Shaped milling cutters

Diameter Angular Grooving Cutter 55x100 Angle: 55 ° Diameter Diameter (J 16): 100mm Diameter of Clamping Hole (H7): 27mm Width (J14): 32mm

Disc milling cutter for sprockets For the production of a wheel with the number of teeth: 9-12 teeth Dmax: 80mm Width: 21.2mm Clamping diameter: 32mm Material: HSS Standard: ČSN 222712

Sprocket for sprockets Dmax: 128mm Overall length: 140mm Clamping diameter: 40mm Material: HSS Standard: A „A’ SN 222717.13

Unused - symmetrical double-sided angled end mill with underturned teeth Angle: 30° Diameter of the cutter: 160mm Diameter of the clamping hole: 32mm Width: 25mm Number of teeth: 22 Radius at the top: R2.5 Material: HSS - High-speed steel ČSN 222252.1 / 22 2252.1 Resale - over-standard stocks

Ring cutter - set of 3 cutters (1x roughing 1x semi-roughing 1x finishing) Module: M2.5 Angle: 20° x 10° x 10° Marking on cutters: h=5.625mm, h0 = 12.15, Lw=2381 Diameter: 140mm Clamping diameter: 40mm Material: HSS Standard : ČSN 222512 / 22 2512

Ring cutter - set of 2 roughing and finishing cutters) Module: M4 Angle: 20° x 10° x 10° Marking on cutters: h =9.0mm, h0 = 13.89, Lw=2670 Diameter: 160mm Clamping diameter: 40mm Material: HSS Standard: ČSN 222512 / 22 2512

Ring cutter - set of 2 roughing and finishing cutters) Module: M5 Angle: 20° x 10° x 10° Marking on the cutters: h =11.25mm, h0 = 13.89, Lw=2624 Diameter: 160mm Clamping diameter: 40mm Material: HSS Standard: ČSN 222512 / 22 2512