Reamers
-
Hand with cylindrical shank
-
Construction reamers
-
Machine with cylindrical shank
-
Machine with taper shank
-
Plugged
-
Conical reamers
-
Carbide reamers
-
Carbide reamer with cylindrical shank , type 6301
Machine carbide reamer for holes (holes), morse shank with carbide SK cutting edges, straight teeth Size and tolerance: according to the chosen variant Other dimensions - see descriptions of individual variants Tvrdokov: K10 Reamer body: tool steel Standard: ČSN 221371 / CSN 22 1371 / DIN 8050/6311 Usage: For machine reaming, especially where high cutting speed is required with high precision machined holes and high tool life. Particularly suitable for hard and highly abrasive materials, eg steels, stainless steels, cast iron, refractory materials, titanium alloys Main use: Steel with strength up to 1000N / mm2 Stainless steel Cast iron Aluminum Heat-resistant steel (titanium, etc.) Usable: Steel with strength up to 500N / mm2 Steel with strength up to 1400N / mm2 Copper We can offer other dimensions and tolerances within custom production - contact us.
from 31,73 € with VAT -
Solid carbide reamer with cylindrical shank DIN8093 A
All-carbide machine VHM / TK / SK reamer of holes (holes), cylindrical shank Size and tolerance: according to the chosen variant Other dimensions: see enclosed catalog sheet Standard: DIN8093 / DIN 8093, form A Design: Diameter 2.0 to 20.0 mm - carbide monolith Usage: Steel up to 48 HRC For machine reaming, especially where high cutting speed is required with high precision machined holes and high tool life. Particularly suitable for hard and highly abrasive materials, eg steels, stainless steels, cast iron, refractory materials, titanium alloys If you did not find the average / tolerance you were looking for, write to us - we can offer custom production.
from 43,98 € with VAT -
Solid carbide reamer with cylindrical shank DIN8093 B
All-carbide machine VHM / TK / SK reamer of holes (holes), cylindrical shank Size and tolerance: according to the chosen variant Other dimensions: see enclosed catalog sheet Standard: DIN8093 / DIN 8093, form B Design: Diameter 2.0 to 20.0 mm - carbide monolith Usage: Steel up to 48 HRC For machine reaming, especially where high cutting speed is required with high precision machined holes and high tool life. Particularly suitable for hard and highly abrasive materials, eg steels, stainless steels, cast iron, refractory materials, titanium alloys If you did not find the average / tolerance you were looking for, write to us - we can offer custom production.
from 40,66 € with VAT -
Adjustable reamer 10.32 - 11.11 mm, ČSN 221424
Clearance saleAdjustable reamer without guide sleeve, 221424 Adjustable reamer without guide Range 10,32-11,11 mm Manual reamer revolvers are suitable ONLY for through holes. The edges are reamed gradually, ie the set diameter will be reamed when the reamer passes through the blades. Adjustable reamers are used when finishing machining operations of the cylindrical holes. Recessed holes have a precise dimension, geometric shape and smooth surface. The size of the reamer is continuously variable in the range indicated. The measured dimension is measured over a pair of opposing knives. The commonly supplied geometry of knives is suitable for machining gray cast iron and bronze.
On request21,15 € with VAT -
Adjustable reamer 12.5 - 14.0 mm, ČSN 221424
Clearance saleAdjustable reamer without guide sleeve, 221424 Adjustable reamer without guide Range 12,5-14 mm Revolving hand reamers are suitable ONLY for through holes. The edges are reamed gradually, ie the set diameter will be reamed when the reamer passes through the blades. Adjustable reamers are used when finishing machining operations of the cylindrical holes. Recessed holes have a precise dimension, geometric shape and smooth surface. The size of the reamer is continuously variable in the range indicated. The measured dimension is measured over a pair of opposing knives. The commonly supplied geometry of knives is suitable for machining gray cast iron and bronze.
In stock81,13 € with VAT -
Hand cone reamer 5-12mm with handle
Clearance saleManual taper reamer, with T-handle Enables quick expansion of the hole in softer sheet metal, printed joint, plastic, etc. Use range 5-12mm Material: NO (tool steel) Length of blade 95mm, total length 150mm Operation with included stick or square 10x10mm
In stock6,46 € with VAT -
Reamer 120 H7 socket HSS with screwed knives ČSN 221437, Zbrojovka
120H7 Clamping hole: 50mm Cutting length: 60mm Number of teeth: 6 < Clamping hole with taper 1:30 Teeth with non-uniform pitch Material: HSS - high-speed steel Reamer body made of structural steel. Usage: Machine reaming of holes in ferrous and non-ferrous metals, their alloys and plastics. Czech production, unused - supernormal supplies
In stock117,77 € with VAT -
Reamer 6 H11 machine HSS with taper shank ČSN 221446, Zbrojovka
Clearance saleMachine Reamers, Taper Shank, Straight Teeth with Non-Distal Pitch Dimension & Tolerance: 6H11 Number of Bits: 6 Cone: MK1 Material: HSS Czech production, Unused - Abnormal Stocks Standard: ČSN 221446 / CSN 22 1446, type with short edge - see photo
In stock7,26 € with VAT