Turning
-
Lathe knives and inserts
-
Dead and live centers
-
Quick release heads and bushings
-
Reduction sleeves for lathes
-
Thread cutter for lathe
-
Quick-change holders
-
Handlebars and holders
-
Lathe mandrels
-
Centering drills - drills
-
Collet chucks with flange
-
Milling supports
-
Lathe accessories
-
Parting "radeco" holder including HSSCo5 tool bit
Holder for trapezoidal parting blade ČSN 223693 For radeco with clamping height: according to the selected variant Clamping height of the holder: see product description for individual variants Axial height: see product description for individual variants Set, contains: 1x Partition radeco blade holder according to ČSN 223693 - see product description for individual variants 1x Radeco trapezoidal parting HSSCo5 ČSN 223693 - see product description for individual variants Radeco is secured in the holder with 3 screws Material: hardened steel C50 - Czech production Radeco slices must be made according to the standard: ČSN 223693/22 3693 - see related products
from 24,31 € with VAT -
Live center with enlarged head, type VLC, VERTEX
Centering rotary tip with enlarged head Clamping Morse cone: according to the selected variant Other dimensions - see the attached catalog sheet Tip angle: 60° - 90° - see attached catalog sheet Material: alloyed tool steel, HRC 50
from 94,03 € with VAT -
Parting tool bit "radeco" holder CSN 223693 - screw type
Holder for trapezoidal parting blade ČSN 223693 For radeco with clamping height: according to the selected variant Clamping height of the holder: see product description for individual variants Axial height: see product description for individual variants Radeco is secured in the holder with 3 screws Material: hardened steel C50 - Czech production Radeco slices must be made according to standard: ČSN 223693/22 3693 Price includes holder only, advice must be purchased separately - see related products
from 9,85 € with VAT -
Dead center 60° DIN806 / CSN 243310
Lathe chuck with apex angle 60 ° Morse taper size: according to the selected variant Other dimensions - see labels for individual variants The whole tip is hardened to a hardness of HRC 58 to 62. Standard: DIN806 / DIN 806 / replacement ČSN 243310 / CSN 243310
9,78 € with VAT -
Turning knife right-sided straight DIN 4971 R / CSN 223710
Clearance saleTurning knife straight straight with soldered blade Knife size: (clamping height x width): according to the selected variant Overall length: see product description for selected variant Carbide: according to the selected variant Carbide marking: P - steel K - cast iron U - stainless steel, heat-resistant alloys Carbide numbering: 05 - finishing - extra hard / brittle carbide, uninterrupted cut, very good final surface 10 - finishing - hard / brittle carbide, uninterrupted cut, very good final surface 20 - semi-roughing - clean turning 30 - roughing, interrupted cut 45 - extra roughing, intermittent cutting, withstands poorer handling, turning under difficult conditions Use: according to the selected variant Standard: ČSN 223710 / CSN 22 3710, DIN4971, DIN4971R, ISO1 Attention - these soldered knives are semi-finished products - before starting machining it is necessary to grind a suitable breaker. If you have nowhere to sharpen these knives, we recommend switching to holders with replaceable carbide inserts.
from 1,91 € with VAT -
Turning knife right-sided straight DIN 4971 R / CSN 223710 , DENAS
Turning knife straight straight with soldered blade Knife size: (clamping height x width): according to the selected variant Overall length: see product description for selected variant Carbide: according to the selected variant Carbide marking: P - steel K - cast iron U - stainless steel, heat-resistant alloys Carbide numbering: 05 - finishing - extra hard / brittle carbide, uninterrupted cut, very good final surface 10 - finishing - hard / brittle carbide, uninterrupted cut, very good final surface 20 - semi-roughing - clean turning 30 - roughing, interrupted cut 45 - extra roughing, intermittent cutting, withstands poorer handling, turning under difficult conditions Use: according to the selected variant Standard: ČSN 223710 / CSN 22 3710, DIN4971, DIN4971R, ISO1 Attention - these soldered knives are semi-finished products - before starting machining it is necessary to grind a suitable breaker. If you have nowhere to sharpen these knives, we recommend switching to holders with replaceable carbide inserts.
from 4,69 € with VAT -
Parting tool bit "radeco" holder CSN 223693 - spring type
Holder for trapezoidal parting blade ČSN 223693 For radeco with clamping height: according to the selected variant Clamping height of the holder: see product description for individual variants Axial height: see product description for individual variants Material: hardened steel - Czech production Radeco slices must be made according to standard: ČSN 223693/22 3693 Price includes holder only, advice must be purchased separately - see related products
from 12,32 € with VAT -
Dead center 60° CSN 243310 , Skoda
Clearance saleLathe chuck with apex angle 60 ° Morse taper size: according to the selected variant Other dimensions - see labels for individual variants The whole tip is hardened to a hardness of HRC 58 to 62. Standard: ČSN 243310 / CSN 243310 Fixed tips are Czech-made, unused, come from excess stock. Only a limited selection.
from 11,98 € with VAT -
Live center 60° - CSN 243324 , Skoda
Morse swivel tip Morse taper: according to the selected variant Other dimensions and parameters - see product description for individual variants Top angle: 60 ° Standard: ČSN 24 3324 The tip has two classic + one needle bearing. The tip can be lubricated from the back of the screw or directly into the bearing - via the housing - by loosening the screw. The tip can also be dismantled - two grooves are used for this - see photo.
from 98,09 € with VAT -
Live center 90° - CSN 243324 , Skoda
Morse swivel tip Morse taper: according to the selected variant Other dimensions and parameters - see product description for individual variants Top angle: 90 ° Standard: ČSN 24 3324 The tip has two classic + one needle bearing. The tip can be lubricated from the back of the screw or directly into the bearing - via the housing - by loosening the screw. The tip can also be dismantled - two grooves are used for this - see photo.
from 152,65 € with VAT