: 1,5mm Plate Length: 21,0 mm Plate Height: 5.7 mm Angle of Back: 7 ° Coating: MT-CVD: TiCN Al2O3 TiCN Application: Steel: P10-P35 Stainless steel: M05-M10 Suitable for indoor and outdoor recesses with radius The price is for 1 piece, not for the whole package (10pcs)
In stock10,15 € with VAT -
Collet chuck ER32 with flange diameter 80mm(without collets)
Clamping sleeve for ER collet lathe a: 24mm < br> b: 40mm c: 55mm d: 80mm e: 3x thread M6 (3x120 °) on axis o. 65mm Handle: up to 0,005mm Collets can be ordered separately as needed Kleštiny not included !!! Collet clamping procedure: Click the clamping nut into the clamping nut - according to the attached picture. Proma SM 300 E
On request70,80 € with VAT -
Collet chuck ER25 with flange diameter 100mm(without collets)
Clamping sleeve for ER collet lathe a: 20mm b: 40mm c: 72mm d: 100mm e: 3x thread M8 (3x120 °) on the axis o. 84mm Running: up to 0,005mm Collets can be purchased separately as needed. Colts are not included !!! Collet clamping procedure: Click the clamping nut into the clamping nut - according to the attached picture. Suitable for lathes - instead of a universal chuck
On request54,58 € with VAT -
Collet chuck ER32 with flange diameter 100mm(without collets)
Clamping sleeve for ER collet lathe a: 24mm b: 40mm c: 72mm d: 100mm e: 3x thread M8 (3x120 °) on the axis o. 85mm Running: up to 0,005mm Collets can be ordered separately as needed Kleštiny not included !!! Collet clamping procedure: Click the clamping nut into the clamping nut - according to the attached picture. Suitable for lathes - instead of a universal chuck
In stock78,69 € with VAT -
Collet chuck ER32 with flange diameter 125mm(without collets)
Clamping sleeve for ER collet lathe a: 24mm < br> b: 40mm c: 95mm d: 125mm e: 3x thread M8 (3x120 °) on the axis o. 108mm Handle: up to 0,005mm Collets can be purchased separately as needed Kleštiny not included !!! Collet clamping procedure: Click the clamping nut into the clamping nut - according to the attached picture. Suitable for lathes - instead of a universal chuck
In stock86,02 € with VAT -
Collet clamp 5C dia. 125mm, Camlock D3 clamping
Collet universal chuck for 5C collets with Camlock size 3 Clamping ranges: 5C collets round: 1-28mm 5C collets square: 3-19mm 5C collets hexagon : 3-22mm Parameters : Diameter : 125mm Clamping : Camlock D3 ( Cone diameter Dmax=53.90mm ; 3x pin on circle 70.60mm) Clamp height: 123mm Total height including D3 pins: 150mm Speed: 6000 rpm Square for tightening / loosening: 9x9mm Usage: This collet chuck is suitable for lathes and grinders, it is mounted directly on the lathe spindle. Together with the 5C collet set, it is used for effective and precise clamping of smoothed materials in the range of diameters from 1 to 28 mm.
In stock285,49 € with VAT -
Collet clamp 5C dia. 125mm, Camlock D6 clamping
Collet universal chuck for 5C collets with Camlock size 6 Clamping ranges: 5C collets round: 1-28mm 5C collets square: 3-19mm 5C collets hexagon : 3-22mm Parameters : Diameter : 125mm Clamping : Camlock D6 ( Cone diameter Dmax=106.30mm ; 6x pin on a circle 133.40mm) Clamp height: 145mm Total height including D5 pins: 190mm Speed: 6000 rpm Square for tightening / loosening: 9x9mm Usage: This collet chuck is suitable for lathes and grinders, it is mounted directly on the lathe spindle. Together with the 5C collet set, it is used for effective and precise clamping of smoothed materials in the range of diameters from 1 to 28 mm.
In stock374,65 € with VAT -
Collet clamp 5C dia. 125mm, Camlock D8 clamping
Collet universal chuck for 5C collets with Camlock size 8 Clamping ranges: 5C collets round: 1-28mm 5C collets square: 3-19mm 5C collets hexagon : 3-22mm Parameters : Diameter : 125mm Clamping : Camlock D8 ( Cone diameter Dmax=139.70mm ; 6x pin on a circle 171.40mm) Clamp height: 155mm Total height including D5 pins: 195mm Speed: 6000 rpm Square for tightening / loosening: 9x9mm Usage: This collet chuck is suitable for lathes and grinders, it is mounted directly on the lathe spindle. Together with the 5C collet set, it is used for effective and precise clamping of smoothed materials in the range of diameters from 1 to 28 mm.
In stock393,82 € with VAT