Multiple cylindrical front

Roughing end mill, 1 tooth through center with cylindrical shank with groove for weldon clamping Diameter D (k12): according to the selected variant Blade length l: according to the selected variant Total length: according to the selected variant Other dimensions - see the attached catalog sheet Helix angle: 30° Head angle: 12° Material: HSSCo8 (contains 8% cobalt) Standard: DIN 1835 B , DIN 844 N , ISO 1641 , ČSN 222130 ( CSN 22 2130 ) Usage: For machining in 3 axes For materials with a strength of up to 900MPa (for more see the 2nd picture) Type NR: For roughing materials with lower to medium strength (up to 700 Mpa), processing Ra 12.5 and rougher Order no. code - series: 124518 and 125518

Roughing end mill, 1 tooth through center with cylindrical shank with groove for weldon clamping Diameter D (k12): according to the selected variant Blade length l: according to the selected variant Total length: according to the selected variant Other dimensions - see the attached catalog sheet Helix angle: 30° Head angle: 12° Material: HSSCo8 (contains 8% cobalt) Standard: DIN 1835 B , DIN 844 N , ISO 1641 , ČSN 222130 ( CSN 22 2130 ) Usage: For machining in 3 axes For materials with a strength of up to 900MPa (for more see the 2nd picture) Type NR-P : For machining materials with lower to medium strength (up to 700 Mpa), machining Ra 3.2 and rougher, in normal cases it performs the function of a roughing and finishing tool. Order no. code - series: 124518P and 125518P

Roughing end mill, 1 tooth through center with cylindrical shank with groove for weldon clamping Diameter D (k12): according to the selected variant Blade length l: according to the selected variant Total length: according to the selected variant Other dimensions - see the attached catalog sheet Helix angle: 30° Head angle: 10° Material: HSSCo8 (contains 8% cobalt) Standard: DIN 1835 B , DIN 844 N , ISO 1641 , ČSN 222130 ( CSN 22 2130 ) Usage: For machining in 3 axes Low-alloy tool steels up to 1100 MPa High-alloy tool steels up to 1100 MPa Tool and refined steels above 1100 Mpa Cast iron over 240 HB Cr-Ni alloys up to 850 MPa Type HR: For roughing materials with medium to higher strength (up to 1200 Mpa), processing Ra 6.3 and rougher. Order no. code - series: 128518 and 129518

Roughing end mill, 1 tooth through center with cylindrical shank with groove for weldon clamping Diameter D (k12): according to the selected variant Blade length l: according to the selected variant Total length: according to the selected variant Other dimensions - see the attached catalog sheet Helix angle: 30° Head angle: 10° Material: HSSCo8 (contains 8% cobalt) Standard: DIN 1835 B , DIN 844 N , ISO 1641 , ČSN 222130 ( CSN 22 2130 ) Usage: For machining in 3 axes Low-alloy tool steels up to 1100 MPa High-alloy tool steels up to 1100 MPa Tool and refined steels above 1100 Mpa Cast iron over 240 HB Cr-Ni alloys up to 850 MPa Type HR-F: For machining materials with medium to higher strength (up to 1200 Mpa), machining Ra 3.2 and rougher, in normal cases it performs the functions of a roughing and finishing tool. Order no. code - series: 128518P and 129518P

Roughing end mill, 1 tooth through center with cylindrical shank with groove for weldon clamping Diameter D (k12): according to the selected variant Blade length l: according to the selected variant Total length: according to the selected variant Other dimensions - see the attached catalog sheet Helix angle: 30° Head angle: 12° Material: HSSE-PM, AlTiN polish Standard: DIN 1835 B , DIN 844 N , ISO 1641 , ČSN 222130 ( CSN 22 2130 ) Usage: For machining in 3 axes For materials with a strength of up to 900MPa (for more see the 2nd picture) Type NR: For roughing materials with lower to medium strength (up to 700 Mpa), processing Ra 12.5 and rougher Material HSSE-PM : High performance steel produced using powder metallurgy. It has a homogeneous structure, which manifests itself in higher dimensional stability and durability of the tool edge. Suitable for machining high-strength and difficult-to-machine materials such as titanium and its alloys. We supply milling cutters made of this steel with an AlTiN coating as standard. Order no. code - series: 124517 and 125517

