T shape

Replacement Inserts VBD TPUN 160308 IC830 Radius 0,8mm Coating: PVD, AlTiN TiN IC830 Series: Suitable for intermittent cutting and roughing of stainless steel, classical steels and heat-resistant alloys. High stiffness and wear resistance. Usage: Steel: P20-P40 Stainless Steel: M25-M35 Superslitz: S15-S30 Terms and conditions - see attached photo Cat. No .: 3308119

VBD TPUN 220412 IC20 IC20 Series: Suitable for routine and finishing operations, roughing of aluminum, cast iron and stainless steel. Uses: Stainless Steel: M10-M25 Cast Iron: K10-K20 Non Ferrous Metals & Plastics: N05-N25 Superslitz: S05-S20 H05- H15 Terms and conditions - see attached photo Kat. No. 05502380

VBD TPUN 110304 IC9054 Radius 0.8mm Coating: CVD, TiCN Al2O3 TiN IC9054 Series: High rigidity, suitable for machining carbon alloys, steel alloys and stainless steel at normal and higher cutting speeds. Usage: Steel: P15-P40 Stainless Steel: M10-M30 Terms and conditions - see attached photo Cat. No .: 5507595

VBD TPUN 220408 IC9054 Radius 0.8mm Coating: CVD, TiCN Al2O3 TiN IC9054 Series: High rigidity, suitable for machining carbon alloys, steel alloys and stainless steel at normal and higher cutting speeds. Usage: Steel: P15-P40 Stainless Steel: M10-M30 Terms and conditions - see attached photo Cat. No .: 5507598

Milling insert VBD TPKN 2204PDTR-42 IC328 Coating: PVD, TiCN IC328 series: Thin PVD coated TiCN layer on carbide P45-K40. Very high rigidity - resistance to chipping. Suitable for machining steels, stainless steels and alloy steels at low to medium speeds, at unstable engagement conditions(spins ovanA1 A ™ ez). Usage: Steel: P25-P50 Stainless steel: M30-M40 Superalloys: S25-S30 Terms and conditions - see attached photo Type -42: Beveled edge -> plates are without radius. Longer plate life. Contact the Company: Kat. Ä. : 5601262 The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Milling insert VBD TPKR 1603PPTR-HS IC328 Coating: PVD, TiCN IC328 series: Thin PVD coated TiCN layer on carbide P45-K40. Very high rigidity - resistance to chipping. Suitable for machining steels, stainless steels and alloy steels at low to medium speeds, at unstable engagement conditions(spins ovanA1 A ™ ez). Usage: Steel: P25-P50 Stainless steel: M30-M40 Superalloys: S25-S30 Terms and conditions - see attached photo Type HS: Type with uneven / stepped blades for chip splitting and lower vibration. Contact the Company: Kat. Ä. : 5601306 The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Milling insert VBD TPKN 1603PPTR-42 IC328 Coating: PVD, TiCN Series IC328: Thin PVD coated TiCN layer on carbide P45-K40. Very high rigidity - resistance to chipping. Suitable for machining steels, stainless steels and alloy steels at low to medium speeds, at unstable engagement conditions(spins ovanA1 A ™ ez). Usage: Steel: P25-P50 Stainless steel: M30-M40 Superalloys: S25-S30 Terms and conditions - see attached photo Type -42: Beveled edge -> plates are without radius. Longer plate life. Contact the Company: Kat. Ä. : 5601315 The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Milling insert VBD TPKR 2204PD-R-76 IC328 Perfect for heavy-duty machining of ordinary and stainless steels on old mills Narex, Vertex etc., low cutting forces, very good surface. Coating: PVD, TiCN IC328 Series : Thin PVD coated TiCN layer on carbide P45-K40. Very high rigidity - resistance to chipping. Suitable for machining steels, stainless steels and alloy steels at low to medium speeds, at unstable engagement conditions(spins ovanA1 A ™ ez). Usage: Steel: P25-P50 Stainless steel: M30-M40 Superalloys: S25-S30 Terms and conditions - see attached photo Type -76: Type with grooves along the cutting edge -> lower heat transfer during roughing. Suitable for intermittent cutting. Contact the Company: Kat. Ä. : 5601816 The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

Milling insert VBD TPKR 2204PDTR-HS IC328 Coating: PVD, TiCN IC328 series: Thin PVD coated TiCN layer on carbide P45-K40. Very high rigidity - resistance to chipping. Suitable for machining steels, stainless steels and alloy steels at low to medium speeds, at unstable engagement conditions(spins ovanA1 A ™ ez). Usage: Steel: P25-P50 Stainless steel: M30-M40 Superalloys: S25-S30 Terms and conditions - see attached photo Type HS: Type with uneven / stepped blades for chip splitting and lower vibration. Contact the Company: Kat. Ä. : 5601816 The price is for 1 piece, not for the whole package, if you want to buy the whole package, put 10 pieces in the basket.

New original replaceable insert in original packaging (10pcs), according to ANSI standard: TPKN 43PDSR Zero Face Angle Size: 22 Thickness: 04 (4,76mm) Angle of Adjustment: P (90 °) Face Angle Angle: D (15 °) Cutting Edge Design: S (Rounded Edge Edge) Feed Feed: R (Right Shift) : S26 (uncoated) Usage: Steel: P15-P30 Cat. No .: 80000677

New Original Interchangeable Insert In Original Package (10pcs), according to ANSI Standard: TPUN 321 Zero Face Angle Size: 16 Thickness: 03 (3.18mm) Radius: 04 (0,4mm) Stainless steel material: H10 (uncoated) Application: Steel: --- Stainless steel: M10- br> Cast iron: K10-K25 Non-Ferrous Metals (Aluminum and Copper): N10-N30 Superslitin (Ni, Co, Fe, Ti)

New original replaceable insert in original packaging (at 10pcs), according to ANSI standard: TPKR 32PDSR Slightly positive face angle > Angle of Adjustment: P (90 °) Face Angle Angle: D (15 °) Cutting Edge Design: S (Rounded Edge Edge) Feed Rate: R (Right Shift) Slit: 8230 Usage: Steel: P20-P40 Stainless Steel: M20-M35 Cast Iron: K20-K40 Non Ferrous Metals (Aluminum & Copper: N15-N30