Reaming and drilling

Plug-in digger with four blades Diameter: 52.5 mm Other dimensions - see attached catalog sheet Clamping hole: 19mm Material: HSS - high-performance high-speed steel Tolerance: nominal dimension in tolerance h8 for the hole with an allowance for more precise machining. Excavator production method: F (milling) Standard: ČSN 221414 or DIN 222N (ISO 3314) CSN 241210 (DIN 217) holders are used for clamping Usage: Machining pre-drilled, cast or pre-pressed holes to achieve higher hole accuracy. Cat. No. : B145250F000S

Taper Reamer 1:50, with Straight Teeth Size: 6mm Shape: B Stopper: Cylindrical with Square Material: HSS - High Speed ??Steel Standard: CSN 22 1469 Use: Hand and machine reaming holes for conical pegs 1:50

Manual taper reamer, with T-handle Enables quick expansion of the hole in softer sheet metal, printed joint, plastic, etc. Use range 5-12mm Material: NO (tool steel) Length of blade 95mm, total length 150mm Operation with included stick or square 10x10mm

Manual reamer of holes, cylindrical shank Czech production, Unused - Abnormal stock ČSN 221420 / CSN 22 1420 Dimensions and tolerances: 9,5H8

120H7 Clamping hole: 50mm Cutting length: 60mm Number of teeth: 6 < Clamping hole with taper 1:30 Teeth with non-uniform pitch Material: HSS - high-speed steel Reamer body made of structural steel. Usage: Machine reaming of holes in ferrous and non-ferrous metals, their alloys and plastics. Czech production, unused - supernormal supplies

Machine reamers, holes, cylindrical shanks Straight blades Czech ČSN 221445 / CSN 22 1445 Dimension and tolerance: 2H7

Machine Reamers, Taper Shank, Straight Teeth with Non-Distal Pitch Dimension & Tolerance: 6H11 Number of Bits: 6 Cone: MK1 Material: HSS Czech production, Unused - Abnormal Stocks Standard: ČSN 221446 / CSN 22 1446, type with short edge - see photo

Machine reamer for Morse taper For reaming Morse taper: MK5 Total length: Standard: ČSN 221466 Czech production, unused - excess stock

Machine reamer for Morse taper For reaming Morse taper: MK6 Total length: Standard: ČSN 221466 Czech production, unused - excess stock

Machine reamer for Morse taper For reaming a Morse taper: MK0 Total length: Standard: ČSN 221466.1 - i.e. the first of the set ( of the set of 3 pcs) Czech production, unused - excess stock

Machine reamer for Morse taper For reaming Morse taper: MK3 Total length: 147mm Standard: ČSN 221466.1 - i.e. the first of the ( set of 3 pcs ) Czech production, unused - excess stock

Machine reamer for Morse taper For reaming a Morse taper: MK4 Total length: Standard: ČSN 221466.1 - i.e. the first of the set ( of the set of 3 pcs) Czech production, unused - excess stock