Roughing extra short end mill, 1 tooth through center with cylindrical shank with groove for weldon clamping Diameter D (k12): according to the selected variant Blade length l: according to the selected variant Total length: according to the selected variant Other dimensions - see the attached catalog sheet Helix angle: 30° Head angle: 10° Material: HSSCo8 (contains 8% cobalt) Standard: DIN 1835 B , DIN 844 N , ISO 1641 , ČSN 222130 ( CSN 22 2130 ) Usage: For machining in 3 axes Low-alloy tool steels up to 1100 MPa High-alloy tool steels up to 1100 MPa Tool and refined steels above 1100 Mpa Cast iron over 240 HB Cr-Ni alloys up to 850 MPa Extra short row => higher stiffness Type HR: For roughing materials with medium to higher strength (up to 1200 Mpa), processing Ra 6.3 and rougher. Order no. code - series: 128518S

Extra short end mill, with a cylindrical shank with a groove for weldon clamping Diameter D (k10): according to the selected variant Blade length l: according to the selected variant Total length: according to the selected variant Other dimensions - see the attached catalog sheet Material: HSSCo8 (contains 8% cobalt) Helix angle: 30° Head angle: 12° Usage: Automatic and structural steels up to 600 MPa Structural and cast steels up to 850 MPa Low-alloy tool steels up to 1100 MPa Refined steels up to 900 MPa Stainless steel up to 850 MPa Cu-Zn, Cu-Sn alloys up to 800 Mpa Order no. code - series: 120218K

Extra short roughing end mill, with a cylindrical shank with a groove for weldon clamping Diameter D (k10): according to the selected variant Blade length l: according to the selected variant Total length: according to the selected variant Other dimensions - see the attached catalog sheet Material: HSSCo8 (contains 8% cobalt) Helix angle: 30° Head angle: 12° Type NR: For roughing materials with lower to medium strength (up to 700 Mpa), machining Ra 12.5 and rougher. Usage: Automatic and structural steels up to 600 MPa Structural and cast steels up to 850 MPa Refined steels up to 900 MPa Cu-Zn, Cu-Sn alloys up to 800 Mpa Order no. code - series: 124218K

Set of short four-edged cutters with a cross-section item(drill) with weldon face Set contents: 4x11, 5x13, 6x13, 8x19, 10x22, 12x26 mm Tolerance of cutting diameter accuracy: k10 Clamping shanks: 6mm(d4 d5 d6), 10mm(d8 d10), 12mm(d12) Number of threads itA… —: 4 bA… â „c. Material: HSSCo8(contains 8 packages) Standard: DIN 1835 B, DIN 844 N, ISO 1641, ISO 222130(CSN 22 2130) Application: For machining in 3 axes For materials with strength up to 900MPa(for more see Fig. 2) Ord. Code: 120518.SET4-12

Set of short four cutters with item over center(drill) with weldon face Set contents: 6x13, 8x19, 10x22, 12x26, 16x32, 20x38 mm Tolerance of cutting diameter accuracy: k10 Clamping shanks: 6mm(d6), 10mm(d8 d10), 12mm(d12), 16mm(d16), 20mm(d20) Number of nights: 4 days. Material: HSSCo8(contains 8 packages) Standard: DIN 1835 B, DIN 844 N, ISO 1641, ISO 222130(CSN 22 2130) Application: For machining in 3 axes For materials with strength up to 900MPa(for more see Fig. 2) Ord. Code: 120518.SET6-20

Four-edge / four-tooth end mill 10x22 mm ( 10x22mm ) , 2 teeth through the center with a cylindrical shank with a groove for weldon clamping, type F Diameter D (x10) : 10 mm Length blade l : 22mm Clamping shank d (h6) : 10mm Total length : 72mm Number of blades : 4 pcs. ( 4 pcs. ) Material: HSSCo8 ( contains 8% cobalt ) Standard: DIN 844, ISO 1641 Use: For machining in 3 axes For materials with strength up to 900MPa(more see 2nd picture)Type F: For machining materials with lower to medium strength(up to 700Mpa), machining Ra 3.2 and rougher , in normal cases it performs the function of a roughing and finishing tool. The cutter comes from above-standard stock as a custom production, the cutter can be without laser marking. Order no. code : 122618F.100(custom production)

Four-edge / four-tooth end mill 15x26 mm ( 15x26mm ) , 2 teeth through the center with a cylindrical shank with a groove for weldon clamping, type F Diameter D (x10) : 15 mm Length blade l: 26mm Clamping shank d (h6): 12mm Total length: 83mm Number of blades: 4 pcs. ( 4 pcs. ) Material: HSSCo8 ( contains 8% cobalt ) Standard: DIN 844, ISO 1641 Use: For machining in 3 axes For materials with strength up to 900MPa(more see 2nd picture)Type F: For machining materials with lower to medium strength(up to 700Mpa), machining Ra 3.2 and rougher , in normal cases it performs the function of a roughing and finishing tool. The cutter comes from above-standard stock as a custom production, the cutter can be without laser marking. Order no. code : 122618F.150(custom production)