Milling
-
Cutters
-
Collet chucks and collets
-
Reduction sleeve for milling machine
-
Saw blades
-
Milling arbors
-
Weldon holders
-
Clamping collets straight
-
Cutters for cutters
-
Freezer pads (for vices)
-
Boring heads
-
Retractable pins for cars. exchange
-
Spare parts for milling machines
-
Set of collets ER25 - 1-16mm(16pcs), accuracy 0.005mm, DIN6499B UP
Set of 16 ER 25 collets on wooden board, ER25 collets Diameters: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16 mm The collets can be clamped: * To a diameter of 2.5 mm by 0.5 mm * From 3mm diameter to 1.0mm Accuracy: 0.005mm Standard: DIN 6499B / 430EP Collet clamping procedure: Snap the collet into the clamping nut - according to the attached picture.
In stock189,17 € with VAT -
Set of stainless steel collets ER25 - 2-16mm(15pcs), DIN6499B
Set of 15 pcs of ER 25 collets made of stainless steel on wooden board, ER25 collets Diameters: 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16 mm Pliers can be clamped: - Up to 2.5 mm diameter 0.5 mm - From 3 mm diameter 1.0 mm Accuracy: 0.005 mm Material: INOX / stainless steel Standard: DIN 6499B / 430ESP Collet clamping procedure: Snap the collet into the clamping nut - according to the attached picture.
In stock342,13 € with VAT -
Set of collets ER32 - 3-20mm(18pcs), accuracy 0.005mm, DIN6499B UP
Set of 18 ER 32 collets on wooden board, ER32 collets Diameters: 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20 mm Collets can be clamped: * To a diameter of 2.5 mm by 0, 5mm * From 3mm to 1.0mm diameter Accuracy: 0.005mm Standard: DIN 6499B / 470EP tiny: Snap the collet into the clamping nut - according to the attached picture.
In stock275,54 € with VAT -
Set of sealed collets ER32 - 3-20mm(18pcs)
Set of 18 pcs of ER 32 colletted collet for use with tools with internal cooling, ER32 collet Diameters: 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 16, 17, 18, 19, 20 mm Collet clamping: Screw the clamp into the clamping nut - according to the attached picture.
In stock409,61 € with VAT -
Set of stainless steel collets ER32 - 3-20mm(18pcs), DIN6499B
Set of 18 pcs of ER 32 collets made of stainless steel on wooden board, ER32 collets Diameters: 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20 mm Pliers can be clamped: - Up to 2.5 mm diameter 0.5 mm - From 3 mm diameter 1.0 mm Accuracy : 0,005mm Material: INOX / stainless steel Standard: DIN 6499B / 470ESP Collet clamping procedure: Snap the collet into the clamping nut - according to the attached picture .
In stock463,65 € with VAT -
Collet set ER40 - 3-26mm (24pcs) , accuracy 0.015mm , DIN6499B
Set of 21 collets ER 40 on a wooden board, collets ER40 Diameters: 3 , 4 , 5 , 6 , 7 , 8 , 9 , 10 , 11 , 12 , 13 , 14 , 15 , 16 , 17 , 18 . 0.015mm Standard: DIN 6499B / 470E Procedure for clamping the collet: Snap the collet into the clamping nut - according to the attached picture.
In stock246,09 € with VAT -
Set of sealed collets ER40 - 3-26mm(24pcs)
Set of 24 sealed collets ER 40 for use with tools with internal cooling, collets ER40 Diameters: 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14 , 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26 mm Collet clamping procedure: Snap the collet into the clamping nut - according to the attached picture. standards Standard: DIN6499C / 472EA Max. pressure tested by the manufacturer: 40bar Tools with internal cooling are not produced with a shank smaller than 3mm, so this set starts from a diameter of 3mm.
In stock601,12 € with VAT -
Corner milling cutter 25mm x 150mm 10x VBD ADMT 160612R-F56 ??WSP45S Walter
Recommended ✓Set AKKO 10 pcs WALTER ADMT 160612R-F56 ??WSP45S WALTER * Length 150mm without internal cooling! Diameter: 25mm Angle: 90 ° Number of Cuts: 2 Clamping Diameter: 25 mm Overall Length: 150 mm Working Length: 50 mm VBD Cutting Edge: 15mm Bolts: 1515-M4x9 / T15 Type VBD: 1) ADMT 1606 Packaging incl. 10pcs VBD ADMT 160612R-F56 ??WST45S Steel: P30-P50 Stainless Steel: M30-M50 Superslitin (Ni, Co, Fe, Ti): S30-S50 AKKO MAKINA drilling mowers are an economical and at the same time very high quality solution for your production. Heat-treated milling body material, special heat-resistant coating and aggressive materials, precision machining of the body and insert bush, and the Swiss SFS joint material guarantee the quality and long life of AKKO tools.
On request174,97 € with VAT -
Corner milling cutter 32mm x 150mm 10x VBD ADMT 160612R-F56 ??WSP45S Walter
Recommended ✓Set AKKO 10 pcs WALTER ADMT 160612R-F56 ??WSP45S WALTER * Length 150mm without internal cooling! Diameter: 32mm Angle: 90 ° Number of Cuts: 3 Clamping Diameter: 32 mm Overall Length: 150 mm Working Length: 50 mm VBD Cutting Edge: 15mm Bolts: 1515-M4x9 / T15 Type VBD: 1) ADMT 1606 Packaging incl. 10pcs VBD ADMT 160612R-F56 ??WST45S Steel: P30-P50 Stainless Steel: M30-M50 Superslitin (Ni, Co, Fe, Ti): S30-S50 AKKO MAKINA drilling mowers are an economical and at the same time very high quality solution for your production. Heat-treated milling body material, special heat-resistant coating and aggressive materials, precision machining of the body and insert bush, and the Swiss SFS joint material guarantee the quality and long life of AKKO tools.
On request192,44 € with VAT